SilverStone Sugo SG05: The Mini-ITX Standard Bearer
by Dustin Sklavos on August 19, 2012 12:01 AM EST- Posted in
- SilverStone
- Mini ITX
- Cases/Cooling/PSUs
- HTPC
Testing Methodology
For testing Mini-ITX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise.
| Mini-ITX Test Configuration | |
| CPU |
Intel Core i3-2120 (65W TDP) |
| Motherboard | Zotac Z68ITX-A-E |
| Graphics Card |
Intel HD 2000 IGP Zotac GeForce GTS 450 Eco (dedicated) ASUS GeForce GTX 560 Ti DCII TOP (dedicated extra) |
| Memory | 2x2GB Crucial Ballistix Smart Tracer DDR3-1600 |
| Drives |
Kingston SSDNow V+ 100 64GB SSD SilverStone Slimline DVD+/-RW Drive |
| CPU Cooler | SilverStone NT07-1156 with Cooler Master ThermalFusion 400 |
| Power Supply | Included 450W 80 Plus Bronze PSU |
Each case is tested with just the Core i3's integrated graphics as well as with a discrete graphics card. The system is powered on and left idle for fifteen minutes, the thermal and acoustic results recorded, and then stressed by running four threads (three with a dedicated GPU) in Prime95 (in-place large FFTs) on the CPU, and OC Scanner (maximum load) is run when the dedicated GPU is installed. At the end of fiteen minutes, thermal and acoustic results are recorded. If the enclosure has a fan controller, these tests are repeated for each setting. Ambient temperature is also measured after the fifteen idle minutes but before the stress test and used to calculate the final reported results.
We try to maintain an ambient testing temperature of between 22C and 24C. Non-thermal test results aren't going to be directly comparable to the finest decimal point, but should be roughly comparable and give a broader idea of how the enclosure performs.
Thank You!
Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our testbed.
- Thank you to Puget Systems for providing us with the Intel Core i3-2120.
- Thank you to Zotac for providing us with the Z68ITX-A-E motherboard and GeForce GTS 450 Eco.
- Thank you to Crucial for providing us with the Ballistix Smart Tracer memory.
- Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
- And thank you to SilverStone for providing us with the NT07-1156 heatsink/fan combo.
Facebook
Twitter
RSS
70 Comments
View All Comments
UpSpin - Sunday, August 19, 2012 - link
If you don't change the PSU fan and use it as it is, it will get audible and noisy if you tax the PC.However, I changed the PSU fan to a 120mm one and build a new case for the PSU which guides the air, speed regulated every fan, dampened the noise of the HDDs and bought the EVGA GTX560Ti, which is based on the NVidia reference design, which uses a very quite fan. And unlike more silent looking GTX560Ti cards, the stock NVidia design also cools the VRM, thus the fan speed can get reduced further without issues and doesn't ramp up as fast as the more silent looking designs. I also modded the GPU Bios to run the fan at lower speeds and undervolt the GPU.
But you're right, I can hear it if I'm working alone, because of the GPU fan and the open design of the Sugo case. Not because of the air flow but because of the GPU fan's bearing, which is still very very quiet. I haven't found the time to replace this fan with a higher quality one. It's not annoying, because it's really silent and at a low frequency, but yeah, still audible if the environment is silent.
Jackattak - Sunday, August 19, 2012 - link
I would go with the drawer idea personally. PCs sitting on desks suck. It doesn't matter how quiet you get it, you will notice the noise while sitting at the desk alone in the room. And anyone who is in IT or Development or any other mentally demanding job will tell you, even normally mild or even nearly unnoticeable noises can cause you great frustration.I like the idea of putting this in a sliding drawer. That way when you needed to work on the machine's innards you could just slide it out and pop the cover and work right at your desk. And when you're actually using the PC within, you could slide it back to the end of the desk, and if you mounted the drawer underneath the desk, you'd never notice it.
Great review as always, Dustin. I have built about a dozen PCs (for myself, that is) but I haven't done it since 2003! I've been buying Dell XPS systems since then, as it was worth it to me to purchase fully assembled products with generally nice cases, believe it or not, rather than going through the rigamarole of purchasing all the separate parts and praying to the gods that everything works well with everything else. The manufacturer mashups can be pretty frightening. At any rate, your review here makes me want to buy one of these as I've had increasing interest in mini-ITX systems as of late. Might just have to workout a project plan! :-)
doctormonroe - Sunday, August 19, 2012 - link
What happened to the photo galleries?Dustin Sklavos - Sunday, August 19, 2012 - link
We had a bug in the system with them; adding galleries now.Conficio - Sunday, August 19, 2012 - link
"the general industry tend towards smaller"Meaker10 - Sunday, August 19, 2012 - link
An OCed 680M stays along side a stock clocked GTX670 :DGrok42 - Sunday, August 19, 2012 - link
I am so glad to see more reviews of mITX cases. I believe as the reviewer does that these cases are the future of enclosures. I also believe that optical drives are legacy drives as well. All the reviews of mITX cases come to the same conclusion that the external bays seriously compromise the overall design of the case. Small cases are always going to be a set of trade offs but it seems obvious the trade off should be to remove the external bays but not a single case does. It seems so obvious that improved thermal and acoustic performance is more important than the ability to have an optical drive that is used once or twice in the life of the system.If your taking requests for future reviews I would nominate the Lian Li PC-Q16A. I'm worried it doesn't support a discrete GPU at which point I would retract my request. I can't find any information or reviews about it of any depth so I can't be sure if it does or not.
JoanSpark - Monday, August 20, 2012 - link
+1there is not a single mITX/mATX case out there without an external (optical) drive bay.
Not a single case maker is producing a box where you can put in a mb, a gpu, some 2.5/3.5 drive(s) and call it a day.
You get countless towers, med towers, mini towers etc with numerous external bays in all kinds of styles and colours.. but not a single case without an external drive bay.
Pathetic.
Zap - Monday, August 20, 2012 - link
Check out the Lian Li PC-Q25 series. It is like the PC-Q08, except supporting more 3.5" drives and no external drive bay. And yes, gigantic graphics cards are supported.Alternately, for those who don't need discrete GPUs there are plenty of mITX cases which don't have external drive bays.
JoanSpark - Saturday, August 25, 2012 - link
I stand corrected.Thx for the pointer, very interesting.