Nanoxia Deep Silence 1 Case Review: You Asked For It, You Got It
by Dustin Sklavos on November 27, 2012 12:01 AM EST- Posted in
- Cases/Cooling/PSUs
- quiet
- ATX
- Nanoxia
Assembling the Nanoxia Deep Silence 1
While Nanoxia's Deep Silence 1 has a fairly smart layout and is reasonably convenient, there are were still a couple of hangups when I went to assemble our testbed inside it. There weren't any major issues, just a series of small annoyances.
The motherboard went in easy enough, but I would've appreciated a center-mounted guide post similar to how I've seen in recent cases (including BitFenix's Ghost), and I had an unusually difficult time getting the motherboard's I/O shield to snap into place. Routing case headers to the motherboard was also mostly easy, but there's nothing inside the DS1 that keeps the cables from slipping into the optical drive bays; you pretty much have to have an optical drive installed to keep that clean. Depending on how you route the cables and if you removed the top panel at any point, you may also find that the I/O hinge at the top of the case actually sticks. Nanoxia says they've already solved the problem, so hopefully if the DS1 gets to retail in the United States end users won't run into it.
.jpg)
Installing the optical drive and SSD was pain free. Toolless installation of the optical drive was easy and Nanoxia smartly includes toolless clamps on both sides of the drive; better still, the drive bay shields are similar to the snap-in ones that NZXT uses, which feature a locking lever. The drive sleds themselves are durable metal with rubber vibration grommets for 3.5" drives, but they're not toolless; both 2.5" and 3.5" drives need to be screwed into place. Thankfully the sleds themselves fit securely into the drive cages.
_thumb.jpg)
_thumb.jpg)
_thumb.jpg)
_thumb.jpg)
_thumb.jpg)
_thumb.jpg)
Getting the power supply in, on the other hand, proved to be more challenging than it needed to be. Nanoxia features two rubber studs that hold up the back of ther power supply, but there's no guide for the front of it, causing it to easily dip and thus requiring some Arm Fu to get the PSU lined up and screwed into place. This could've been avoided by just putting a slight lip inside the case to hold up the front.
.jpg)
The graphics card was also difficult. I'm used to having to bow either the bracket or the case to get everything to line up, but the DS1 required more force than I expected. This can be kind of a crap shoot, but it feels like the measurements here were ever so slightly off.
.jpg)
Thankfully, getting everything wired together was fairly easy apart from two minor complaints. The routing holes in the motherboard tray are all very intelligently aligned and spacious enough, and the grommets themselves stay securely in place. My only issues were the aggravatingly small hole for routing the AUX 12V line above the motherboard tray where I accidentally snapped one of the clamps after it got caught on a rivet, and the use of a molex connector for the fan controller instead of a SATA power connector.
Finally putting the side panels back on wound up being easier than I expected given the old style notched mounting system Nanoxia uses to lock them in place. They include a healthy amount of space for routing cables behind the motherboard tray, though they'd do well to consider dedicating cabling channels around it similar to how Corsair designed the Vengeance C70. Doing so could make the DS1 that much easier to wire and keep neat.
Facebook
Twitter
RSS
75 Comments
View All Comments
abhicherath - Wednesday, November 28, 2012 - link
instead of:(similar to what BitFenix enjoys)I think you mean, bitfenix employs.
Great review!
stren - Wednesday, November 28, 2012 - link
Any interest in anandtech reviewing a CaseLabs case? I know real water cooling is a bit too "enthusiast" for this site, but still might be a nice to compare an SM8 with the Corsair 900D when/if it launches. Although I'm planning to do that myself anyway, it would be nice to see the professional/mainstream view also.LV3 - Wednesday, November 28, 2012 - link
I want this case! Hope it comes to the US soon, at least before Haswell.LarryDan - Friday, November 30, 2012 - link
Dustin: thanks for the "requested" review! It was very insightful and objective, and helped with my decision. I'll be buying one as soon as it becomes available at NewEgg; and BTW, I prefer the Anthracite version also.NewEgg just replied to my e-mail inquiry as to when it will be available on their Web site, and their response was "hopefully by Jan. 2013".
batguiide - Sunday, December 9, 2012 - link
Sharea website with you ,
( socanpower. ca)
Believe you will love it.
laptop battery,CPU fan,AC power adapters.DC power adapters and laptop keyboard.
I bought two. Cheap, good quality, you can
go and ship with there.
jjwa - Wednesday, December 12, 2012 - link
How much air intake is left from the front if I would put a 3.5" HDD in each HDD slide (and I would probably install 4 in the 3x5.25" bays too :P). From the pictures in the review I don't really have an idea how much space would be left around the HDDs. Thanks!amber03 - Wednesday, December 12, 2012 - link
After reading this review I built a home office/home server using 2012 essentials in this case. My boot drive is a samsung 840 and I have put in 6 x WD red 3 TB drives. Air flow seems fine and I am running it at low setting. Case is extremely quiet and cool.I used i3770s for cpu and there is no gpu installed.
vanwazltoff - Thursday, December 20, 2012 - link
at the end of the day its still what you like the most and what you get for the dollar. i REALLY like fractal cases and the fact that they are coming out with new cases and revisions and constantly make their products better is a very admirable quality. i have a define r3 an i love it, getting a node 304 for xmas. i would also buy a bitfenix ghost, if i had to choose between this case, a ghost or a define r4 id probably get the r4, the second choice would be the ghostDenniSys1 - Thursday, December 27, 2012 - link
Should be able to crowd source a silent PC system. It may not look like your PC. It should be 99% silent, and very cheap. There's nothing that dictates that sound baffling has to be dense and heavy. Airflow, aka cooling, does not need to be generated by noisy fan blades or even push air.There are lots of different materials to use for a case, and it does not need to be rectangular inside or out. Sound travels, so lets move it somewhere. Sound vibration that is put to work can be transformed into a melody, even a symphony, or it can be effortlessly extinguished.
Overall, a silent PC system should have been defacto 10 years ago. It is an engineering problem that does not require traveling faster than light. Throw a lamp shade over your PC for a second. It's already quieter.
qiankun - Tuesday, March 26, 2013 - link
One question: why does nowadays drive cages all facing side way, other than that it provides easier wire routing?For someone with a lot of drives (8 in my case), the side way cages will totally block the front two intakes. Maybe I shall stick with my P180 where drives are very well cooled by the front fans.