Dawn of War II

Dawn of War II is much like our other RTS: Battleforge. At maximum quality it’s not playable on the 5450 or similar cards, so we have to turn the settings way down to get a playable framerate. Here we had to go to 1024 at the lowest settings to break 30fps on the 5450.

HAWX Resident Evil 5
Comments Locked

77 Comments

View All Comments

  • Purri - Monday, March 8, 2010 - link

    Ok, so i read a lot of comments that the cheap passive DP-Adapters wont work for a EyeFinity 3 Monitor setup.

    But, can i use this card for a 3 monitor windows-desktop setup without eyefinity - or do i need an expensive adapter for this too?

    I'm looking for a cheapish, passivly(silent) cooled card that supports 3 monitors for windows applications, that has enough performance to play a few old games now and then (like quake3) on 1 monitor.

    Will this card work?
  • waqarshigri - Wednesday, December 4, 2013 - link

    yes of course it has amd eyefinity technology .... i played new games on it like nfs run,call of duty MW3, battlefield 3,
  • plopke - Friday, February 5, 2010 - link

    :o what about the 5830 , wasn't it delayed until the 5th. It is suddenly very quiet about it on all techsite. And not launched today.
  • yyrkoon - Thursday, February 4, 2010 - link

    Your charts are all buggered up. Just looking over the charts, in Crysis: Warhead, you test the nvidia 9600GT for performance. Ok fine. Then we move a long to the Power consumption charts, and you omit the 9600GT for the 9500GT ? Better still, we move to both heat tests, and both of these card are omitted.

    WTH ?! Come on guys, is there something wrong with a bit of consistency ?
  • Ryan Smith - Friday, February 5, 2010 - link

    Some of those cards are out of Anand's personal collection, and I don't have a matching card. We have near-identical hardware that produces the same performance numbers; however we can't replicate the power/noise/temperature data due to differences in cases and environment.

    So I can put his cards in our performance tests, but I can't use his cards for power/temp/noise testing. It's not perfect, but it allows us to bring you the most data we can.
  • yyrkoon - Friday, February 5, 2010 - link

    Well, the only real gripe that I have here is that I actually own a 9600GT. Since we moved last year, and are completely off grid ( solar / wind ), I would have liked to compare power consumption between the two. Without having to actually buy something to find out.

    Oh well, nothing can be done about it now I suppose.

    I can say however that a 9600GT in a P35 system with a Core 2 E6550, 4GB of ram, and 4 Seagate barracudas uses ~167-168W idle. While gaming, the most CPU/GPU intensive games for me were world in conflict, and Hellgate: London. The two games "sucked down" 220-227W at the wall. This system was also moderately over clocked to get the memory and "FSB" at 1:1. Also these numbers are pretty close, but not super accurate, But as close as I can come eyeballing a kill-a-watt while trying to create a few numbers. The power supply was an 80Plus 500W variant. Manufactured by Seasonic if anyone must know( Antec EarthWATTS 500 ).
  • yyrkoon - Friday, February 5, 2010 - link

    Ah I forgot. The numbers I gave for the "complete" system at the wall included powering a 19" WS LCD that consistently uses 23W.
  • dagamer34 - Thursday, February 4, 2010 - link

    Where's the low-profile 5650?? I don't want to downgrade my 4650 to a 5450 just for HD bitstreaming. =/
  • Roy2001 - Thursday, February 4, 2010 - link

    Video game is on XBOX360 and Wii, so i3-530 for $117 is a better solution for me. It supports bitstream through HDMI too. My 2 cents.
  • Taft12 - Thursday, February 4, 2010 - link

    I apologize if this has been confirmed already, but does this mean we won't see a chip from ATI that falls between 5450 and 5670?

    There were four GPUs in this range last gen (4350, 4550, 4650, 4670)

Log in

Don't have an account? Sign up now