AnandTech: Micro-ATX Cases - Shoebox Showdown

PC Design Lab Qmicra - Exterior

U.S. based PC Design Lab has only one case to their name so far, and its name is the Qmicra. The case, just like the company, is different from just about everything else out there. When talking to PC Design Lab, one this is for certain - this company is very serious about creating the highest quality product possible, period. Citing poor layout designs and sometimes downright shoddy workmanship as motivations for designing a better small form PC case, designer and company owner Dave LaLopa made it clear that the Qmicra does many things unconventionally in the interest of making a superior final product.

Click to enlarge

The Qmicra's construction is considerably different from pretty much anything else because its strength comes from the exoskeleton - not from any internal bracing. When fully assembled, one feels confident that the computer could take a serious amount of abuse without the internals suffering much damage. Entirely manufactured and assembled in the USA, the case is also a fine example of what high-quality craftsmanship entails.

Click to enlarge

As for the external styling of the case, the Qmicra understandably takes most of its cues from the currently popular minimalist philosophies. The front is just solid brushed aluminum with an eighth-inch thick sheet of Plexiglas in front for the glossy sheen and added protection. Two 5.25" and one 3.5" external bays offer the typical "upper limit" drive flexibility for this size system, and only the essential power and reset buttons are present. Even the almost-always-present front-mounted ports are missing, but the 3.5" bay would be perfect for those that feel they are absolutely critical. We were told that newer versions of the case will have nicer looking reset buttons that better match the theme and current power button (center). At the bottom of the front panel are two perforations for the front 80mm fan intakes.

Click to enlarge

Matching the two front intake positions are the two 80mm rear exhaust vents, allowing for a generous amount of airflow for any case in this class, especially taking into account the full-sized power supply as well. Notice how the mounting points for the power supply are perfectly symmetrical too, so there is no concern that flipping a PSU upside down will make it less stable. Instead of a recessed motherboard, the Qmicra positions the board as rearward as possible, with the expansion card mounting tabs actually sticking further beyond the rest of the rear of the case. The perfectly centered power supply mount makes the case not only look nice but also allows for the distinctive rounded top corners.

Click to enlarge

Together, the four thumbscrews pull the front and rear plates to just the right position using the two long aluminum rods. The five-sided, one-piece cover seals against the rest of the case thanks to a soft rubber strip and is held firmly in place by both the pressure from the rods and the four unique screw-in feet.

Click to enlarge

The fit and finish of the Qmicra is certainly as high-quality as any other case we've ever dealt with. Every part feels solid and well-made, and the fit of each part couldn't be better. The brushed aluminum finish itself is fantastic - it's not prone to fingerprints, yet it can still be cleaned easily if needed. It's anodized so it won't make things dirty by simply rubbing against them, and it's just thick enough to be strong without adding weight - an empty Qmicra is feather light. More information on the Qmicra is available on PCDL's website.