BitFenix Shinobi XL Case Review: Something is Lost in the Process
by Dustin Sklavos on June 26, 2012 2:40 AM EST- Posted in
- bitfenix
- Cases/Cooling/PSUs
Testing Methodology
For testing Micro-ATX and full ATX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise.
| ATX Test Configuration | |
| CPU |
Intel Core i7-2700K (95W TDP, tested at stock speed and overclocked to 4.3GHz @ 1.38V) |
| Motherboard | Gigabyte GA-Z68MX-UD2H-B3 |
| Graphics Card |
ASUS GeForce GTX 560 Ti DCII TOP (tested at stock speed and overclocked to 1GHz/overvolted to 1.13V) |
| Memory | 2x2GB Crucial Ballistix Smart Tracer DDR3-1600 |
| Drives |
Kingston SSDNow V+ 100 64GB SSD Samsung 5.25" BD-ROM/DVDRW Drive |
| Accessories | Corsair Link |
| CPU Cooler | Cooler Master Hyper 212 Evo with Cooler Master ThermalFusion 400 |
| Power Supply | SilverStone Strider Plus 750W 80 Plus Silver |
Each case is tested in a stock configuration and an overclocked configuration that generates substantially more heat (and thus may produce more noise). The system is powered on and left idle for fifteen minutes, the thermal and acoustic results recorded, and then stressed by running seven threads in Prime95 (in-place large FFTs) on the CPU and OC Scanner (maximum load) on the GPU. At the end of fiteen minutes, thermal and acoustic results are recorded. This is done for the stock settings and for the overclock, and if the enclosure has a fan controller, these tests are repeated for each setting. Ambient temperature is also measured after the fifteen idle minutes but before the stress test and used to calculate the final reported results.
Thank You!
Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our testbed.
- Thank you to Puget Systems for providing us with the Intel Core i7-2700K.
- Thank you to Gigabyte for providing us with the GA-Z68MX-UD2H-B3 motherboard.
- Thank you to Crucial for providing us with the Ballistix Smart Tracer memory.
- Thank you to Corsair for providing us with the Corsair Link kit.
- Thank you to Cooler Master for providing us with the Hyper 212 Evo heatsink and fan unit.
- Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
- Thank you to CyberPower for providing us with the Samsung BD-ROM/DVD+/-RW drive.
- And thank you to SilverStone for providing us with the power supply.
Facebook
Twitter
RSS
29 Comments
View All Comments
Dustin Sklavos - Tuesday, June 26, 2012 - link
I've thought about it a few times. It's just a matter of one of the case manufacturers being crazy enough to let me come up with something. ;)romany8806 - Tuesday, June 26, 2012 - link
Hey Dustin, I enjoy your reviews more and read them more thoroughly than any others on Anandtech, despite not currently being in the market for anything you've covered.I don't suppose you have a CM690-II in your review backlog do you? I'd love to know how my case compares with those that have gone through your new test suite. If you have any anecdotal experience to share I'd be happy with that.
Dustin Sklavos - Tuesday, June 26, 2012 - link
I wish I did, but for some odd reason CoolerMaster stuff can be a bit hard to come by around here and I don't have any business requesting new kit until I've cleared out my (massive) backlog.So unfortunately no anecdotal experience, but just from looking at it I'd expect it to perform comparably to Antec's 1100, albeit probably a bit louder.
I sincerely appreciate the kind words, though. The internet breeds negativity, so it's always nice when someone chooses to put something positive out there. :)
Darkhynde - Wednesday, June 27, 2012 - link
I have to agree with his high opinion of your reviews. It saddens me to hear that the Cooler Master stuff is hard to come by as I am in the early stages of researching parts fro a new build I want to by myself for my birthday in about two months and had my eyes on the Cooler Master HAF XM. My current case is an OLD OLD OLD Thermaltake Kandalf circa 2003 that has served me well through my last two or three builds since then.Out of curiosity, just what do you consider massive when you mention this massive backlog of yours? Can We get a ballpark figure of how many cases are in your backlog?
One other question. What do you do with the cases once they are reviewed and the data recorded for future use. Do you have a room stock piled with cases or do you ship them back to the vendor that supplied them?
Dustin Sklavos - Wednesday, June 27, 2012 - link
Right now my backlog is about six cases deep, so basically about two months worth of reviews. Also keep in mind that as new cases are released, they get moved to the front of the line, so unfortunately when something is sitting at the back...it tends to sit at the back for a long time, potentially indefinitely. I do my best to keep up on my workload, though, and maintain contact with the vendors.And also keep in mind that, as you've seen, cases aren't the only thing I handle around here. They keep me busy. :)
JarredWalton - Wednesday, June 27, 2012 - link
Silence, slave! Back to work! [Cracks whip]Dustin Sklavos - Wednesday, June 27, 2012 - link
Yes sir! Right away sir!xaviergzz - Thursday, June 28, 2012 - link
"as the case is capable of supporting a cumulative 1080x120mm of radiators"what does that mean???
1080x120mm...1080mm X 120mm ...3 three foot long rad???
Galcobar - Thursday, June 28, 2012 - link
The key phrase is "cumulative."Dustin's not explicit about the location of the radiators -- as far as I can read -- but if fan mounts = radiator mounts, then three 120 mm x 120 mm across the top, three across the front, two on the bottom and one at the back.
120 x 9 = 1080 mm. So nine radiators, 120 mm wide, lined up would produce a 3.5-foot-long radiator.