TrueCrypt 7.1 Benchmark

TrueCrypt is a software application used for on-the-fly encryption (OTFE). It is free, open source and offers full AES-NI support. The application also features a built-in encryption benchmark that we can use to measure CPU performance. First we test with the AES algorithm (256-bit key, symmetric).

TrueCrypt AES

We also test with the heaviest combination of the cascaded algorithms available: Serpent-Twofish-AES.

TrueCrypt AES-Twofish-Serpent

Intel has the fastest implementation when you are using a simple AES encryption or decryption; the Xeon 2660 is more than 30% faster than the best Opterons. This aspect of the architecture has not been improved in the "Piledriver" core.

However, when we apply the slowest encryption algorithms, Twofish and Serpent, the Piledriver core is no less than 4% to 6% faster than the older Bulldozer core clock per clock. The total speedup (6380 vs 6276) is no less than 13% to 15%.

We are no experts in encryption/decryption algorithms, so we cannot explain these differences. However, it is important to realize that these benchmarks are synthetic. In the best case, encryption will determine a few tens of percent of the total performance of a website.

LS-DYNA Power Consumption Compression and Decompression
Comments Locked

55 Comments

View All Comments

  • arnd - Wednesday, February 20, 2013 - link

    I have dual Opteron 6344 workstation system, which tends to be either near complete idle or near complete busy, so C states are extremely important to me. The CPU has power sensors that are exposed in Linux using the 'sensors' tool. With C6 enabled, I get the power consumption per socket down to 42 Watts, which still seems like a lot, but disabling C6 made it jump to 104W per socket, when under 100% load it is constantly within 1W of the 115W TDP limit.
    I did not see a significant impact of C1E, neither with C6 enabled nor disabled, presumably because I rarely have cores that are idle for a short period.
    More annoying to me is the lack of S3 suspend mode, the system still consumes around 100W on S1.
  • nevertell - Wednesday, February 20, 2013 - link

    The difference I believe is that you cannot use AES-NI instructions when using Twofish and serpent. I guess that AMD's AES-NI implementation is just slower.
  • JohanAnandtech - Wednesday, February 20, 2013 - link

    Sounds reasonable. The question is then why Twofish and serpent are so fast on the Opteron. They probably scale very well with cores.
  • Yorgos - Wednesday, February 20, 2013 - link

    I've been abandoning tech sites due to stupid posters and internet trolls.
    There is so much addition info and questions in the comments and I don't know why are you letting people ruin that feature from your site?
    You should make a ranking system(similar to /. ) for users, in order to automatically hide someone's comments, so we don't have to double check every time the poster and/or the comment.

    I feel stupid for making that type of comment, also reading specific stupid opinions, below that article.
  • silverblue - Wednesday, February 20, 2013 - link

    I like your ideas, however most of the laugh (or should I say cringe?) worthy comments would be hidden and the entertainment value would be tainted by having to click the Show button all the time. ;)
  • lwatcdr - Wednesday, February 20, 2013 - link

    Or requiring real names.
  • JohanAnandtech - Wednesday, February 20, 2013 - link

    I had meetings and people visiting me, so I could not "baby sit" the reactions. But if you don't react to the offensive message we can delete them. So the best way to deal with th trolls is to ignore. Sooner or later, they will be banned.
  • coder111 - Wednesday, February 20, 2013 - link

    Because some of the people posting here are obviously trolling for Intel and do not bring anything constructive to the discussion.
  • MonkeyPaw - Wednesday, February 20, 2013 - link

    Yes, it is quite pathetic. An ignore button would take care of this situation nicely.
  • iamezza - Wednesday, February 20, 2013 - link

    An ignore button and a report button would be great!

Log in

Don't have an account? Sign up now