Installation

Installation of all of the components was a bit easier in this case than in many other cases. There weren't that many wires hanging around waiting to be plugged in or just getting in the way, which made it easier to install components such as the motherboard.

The power supply was also easier to install, since it came in directly through the back. Unlike the Tsunami Dream that we looked at a few weeks ago, where we had to remove the auxiliary ports to get the power supply in, the back plate on the Temjin 6 was removable to insert the power supply.




Click to enlarge.


From that point on, everything else was a breeze to install. The total time for installation was about 7-9 minutes. We did notice one thing, however, with the HDD bay - the amount of clearance on the left side between the left side panel and the installed HDDs. There was barely enough room for wiring, especially if a 4-pin molex power connector is required for an IDE hard drive. We used a Seagate SATA drive, which wasn't too much of a problem, but nevertheless, we do recommend using L-type data cables to reduce bending of the cables.




Click to enlarge.


Motherboard Tray Benchmarking - Thermal
Comments Locked

28 Comments

View All Comments

  • Bonedoc1983 - Saturday, November 13, 2004 - link

    Opps, regarding my LAST post.. the motherboard WAS a NEO2 Plat (MSI K8N - CPU placement is bad for this case) - sorry for the mistake.
  • Bonedoc1983 - Saturday, November 13, 2004 - link

    Just build one of these.
    Of note:
    Noise, stock AMD FX-53 Heatsink/FAN (no o/c) was okay. PC sits on floor, barely audible.
    HOWEVER the stock CPU/Heatsink (as described) does NOT clear the TUNNEL.. it tweaks it and puts a lot of pressure onto the CPU/heatsink combination. Not good. I had to remove the tunnel. Did not want it rubbing so hard onto the fan body.
    Still get decent temps, but a bummer.
    Otherwise, quiet, strong case (heavy) and overall great install, large inside and easy to work.
    HDs in vertical vs Horizontal do not seem a p
  • threedd97 - Wednesday, October 6, 2004 - link

    I own this case. I won it for free from SystemCooling.com. It's extremely nice. The only problems I experienced were my Cool Drive 4 would not mount at all with the brackets or screws. The way they instruct you to feed PSU cables to the motherboard and other devices is extremely hard to pull off and make it work without a ton of cluster between the motherboard tray and the left panel. Also, the 120mm fans are rated at 2200RPM, but my CD4 displays them running at 1080RPM.
  • Neco - Wednesday, September 29, 2004 - link

    To #18 about trying the this case with the MSI Neo2 Platinum...you are right. The CPU placement is too high and the wind tunnel won't let you place a heatsink/fan on the processor.
  • TimTheEnchanter25 - Wednesday, September 29, 2004 - link

    I didn't see anything wrong with the review. I've been trying to decide between the 5 and the 6 series and the temp results convinced me to go with this one.

    With all 3 fans running at only 21db, I can't see how anyone can be concerned with the sound.

    I plan on adding another 120mm intake fan over the video card and possibly another 120mm exhust fan at the top between the psu and the top 5 1/4 drive.

    Also, I can't find any info on the distance from the cpu to the plastic tunnel. I want to know if a "tower" cooler will fit. I'm thinking about going with the AeroCool HT-101, I think it is 76mm high. I plan on throwing 2 80 mm fans on that to boost the wind tunnel even more.
  • muddocktor - Wednesday, September 29, 2004 - link

    I thought the review was well done myself, except it would have been nice to see video card temps. However, I don't guess you checked that in the other cases tested so that's OK. One thing that kind of bothered me in the review though was Purav Sanghani's assertations that "everyone is looking forward to BTX". I for one, don't see why the motherboard form factor needs to be changed and this case proves my point; you can get the same cooling effect of BTX without changing mobo form factors and making everyone start over from scratch when they upgrade to a new motherboard. Other than that, good review, Purav.
  • MEDISIN - Tuesday, September 28, 2004 - link

    Obviously comparing past benchmarks which included the PC-V1000 with a different test bed is pointless. I was asking why you didn't install the CPU/GPU/RAM/PSU you used in the Temjin 6 into a PC-V1000 and benchmark it like the rest of the cases you included.

    So what your saying is you didn't have a PC-V1000 available when you wrote this article. That's too bad - seeing as how it is the only other case (besides the PC-V1100) that I know of with the same upside-down orientation. It would have been nice to see if Silver Stone could outperform the best of Lian Li. Believe me, they couldn't, but it would have been nice to see anyway.
  • PuravSanghani - Monday, September 27, 2004 - link

    MEDISIN:

    "Mentioned - yes, but why was it not included in the thermal benchmarks?! Being the only other case available with the upside-down orientation, wouldn't it make sense to compare it to the Temjin 6 in both thermal and noise?"

    What i meant to say was that the V1000 was the only other case we looked at with this new BTX style. We did not include the V1000 in the charts because of the fact that we have changed our test bed since the PC-V1000 and it would be like comparing apples to oranges.

    Same goes for that last statement, the difference in test beds kept us from comparing both cases' benchmarks, we were only comparing those cases with basically the same CPU/GPU/RAM/PSU combination.

    Hope that helps!

    Purav
  • MEDISIN - Monday, September 27, 2004 - link

    In the conclusion Purav writes:

    "The only other case to which the Temjin 6 can be compared in the market right now is Lian Li's PC-V1000, which we mentioned numerous times in this review."

    Mentioned - yes, but why was it not included in the thermal benchmarks?! Being the only other case available with the upside-down orientation, wouldn't it make sense to compare it to the Temjin 6 in both thermal and noise?

    Or what about the statement: "Temjin 6...overall, performs much better." when its performance was never compared to the PC-V1000???
  • karrock - Monday, September 27, 2004 - link

    "Hideous spider cases"...

    Chenbro Xpider
    http://www.systemcooling.com/chenbro_xpider_ii-01....

Log in

Don't have an account? Sign up now