Testing Methodology

For testing Mini-ITX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise.

Mini-ITX Test Configuration
CPU Intel Core i3-2120
(65W TDP)
Motherboard Zotac Z68ITX-A-E
Graphics Card Intel HD 2000 IGP

Zotac GeForce GTS 450 Eco (dedicated)

ASUS GeForce GTX 560 Ti DCII TOP (dedicated extra)
Memory 2x2GB Crucial Ballistix Smart Tracer DDR3-1600
Drives Kingston SSDNow V+ 100 64GB SSD
SilverStone Slimline DVD+/-RW Drive
CPU Cooler SilverStone NT07-1156 with Cooler Master ThermalFusion 400
Power Supply Included 450W 80 Plus Bronze PSU

Each case is tested with just the Core i3's integrated graphics as well as with a discrete graphics card. The system is powered on and left idle for fifteen minutes, the thermal and acoustic results recorded, and then stressed by running four threads (three with a dedicated GPU) in Prime95 (in-place large FFTs) on the CPU, and OC Scanner (maximum load) is run when the dedicated GPU is installed. At the end of fiteen minutes, thermal and acoustic results are recorded. If the enclosure has a fan controller, these tests are repeated for each setting. Ambient temperature is also measured after the fifteen idle minutes but before the stress test and used to calculate the final reported results.

We try to maintain an ambient testing temperature of between 22C and 24C. Non-thermal test results aren't going to be directly comparable to the finest decimal point, but should be roughly comparable and give a broader idea of how the enclosure performs.

Thank You!

Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our testbed.

Assembling the SilverStone Sugo SG05 Noise and Thermal Testing, IGP
Comments Locked

70 Comments

View All Comments

  • Dustin Sklavos - Sunday, August 19, 2012 - link

    You do, but the power connector for slimline optical drives is weird to begin with and unique to them. The one I tested with (provided by SilverStone) actually included the adapter.
  • Zap - Monday, August 20, 2012 - link

    Slimline optical drives use a slimline power connector:

    http://en.wikipedia.org/wiki/Serial_ATA#Slimline_c...

    In the past Silverstone did NOT provide these, and it cost around $10+shipping to buy one from Newegg.

    Dustin, can you verify with your Silverstone contact that these new versions DO come with the required connector or adapter?

    It would be best if the connector was actually built into the PSU wiring harness, something which Antec was able to do with their ISK 300 and ISK 310 series cases. I don't see why Silverstone has been unable to do that, since they should be able to tell the PSU manufacturer (FSP) to include the required connector.
  • Zap - Wednesday, September 26, 2012 - link

    UPDATE:

    I purchased the latest SG05-450-USB3 (exact one as in the review) and it did NOT come with the power connector/adapter for the slim optical drive.

    Silverstone, you have FAILED again. Antec was able to include one in their ISK 300/310 series which use slim optical drives. Why can't you guys?
  • AgeOfPanic - Sunday, August 19, 2012 - link

    I have owned this particular case in the 300 watt variety. I found the included PSU way too loud for a case like this. To me the cool thing about mini ITX is having a nice small case with enough horse power for most tasks. I now own a Lian Li case that fits a full ATX PSU and is only slightly larger. It is completely inaudible though. No room for extra video card. My advice would be to choose a case that fits your needs, but definitely a full ATX power supply.
  • randinspace - Sunday, August 19, 2012 - link

    Which Lian Li case?
  • londiste - Monday, August 20, 2012 - link

    try pc-q08b
  • AgeOfPanic - Monday, August 20, 2012 - link

    I own the Lian Li PC-Q07B. It's higher, but not as deep as the Silverstone. It also misses the front audio connectors and no USB 3.0, but these were not deal breakers for me. The case is really quiet though.
  • spcarr - Sunday, August 19, 2012 - link

    I own this and its bigger brother, the SG07. They are both great cases and love them both.

    The problem I have is that, in the end, they are still 'too big' to just sit on top of the desk next to your monitor (like the mac mini). So they sit on the ground like other cases (where they look silly) or you buy yourself a small drawer for them to sit on top of. I did the latter, so I at least have a bunch of storage for the small things. But they still take up just as much floor space as a tower, imho.

    What do other people do? Where do you place your beautiful sugo cases?
  • UpSpin - Sunday, August 19, 2012 - link

    I have a large desk which also goes around a corner. Because the desk is in front of a window and I don't want that the 24" monitor obscures the light from the window on the desk I placed the monitor in this corner, so I have more and brighter space for work and the monitor with keyboard don't waste that much space.
    Diagonal behind the monitor I placed the Sugo case. It fits perfectly there, looks great and the cabels don't have a long way, so they are almost invisible, too.
  • Jackattak - Sunday, August 19, 2012 - link

    So based on your earlier post (above) it must be audible if/when you're working alone? Just curious.

Log in

Don't have an account? Sign up now