Cooler Master Elite 120 Advanced Case Review: Little in Almost Every Way
by Dustin Sklavos on July 26, 2012 3:01 AM EST- Posted in
- Mini ITX
- Cases/Cooling/PSUs
- Cooler Master
Testing Methodology
For testing Mini-ITX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise. Again, note that while the GD07 can technically fit a full-size ATX motherboard, it's not tall enough to allow for our testbed's tower cooler. Because of the discrepancies that would make for in testing, plus the fact that media center cases are often mini-ITX designs, we have chosen to use our mini-ITX testbed rather than going with a specialized (e.g. not something you can compare directly to our other cases) ATX build.
| Mini-ITX Test Configuration | |
| CPU |
Intel Core i3-2120 (65W TDP) |
| Motherboard | Zotac Z68ITX-A-E |
| Graphics Card |
Intel HD 2000 IGP Zotac GeForce GTS 450 Eco (dedicated) ASUS GeForce GTX 560 Ti DCII TOP (dedicated extra) |
| Memory | 2x2GB Crucial Ballistix Smart Tracer DDR3-1600 |
| Drives |
Kingston SSDNow V+ 100 64GB SSD Samsung 5.25" BD-ROM/DVDRW Drive |
| Accessories | Corsair Link |
| CPU Cooler | SilverStone NT07-1156 with Cooler Master ThermalFusion 400 |
| Power Supply | SilverStone SFX ST45F 450W |
Each case is tested with just the Core i3's integrated graphics as well as with a discrete graphics card. The system is powered on and left idle for fifteen minutes, the thermal and acoustic results recorded, and then stressed by running four threads in Prime95 (in-place large FFTs) on the CPU, and OC Scanner (maximum load) is run when the dedicated GPU is installed. At the end of fiteen minutes, thermal and acoustic results are recorded. If the enclosure has a fan controller, these tests are repeated for each setting. Ambient temperature is also measured after the fifteen idle minutes but before the stress test and used to calculate the final reported results.
We try to maintain an ambient testing temperature of between 22C and 24C. Non-thermal test results aren't going to be directly comparable to the finest decimal point, but should be roughly comparable and give a broader idea of how the enclosure performs.
Thank You!
Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our testbed.
- Thank you to Puget Systems for providing us with the Intel Core i3-2120.
- Thank you to Zotac for providing us with the Z68ITX-A-E motherboard and GeForce GTS 450 Eco.
- Thank you to Crucial for providing us with the Ballistix Smart Tracer memory.
- Thank you to Corsair for providing us with the Corsair Link kit.
- Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
- Thank you to CyberPower for providing us with the Samsung BD-ROM/DVD+/-RW drive.
- And thank you to SilverStone for providing us with the power supply and NT07-1156 heatsink/fan combo.
Facebook
Twitter
RSS
65 Comments
View All Comments
Grok42 - Saturday, July 28, 2012 - link
Great review. I'm really glad to see any and all reviews of mATX and mITX cases as I think they are the future of all my builds. As I said elsewhere in the posts, I would love to see any cases that don't have 5.25" bays reviewed as there are so few and no one reviews them.I think you were spot on that mATX has suplanted ATX and mITX has taken over as the board to buy if you want a small rig. USB2, USB3 and eATA along with a steady push to integrate graphics, network, sound and wireless onboard has killed any need for expansion slots. USB flash sticks and fast internet have killed the need for optical drives and therefore 5.25" bays. Finally, multi-core processors have removed the need for multiple sockets.
max347 - Sunday, July 29, 2012 - link
Great cable managementCosmoGeek - Tuesday, August 7, 2012 - link
To Improve airflow, I would like to remove the HDD/SSD cage. However, I want to keep the 5.25 drive bay. Are these two rivited together? Is it all bent from one piece of metal? are they welded together? If the cage is removed, does the 5.25 drive bay enclosure still have sufficient support? If the cage were removed, could it be put back in later?I don't mind drilling out rivits, using a nibbler, or sawing, but my ability to do metal work is limited. I would appreciate any opinions on this from people that actuall have one of these cases. Thanks.
Cynold - Monday, August 13, 2012 - link
Maybe my mod could give you idea on how to improve the airflow. I used a corsair H60 to cool my processor to take away the heat from a very confined CPU area on the board. I did mod the DVD drive bay as a mounting pad for the H60 radiator. I drilled holes on the drive bay plate for the fan to draw air from the intake fans below (I added one on the right side facing the HDDs) . I drilled another 120mm hole on top of the case cover to exhaust the hot air. You might wanna check these link of my system. I hope this would help you.http://s1265.photobucket.com/albums/jj506/Cynold/
Cynold - Monday, August 13, 2012 - link
Thde 5.25 drive bay is supported by the HDD/SSD Cage and also it hangs on the brace at the same time. It is riveted on the HDD cage and screwed on the braces on the upper part. You can remove and put it back together using rivets/screwsCynold - Friday, August 10, 2012 - link
http://i1265.photobucket.com/albums/jj506/Cynold/4...c-bi - Thursday, August 16, 2012 - link
nice mod Cynold !!I searching a way to put a H2O 620 inside :)
Did you put the H60 rad in place of the optical drive ?
MaromG - Wednesday, September 3, 2014 - link
Hi! Could I install 3 HDDs inside?I only want to install 3.5 inch drives.
Can I use the default 2x3.5 inch bays and instead of the CD-ROM drive, install a 3.5 inch HDD using an adapter? It's a crucial point for me in deciding if I want to buy this product of not.
Thanks!
Silenzio - Friday, December 14, 2012 - link
"Whatever air that does get through seems like it may also be slamming up against the drive cage, at least if the abnormally high temperatures on the SSD during our GeForce GTX 560 Ti test are any indication."An additional cooler can be attached at the back of the drive cage making a fair air flow performance. Congratulations, dear Anandtech. This is the best miniITX case considering price/performance ratio and you failed to make a reasonable review of it because of this tiny - little issue...
nakabaka - Tuesday, July 16, 2013 - link
I know this is an old link, but I've been looking for a good mini-ITX case for a decent enough build. Witht he new 65W quad-core i7's out these days, think that would fit with say, a low-profile nVidia 640? Also I am planning to use one of those mini-ITX boards with the mSATA feature to reduce cable clutter.