Introducing the BitFenix Shinobi XL

We've had a remarkably heavy backlog of cases in house in desperate need of review over the past couple of months, and one of the standouts has been BitFenix's Shinobi XL. We were generally pretty pleased with the original Shinobi when we first reviewed it. Seventy bucks for a solid budget enclosure with great styling was a killer deal, and the enclosure itself has a lot of room to grow for the budding enthusiast. As it turns out, the Shinobi has been a pretty big hit for BitFenix. Big enough, in fact, that they decided it needed to go...bigger.

And so it did. BitFenix released the Shinobi XL earlier this year, but reviews for it have been fairly scarce and even a little bit dismissive in some cases. We have an opportunity here to rectify that and determine if the newer, larger Shinobi lives up to the legacy of its little brother, or if BitFenix has lost some of the magic in enlarging their budget design.

It's most definitely bigger. While the Shinobi was a standard ATX case (and a fairly small one at that), the Shinobi XL is all-in, with nine expansion slots and able to support XL-ATX motherboards. While it shares a lot of the design language of its predecessor, the larger scale allows two of the fans to be upgraded to 200mm parts. I'm not sure bigger is necessarily better, though.

BitFenix Shinobi XL Specifications
Motherboard Form Factor Mini-ITX, Micro ATX, ATX, XL-ATX
Drive Bays External 5x 5.25” (incl. one 5.25"-to-3.5" adapter bay)
Internal 7x 2.5"/3.5"
Cooling Front 1x 230mm intake fan (supports 3x 120mm)
Rear 1x 120mm exhaust fan (supports 140mm)
Top 1x 230mm exhaust fan (supports 2x 230mm or 3x 120mm)
Side -
Bottom 1x 140mm intake fan
Expansion Slots 9
I/O Port 4x USB 3.0, 1x USB (power only), 1x Headphone, 1x Mic
Power Supply Size Standard ATX
Clearances HSF 181 mm
PSU 200 mm
GPU 13.1" / 334mm
Dimensions 22.44" x 9.65" x 21.93"
570mm x 245mm x 557mm
Special Features USB 3.0 connectivity via internal headers (included USB 2.0 adaptor cables)
Support for dual 360mm radiators and one 240mm radiator
Price $159

Unfortunately I don't have a weight statistic for the BitFenix Shinobi XL other than "it's heavy." The chassis really is in many ways just a giant Shinobi, with a steel frame and then the soft-touch plastic finish. What's also a bit alarming is the price tag: at $159, the Shinobi XL is more than twice as expensive as its predecessor, making it an unusual heir to the Shinobi throne.

As a bit of good news, though, BitFenix cases are now finally available on NewEgg. I'm actually personally really happy to see this, as it both raises the profile of BitFenix and also makes more widely available what I consider some of the best budget cases available.

In and Around the BitFenix Shinobi XL
POST A COMMENT

29 Comments

View All Comments

  • Chaitanya - Tuesday, June 26, 2012 - link

    BitFenix has some really good cases and they innovate when it comes to bringing new cases to market. Reply
  • Pennanen - Tuesday, June 26, 2012 - link

    And what exactly has bitfenix given to the case markets? Assuming you werent sarcastic. Reply
  • xbournex - Tuesday, June 26, 2012 - link

    SuperCharge, SofTouch, Prodigy, stock water cooling support, brightest LED strips, most dense sleeving extensions, first internet connectivity fan controller, and unnecessary flashy in-your-face look cases. Reply
  • Pennanen - Tuesday, June 26, 2012 - link

    Sorry i wasnt specific enought.

    What useful things have bitfenix given to the markets?
    Reply
  • killerclick - Sunday, July 15, 2012 - link

    Lack of girlfriend detected. Reply
  • cjs150 - Tuesday, June 26, 2012 - link

    But the review is nice and thorough

    Dustin you really hit the nail "modern conventions are far from perfect and there's a lot of room for improvement".

    As an example, the case is wide - why not turn the PSU 90 degrees and have the cables feeding directly into the area behind the motherboard. Lian Li at least experiment with different locations.

    I would love to see a case where there is a built in power splitter for the 5.25 bays and Hard drive cages so one molex cable goes to a daughter board which has several socket to run short cables up to the hard drives for example - a bit of imagination would result in a very neat cabling job.

    This case really excels for watercooling. Perfect for using a 200x200 mm radiatior (or even 2, front and top)
    Reply
  • xbournex - Tuesday, June 26, 2012 - link

    The review compares a mATX case 2/3 of the price of this case, an aluminum case with almost no water cooling support that's 2x the price, and ambient temperatures that vary with each review resulting in a default temperature, and noise level being already higher, or lower.

    The case was designed for watercooling in mind, which the reviewer poorly covered. Not thorough if you ask me.
    Reply
  • xbournex - Tuesday, June 26, 2012 - link

    not as thorough as it could be** Reply
  • Olaf van der Spek - Tuesday, June 26, 2012 - link

    Hey xbournex,

    Anandtech doesn't test watercooling as far as I know.

    When can we expect some BitFenix mATX cases? :p
    Reply
  • cjs150 - Tuesday, June 26, 2012 - link

    Must admit I cannot remember Anandtech reviewing watercooling either.

    Watercooling is a niche for those who like to have a bit of fun and get their hands dirty (I think that should read "wet") on the innards of their computer.

    I love it, but I know it is not very everyone.

    The case looks as though it would be very good for watercooling possible even better than the legend that is the Silverstone TJ07. Certainly more than capable of cooling two hot running GPUs, a seriously overclocked CPU and maybe even the RAM as well without really breaking sweat. So would be pretty quiet compared to trying to air cool that lot
    Reply

Log in

Don't have an account? Sign up now