Capsule Review: Logitech's G100s, G500s, and G700s Gaming Mice
by Dustin Sklavos on March 30, 2013 12:01 AM EST- Posted in
- Mouse
- Peripherals
- Gaming
- Logitech
The Logitech G-Series Software
One thing peripheral vendors have been notoriously awful about has been software. I was never especially happy with the software Corsair uses, to say nothing of Thermaltake's and even Logitech's older software. The old G500 used the SetPoint software kit, separate from their gaming software, but with the new G series, all of the new mice and keyboards fall under a single unified software umbrella. This is immensely appreciated, as most vendors are using separate drivers and software for each of their products.
As it turns out, the G-series software is pretty good, too, and remarkably simple. Someone at Logitech seems to have decided that existing software was too clunky or not functional enough, because this software is lightweight and incredibly easy to use.
.jpg)
Strangely, the G100s is the only one of the three mice tested that has more than one configuration page; one page handles the DPI levels while the second handles the limited button configuration. It seems really bizarre that they would take that approach with this mouse, as it's unnecessarily involved. Nonetheless, the software is very simple and intuitive, something that will be consistent across these three products.
.jpg)
When you get to the G500s, you see most of the same functions as the G100s but lose some granularity in the sensor; the "Advanced" settings are all gone. The first window actually lets you choose between storing your settings in the mouse's on-board memory or storing them in software; from there it takes you to the single configuration window. Changing a button's setting is as easy as clicking on that button in the window, where a dropbox lets you choose between using the default or going to a page that lets you assign a macro, key, or basic mouse function (including multimedia controls.)
.jpg)
Finally, the G700s ups the ante one more time by allowing you to store and toggle between up to five different profiles, but other than that it's essentially identical to the configuration options for the G500s. It does add the ability to choose a power mode, and I found the Max Gaming mode was enough to make the wireless connection undetectable; under the other two, there's just a little bit of perceptible lag even with the mouse right next to the receiver.
This is really clean, well made software and a major step forward for Logitech. If it loses anything, it's that it's not as robust as the ridiculously configurable Kone mice from ROCCAT. Those mice use illumination to identify different profiles, and they're frankly still going to be almost ideal for users who want to get as much utility out of their mice as humanly possible.
Facebook
Twitter
RSS
95 Comments
View All Comments
mgl888 - Saturday, March 30, 2013 - link
One thing I hate about the Logitech software is the game/application detection. The software has trouble detecting whether I'm playing the game or tabbed out and the profile do not change accordingly.chanman - Saturday, March 30, 2013 - link
My main mouse is a well-used 5-year old Microsoft Sidewinder (the left-click sensor seems like its starting to go - it occasionally registers single clicks as doubles). The feature I enjoy the most on it that doesn't seem to be offered on newer mice (and Microsoft's office mouse line now that they've again discontinued the Sidewinder branding) are the vertically stacked thumb buttons. I love it and wish it was a feature that others making non-ambidextrous mice would use more often.rms - Sunday, March 31, 2013 - link
I also used a Sidewinder for years, but as I'm a claw/fingertip person the thumb buttons were too far forward. Wish they were adjustable! And in general I find thumb buttons to be unusable on any mouse I've ever seenzehoo - Saturday, March 30, 2013 - link
The g100 looks like an mx300, finally they are releasing a mouse with this shape again. I still use my mx300 it was such a great mouse. Only difference seems to be the feet.dbcoopernz - Saturday, March 30, 2013 - link
Do any of them have automatic switching between click to click and freewheeling mousewheel scrolling modes, like the original MX Revolution has?Dustin Sklavos - Saturday, March 30, 2013 - link
No, and that makes me sad all day. :(The MX Revolution's automatic switching was fantastic, I wish they'd use it more.
B3an - Saturday, March 30, 2013 - link
Dustin, it's disappointing you didn't compare the G500s or 700s to the Roccat Pure and Kone XTD that you reviewed recently. You seemed to like the Pure/Kone XTD a lot. What are your thoughts?Tracking benchmarks would also be nice, and maybe tests on different surfaces. Don't think you go in to enough detail in these reviews.
I went from a G500 to the Kone XTD and think it's superior is pretty much every way, including software. The improvements Logitech have made here don't seem to be enough to make any of these new mice as good as the Kone XTD.
The new markings on the Logitech mice look tacky and i can see them starting to wear off after a few months, which ALWAYS happens with every Logitech mouse i've had that has a coating/markings on it (usually silver, always comes off). You end up with a worn down ugly mouse. Any mouse that has this, especially around the buttons, should instantly get marked down for such a ridiculously obvious design flaw.
Dustin Sklavos - Saturday, March 30, 2013 - link
Truthfully I'm on the fence about whether I want to jump to the G500s or G700s or stick with the Kone XTD which is occupying my desktop presently. The coatings on the G500s and G700s don't generate as much raunchy handsweat as the XTD and they have the toggle freewheel, but the XTD's software is so ridiculously good it's tough to choose.That and the XTD *totally* matches my K90.
piiman - Wednesday, March 19, 2014 - link
I almost bought one of these but I couldn't tell if the wheel had a free spin mode and a good percentage reported wheel problems soon after buying.DarKHawK - Saturday, March 30, 2013 - link
I'm interested in knowing what exactly did they do with the internals. I got my G700 as soon as it was released. The micro-switches gave way about a year later. They are omoron brand made in china. Replaced those with omoron made in Japan and they are working ever since. If any one have more technical info about what Logitech really did under the hood please share.