Conclusion: Different Beast

I'm of a hundred different minds when it comes to evaluating the NZXT H630. When I saw the prototype illustrations toward the end of March, I immediately envisioned an amazing enclosure. Yet like any great imaginary love affair, my ideal for the H630 was very different from the reality. That's not to denigrate the H630, but it can be difficult to separate the product that is from the product that could have been.

Keeping with tradition, we'll evaluate the product that is on its own merits. First, I'm incredibly taken just by the way the H630 looks. From any vendor this aesthetic would be a pleasant surprise, but from NZXT? The "stormtrooper" styling of the Phantom cases has always been just this side of gaudy (though it does shrink down amusingly for the 430), and though the Switch 810 has been a solid performer for NZXT it's still had a hard time reconciling asymmetry with genuine style. The H630 gets it.

Build quality is, drive sleds notwithstanding, uniformly excellent. The case is 30 pounds to begin with, I can't in good conscience ding them for using a plastic shell that keeps it from being any more needlessly heavy. That, and again, it's obviously not a major detriment or even really a minor one. It's how good plastic should look and feel. This is a strong, sturdy case, with smart material choices all around, and outside of the excessively difficult front panel that came with my pre-production model, it's easy to build in and has almost all of the features I could ask for. (Cue gripe about the lack of an integrated fan controller.)

Where the H630 runs into trouble is the same place most acoustically-geared cases tend to: cooling. Thermal performance is good, but acoustics could actually be greatly improved. I'm not ready to suggest closing off the top ventilation to try and keep noise from escaping, but I think the H630 really brings to light the same problem that plagues NZXT's Kraken coolers: NZXT fans are kind of middling. The fans Nanoxia uses on the Deep Silence 1 and 2 are extremely efficient, but they're also so quiet that fan control isn't really needed on those cases (though it's available.) Running a 200mm intake fan in the H630 is a smart idea, but it needed to be slower and less audible.

Alternatively I'd almost suggest NZXT take the hit to the wallet and include two 200mm intakes at lower speeds, as I imagine it could only improve performance, potentially substantially. Good airflow is in many ways key to keeping noise levels down, as it keeps internal cooling from having to work too hard. Really, though, NZXT needs to source or design more efficient fans for all of their product lines. They don't need to start courting Noctua, but this is one place where there's real room for improvement.

As for the chassis itself, it's a very strong first outing for what's actually a somewhat unconventional approach to silent cooling. The H630 doesn't feel like quite the knockout that the Phantom 630 was, but there's a tremendous amount of potential here. NZXT needs to figure out a proper balancing act for this case, as I can see a revision being an absolute terror to compete with.

At $149 the H630 isn't bargain priced, but it's not at all unreasonable for what you get either. Until the Deep Silence 1 becomes more readily available in the United States again, you're looking at an unusual split of recommendations. For most users I think the still readily available Deep Silence 2 is going to be the value champion; at $89, it's practically a steal for what you get. The H630's real competitor may be the Fractal Design Define XL R2, and I can see arguments for going in either direction. Personally, I think the H630 is more forward thinking and has more potential than the XL R2, though the XL R2 definitely has its own merits. Evaluate your own needs, but if you think the H630 is what you're looking for, I'd say buy it with confidence.

Noise and Thermal Testing
Comments Locked

27 Comments

View All Comments

  • Blibbax - Tuesday, May 14, 2013 - link

    How is it louder at load stock than it is overclocked?
  • Dustin Sklavos - Tuesday, May 14, 2013 - link

    Margin of error.
  • hero1 - Tuesday, May 14, 2013 - link

    This is the case for me even though I already own the FDD XL R2 atm. I had posted on another site months ago asking for this exact type of case 3x120 front and top and 2x140 at the bottom, fewer front bays and sound dumping materials. Looks like NZXT listened and delivered. The acoustics are not a problem considering that I, and many others, will buy this case for water cooling builds. One thing I wish they did is have perforations on both sides of the door and get air from both directions.
  • Trefugl - Tuesday, May 14, 2013 - link

    I'm also interested in this case for use with watercooling. I was having a hard time trying to figure out how much room there is for a 3x120 on the front though... Can anyone comment on radiator mounting in this case?
  • Dustin Sklavos - Tuesday, May 14, 2013 - link

    You can pull the drive cages and mounts entirely to install a 3x120.
  • hero1 - Thursday, May 16, 2013 - link

    And that's what I intend to do with it. I wonder when we are going to see this beast in stock.
  • hero1 - Thursday, May 16, 2013 - link

    One thing I don't like about the FDD XL R2 is the thin sound deadening materials. I want something like 5mm thick. That way I can use a 5mm thick acrylic panel for a window mod. I hope they have thicker materials for this one!
  • JDG1980 - Tuesday, May 14, 2013 - link

    The Nanoxia DS1 would be a stronger competitor to the H630 if you could, you know, actually buy one.

    I understand that Anandtech can't test cases in every possible configuration, but I think results might have been better if the top drive cage had been removed (as was done on the Fractal Design Define R4 review), and the 200mm front fan moved from the bottom mount to the top. This would enable the intake airflow to cover a large portion of the motherboard, including the graphics card (if installed). In the configuration you use, the airflow mostly blows at the back end of the PSU. I have no idea why NZXT put the fan in the bottom mount by default; it doesn't make much sense to me.

    I'd love to see how this does with the top drive cage removed and a Silverstone 180mm Air Penetrator in the top mount. (You might need zip-ties or extra holes drilled for this one, though.) The AP182 has its own analog fan controller, which would also help with noise.
  • Subyman - Tuesday, May 14, 2013 - link

    Did anyone else think the top of the front panel looked like a giant hinge for a door? I was surprised when the author noted that it did not have a door. I thought those two openings on the front folded down when the optical drive came out. I really like my 550D, door and all ;)
  • angryblanket - Tuesday, May 14, 2013 - link

    Very subtle and not flashy, just how I like em. Out of my price point though.

Log in

Don't have an account? Sign up now