Ethernet Performance

The current motherboard test suite includes LAN performance measurements. All of these boards utilize PCI Express controllers with the only difference being the supplier of the core logic.

The Windows 2000 Driver Development Kit (DDK) includes a useful LAN testing utility called NTttcp. We used the NTttcp tool to test Ethernet throughput and the CPU utilization of the various Ethernet Controllers used on the Intel motherboards.

We set up one machine as the server; in this test, an Intel system with an Intel CSA Gigabit LAN connection. Intel CSA has a reputation for providing fast throughput and this seemed a reasonable choice to serve our Gigabit LAN clients.


At the server side, we used the following Command Line as suggested by the VIA whitepaper on LAN testing:
Ntttcpr -m 4 ,0,‹server IP› -a 4 -l 256000 -n 30000
On the client side (the motherboard under test), we used the following Command Line:
Ntttcps -m 4 ,0,‹client IP› -a 4 -l 256000 -n 30000
At the conclusion of the test, we captured the throughput and CPU utilization figures from the client screen.

Ethernet Throughput

Ethernet Overhead

The M1697 natively supports 10/100Mb/s Ethernet operations, so Epox utilizes the PCI based Realtek RTL8201CL 10/100Mb/s Ethernet PHY for this purpose. ASRock was able to utilize a discreet PCI-E Gigabit solution on their ULi board and we feel that Epox should have followed suit or at least offered a PCI Gigabit Ethernet option on this board model.

Obviously, the performance of the 10/100 Realtek PHY is not competitive with the Gigabit based solutions with an average throughput of 98.9Mb/s. Also rather odd is the CPU usage required for this throughput. Most 100 Mbit connections require very little in the way of CPU time, due to the much lower bandwidth requirements.

All standard Ethernet tests were performed with standard frames and the NVIDIA Active Armor suite disabled unless otherwise noted. Gigabit Ethernet supports Jumbo frames as well and provides a further reduction in CPU overhead.

Firewire and USB Performance Audio Performance
Comments Locked

35 Comments

View All Comments

  • custommadename - Sunday, March 19, 2006 - link

    I thought so, but I wanted to make sure. That's great. So this board is pretty much a good overclocking board for a great price. I'm hooked.
  • UJMA - Friday, March 24, 2006 - link

    When released the "J " version of this board sports both Gb Ethernet and 8 Channel ALC850 Audio. Look for the EPoX EP-9U1697GLI-J ... I'm definitely getting this mobo.
  • Gary Key - Friday, March 24, 2006 - link

    quote:

    Look for the EPoX EP-9U1697GLI-J .....


    We still do not have confirmation if this model will be released in the US. We certainly have expressed our feelings to EPoX that this is the model that should be offered here. Also, the ALC-850 is not real upgrade from a quality of audio output aspect compared to the ALC-655. We lobbied for the ALC-883 as the cost differential is minimal compared to the ALC-850 but EPoX is betting most people buying the board will upgrade the audio for gaming anyway. We think the ALC-883 would still suffice for the casual gamer and probably for the more serious gamer on a budget from a performance/audio output aspect. It is hard to get excited about a SB X-FI when it cost $30 more than the motherboard in this market segment in our opinion. We think this is still an issue. Overall, the quality of the board is very good and the results speak for themselves.
  • UJMA - Friday, March 24, 2006 - link

    Pretty sure we'll get the "J" version in Europe, "J" versions are available on other Epox models over here. Also glad to see that the Epox board was not unduly handicapped by x8 lane PCI-E as opposed to x16 lane. All in all, even in the bog standard guise, it's a very good board for the money.

    Good review by the way!

  • superkdogg - Friday, March 17, 2006 - link

    ^^^^^^^

    Those numbers are the initial value the memory will run if the HTT is 200. They all scale based on the HTT speed, so 1:1 = 200. All the other numbers are dividers that allow for running the memory at a ratio speed based on the HTT i.e. 133/200 = 4/6.
  • custommadename - Friday, March 17, 2006 - link

    The memory speeds in the review were Auto, 100 MHz, 133MHz, 160MHz, 200MHz, 218 MHz, 240MHz. Is there a 1:1 setting so that the ram speed increases with the FSB? It would be a shame not to have that seeing as how the ram can be overvoltaged to 3.2V
  • superkdogg - Thursday, March 16, 2006 - link

    Hey, this board looks great! The main drawbacks are the two silly component choices: no Gb ethernet and no HD sound (not like Nv boards have this anyway). Since my home network is 10/100 and I'm not an sound freak (and I have some 5.1 digital Live! cards to throw in if need be) those aren't drawbacks.

    I have a A8R-MVP that rectifies those problems at the cost of high vCore options.....pm me if you want to trade :P
  • kmmatney - Wednesday, March 15, 2006 - link

    Its great having low cost Socket 939 boards, but where are the Socket 939 Semprons?
  • Per Hansson - Wednesday, March 15, 2006 - link

    Since Epox has had so many issues in the past with using poor capacitors (sorry I mistyped that, I mean crap capacitors) From GSC and TEAPO I think it deserves a mention that this board is using high quality Sanyo MV-WX capacitors for the VRM section and everything 1000uF and above on the board, and even not cheaping out on the lower value caps by using the top capacitor brand Rubycon for them...

    And if the editor can not distinguish from a good and bad capacitor brand please atleast post high resolution pictures of the capacitors so people looking for the info will find it without being as wierd as I am and recognize them by the style of their vents and type of colors used ;-)
  • Gary Key - Wednesday, March 15, 2006 - link

    quote:

    And if the editor can not distinguish from a good and bad capacitor brand please atleast post high resolution pictures of the capacitors so people looking for the info will find it without being as wierd as I am and recognize them by the style of their vents and type of colors used ;-)


    We did make mention on the front page and the features page about the high quality components used on the board. However, we did not specify the brand names or sizes utilized. We will do this in the future if the components selected warrants mention as it would assist the readers without your (not weird) ability to pick out the brand names. I did take a high resolution shot of the capacitors as I surprised by Epox utilizing these on a value board. I should have followed my instincts and posted the shot on the first or last page. Thanks for the comments. :)

Log in

Don't have an account? Sign up now