Intel "boxed" heatsink
 

If you buy an Intel "boxed" CPU, it will ship with a cooler. Depending on the CPU, the cooler model varies. We have tested the cooler that is included with the PPGA Celeron 533, which should probably be the most efficient among the "boxed" coolers, since the PPGA 533 has the highest cooling requirements of all Celeron CPUs.

Both heatsink and fan are relatively small. Since Intel, like any other CPU manufacturer, doesn't encourage overclocking, it is clear that they didn't design the included heatsink with overclocking in mind.
 


 


 



The fan
 
 

The Nidec fan, spinning at 3900 rpm, is very good quality. It isn't extremely loud; calling it "quiet" would be exaggerated though.
 
 

Installation
 
 

The fixation clip of the boxed heatsink is very cheap and hard to uninstall. The cooler comes with a preinstalled thermal pad. Removing the pad and replacing it with high quality thermal compound dropped the temperature of the test CPU by 8°C!

 

Conclusion
 
 

The performance of the "boxed" heatsink isn't convincing at all. Overclockers should definitely replace their boxed heatsink with a better cooler - or, even better, buy a non-boxed CPU and a good heatsink separately.

If you already own such a heatsink, then a good and cheap method to improve cooling is to scratch off the thermal pad and apply a thin layer of thermal compound instead.

 
Intel "boxed" cooler
Fans: One Nidec
Fan rpm: 3877
Weight: 140g
Height: 45mm
DIMM slots blocked on P3B-F: 0 (!)
Price: n/a
Advantages
  • good quality fan, not very loud
  • doesn't block any DIMM slots when installed on a slotket
Disadvantages
  • not recommended for overclocking
RDJD P715 Final Words
Comments Locked

0 Comments

View All Comments

Log in

Don't have an account? Sign up now