BitFenix Raider Case Review: All These Little Things
by Dustin Sklavos on February 28, 2013 12:01 PM EST- Posted in
- Cases/Cooling/PSUs
- bitfenix
- ATX
Noise and Thermal Testing
Honestly, by the time I was done assembling the BitFenix Raider, I wasn't sure how to feel about the case itself, let alone have any expectations as to how it might perform. As it turns out, there's a reasonably potent enclosure design hiding out here if you're willing to extract it.
Ambient temperature during testing was around 22C. The Raider was tested with the middle drive cage's panel removed, and with the analog fan controller at both its lowest and highest settings.
The Raider's low fan setting doesn't move a heck of a lot of air and the case puts in a mediocre showing as a result, but running the fans at full bore produces pretty competitive thermal results.
Despite all the hemming and hawing I do about fan controllers, the BitFenix Raider runs into the same "issue" Nanoxia's cases do: the fans included are so quiet and efficient on their own that cutting their speed is pointless. The Raider's Spectre fans are almost inaudible at their highest setting and produce far superior airflow, so there's no real reason to turn them down.
The Raider was able to produce competitive if not spectacular performance with our stock testbed, so naturally I was a little more curious to see how it would handle the increased thermal load of our overclocked bed.
The Raider's not great, but it's still competitive if you ignore the low fan setting.
Once again, the "quieter" fan setting turns out to have the opposite effect, while the higher one produces noise results that are competitive without being exceptional.
Facebook
Twitter
RSS
26 Comments
View All Comments
c0d1f1ed - Thursday, February 28, 2013 - link
I have this case and I quite like it. Indeed the feet aren't screwed on but use good quality sticky tape, which doesn't bother me one bit since it sits on the floor all day anyway. It might even help with the noise! Also indeed the cabling is tight, but I actually like that. It took some care to route things but I don't intend to change/add things often. The fans that are pre-installed are of high quality and the speed control is built in. Very silent even on high, and I consider myself sensitive to that.My only minor complaint is that the power LED is too bright. It's not matte but shines like a keyhole finder LED. Fixed that by cutting a corner out of a sticker and placing it over it. All-in-all a very minor thing to make it pretty close to my ideal case.
jminneman - Thursday, February 28, 2013 - link
I mean seriously. Why, in this day and age, would I ever have a need for 4 5.25" bays? I can see the need for having 1 on any case, or 2 on larger cases (full height and bigger).My preference would be to lose all 5.25" bays. I never touch a CD/DVD/BluRay any more at all. If there is a way for me to download it or get in on USB that is what I prefer and it is only getting more common every day.
Certainly I understand there are edge cases that require more than 1 or 2, but just imagine what you could do with that area freed up. Imagine how many 3.5 bays could fit in the space of 4 5.25" bays. That would be one slick storage case.
killerclick - Friday, March 1, 2013 - link
Get a smaller case if 5.25" bays bother you. I use 2, one for the optical drive (all my backups are on DVDs), one for my 3.5" drive that I put in an elastic sling to stop it from spreading vibrations inside the case. Since the fan controller lever on the case started crapping out, I'm thinking of adding a PWM on one of the 5.25" drive bays, so then 3/4 will be in use.rickon66 - Thursday, February 28, 2013 - link
It looks like they got tired of putting the Antec 1100 on the charts, seeing as how it kicks all the other cases butts time after time.Dustin Sklavos - Thursday, February 28, 2013 - link
Actually, I have my results spreadsheet broken down into sub-$100, $100-$149, and then $150 and above. The 1100 hangs out between $100 and $149. ;)bill4 - Thursday, February 28, 2013 - link
Anyone noticed EVERY SINGLE review this guy does is negative?I mean, what a shocker, he didn't like this case!
And he always uses the old line negative reviewers use at the end, some variation of "there are better options". Sometimes he names these, sometimes he doesnt.
Well if there are better options, why dont you review them! And if there are good products, and presumably you've reviewed some of them, then why are all your reviews negative??!! If these better competing products exist, then where are your positive reviews?
Pbryanw - Thursday, February 28, 2013 - link
Really? I can't tell if you're serious or trolling?For a positive review read his assessment of the Nanoxia 1 in which he positively purrs about the case. Ok, so he's critical of a lot of cases, but I'd rather have someone who errs on the side of negativity, than someone who thinks every case is great and so gets 8/10 or some kind of award.
What I think it comes down to is Dustin is looking for that perfect case, and when a case falls short like this Betfenix, he quite rightly points out where they've gone wrong and I prefer this approach. I imagine it's also good feedback for the designers of these cases.
WeaselITB - Friday, March 1, 2013 - link
Seriously? Are you new here?Just from the past couple of months --
Fractal Design Define XL R2 -- generally positive
http://www.anandtech.com/show/6764/fractal-design-...
Nanoxia Deep Silence 2 -- positive
http://www.anandtech.com/show/6742/nanoxia-deep-si...
Corsair Carbide 200R -- positive except for drive cage
http://www.anandtech.com/show/6515/corsair-carbide...
Nanoxia Deep Silence 1 -- positive, Bronze Editor's Choice
http://www.anandtech.com/show/6479/nanoxia-deep-si...
NZXT Phantom 820 -- positive, Bronze Editor's Choice
http://www.anandtech.com/show/6367/nzxt-phantom-82...
And those are just the ones that I could remember the conclusion after having re-read the title of the review. If something's wrong with the case, he calls them out on it, which I like. I just wish he'd start using bigger than mATX (I kid, I kid! :-p)
-Weasel
tecknurd - Friday, March 1, 2013 - link
""Their breakout product has probably been the Prodigy (which got picked up by almost every boutique under the sun), but really, they've had great stuff for a while now.""Really, do tell. After getting the BitFenix Prodigy, it actually lost my expectations. It just sucks, it just sucks, it just sucks. I replace it with a lot better case such as the Lian Li PC-V354.
There are so many reasons why it suck. I did review of the BitFenix Prodigy on newegg, so you can read it there. What BitFenix only has is they got style, but quality is their lowest priority or is not part of the engineering process.
lmcd - Friday, March 1, 2013 - link
which color, what's your name, etc.Thanks for the worthless comment. You didn't even refer to your own review well.
Bitfenix isn't bad; there are far worse and Bitfenix has many great ideas in all of their cases.