Lian Li's PC-90: The Hammer Strikes Hard
by Dustin Sklavos on February 21, 2012 12:00 AM EST- Posted in
- Cases/Cooling/PSUs
- mid-tower
- Lian Li
Noise and Thermal Testing, Stock
While I didn't have high hopes for the Lian Li PC-90's acoustic performance due to the lack of allowances made for noise dampening, I was fairly optimistic about how well the pair of 140mm intake fans would handle thermals. As it turned out, that optimism was well justified.
It's important to understand what Lian Li is achieving in the PC-90 compared to the other enclosures we've tested. Only the Cosmos II is really able to hang with it, and that enclosure is three times as heavy, $100 more expensive, uses more and larger fans, and has a compartmentalized internal design.
These things in mind, the Cosmos II is admittedly also quieter. These stock settings don't produce a whole lot of stress, though, and our enthusiast-class enclosures here don't have much of a problem keeping pace with each other acoustically under full load.
Facebook
Twitter
RSS
54 Comments
View All Comments
jjj - Tuesday, February 21, 2012 - link
too bad you aren't actually testing it with at least 2 GPUsjjj - Tuesday, February 21, 2012 - link
lol got to add some more because this review just bugs me.Sure you got your standard testing for the sake of consistency but why just stick to it when it's not appropriate for the product? With 2 sockets and/or more than one GPU you don't only have more heat but the location of the hotspots changes and that does make a difference.Ofc you also got a very different scenario for SB-E where if you push the air back from the CPU you got some RAM in the way and you don't get any air over the VRM and that's far from ideal.
Sabresiberian - Tuesday, February 21, 2012 - link
I agree here, a 10-slot case should be tested with an extended ATX mainboard and at least 2 graphics cards.Better yet, slam one of those EVGA dual-CPU bad boys in and load it up with all the GPU it can handle. If I were buying this case, it would be for that kind of setup. (Probably not dual CPU, but definitely 3 graphics cards. Overclocked CPU.) How well does everything fit, and does it stay cool in that king of setup?
I don't understand why adding pieces of plastic to support heavy graphics cards means there is too much there. Now, if they throw in a bunch of odd-looking things and don't explain what they are for, I'd sure gripe about a poor manual, but not that they supplied extra parts I didn't happen to need.
Nice article really, just would like to have seen a more stressful test.
;)
1ceTr0n - Tuesday, February 21, 2012 - link
Lian Li makes ANOTHER boring, ugly ass case and claims it to be "UNIQUE" and "DIFFERENT".Lian Li hasn't made a single case that looked halfway decent IMO since the PC-68 back late 2001. The one and only Lian Li i've ever owned.
alufan - Tuesday, February 21, 2012 - link
rubbish i got a A70 a while back and its perfect tbh choice of top or bottom psu mount, up to 10 HDs all with fan cooling built inspace and support for the largest GPU cards available and it looks so simple and fuss free and minimalist, it also has factory made top panel with rad and fan mounts built in, look back in the DNA of silverstone et al and Lian Lis ideas will all be looking back at youCloudFire - Tuesday, February 21, 2012 - link
Agreed, Lian Li makes horrible cases. There are a few exceptions but like this one, the majority of them are horrid. Money can be spent way better elsewhere. Seriously, look at the wiring done in the assembled case. No thank you. The only thing I give Lian Li is their finesse when it comes to minimalist design and elegance; case design/layout is terrible.aznofazns - Tuesday, February 21, 2012 - link
And what do you consider to be an aesthetically pleasing case? Antec 900? BARF932?Take a look at the PC-P80, PC-V2120X, and basically all of the mini-ITX/micro-ATX cases they've put out in the past 5 years. If you think those are "boring, ugly ass" cases then you must be 12 years old.
MilwaukeeMike - Tuesday, February 21, 2012 - link
BARF932... I laughed. Gonna use that if you don't mind.Yes, it's aesthetically pleasing... so are the other cases you linked. But why are the prices so high? So I can feel good making pretentious statements about being 'minimalist'? A high price for this case, and the ones you linked ($309, $469 on newegg), without knowing where my money is gonig leads me to think it's a marketing stunt and i'm paying for the priviledge of owning a Lian Li case.
Thanks, but i'll pass.
tecknurd - Tuesday, February 21, 2012 - link
I have a Lian Li case and it is probably model PC-68, but I do not remember. Besides that, Lian Li case does make plain cases, but Lian Li puts the work on the DIY for making their case their own unique case. Depending on the model, can add extras to Lian Li cases.I will own another Lian Li case because they are easy to build a computer compared to other brands. Lian Li has tight tolerances, so drive bays and expansions are with in spec. Do not have to use a rubber headed hammer to pound the drives in place or a screw driver to leverage the expansion slots in place while screwing them down. The motherboard tray from Lian Li moves out smoothly compared to their competitors.
Dustin Sklavos - Tuesday, February 21, 2012 - link
Respectfully disagree with your point that Lian Li cases are easy to build compared to other brands. The Lian Li cases I've tested have consistently been the most time-consuming and frustrating ones to build in. The PC-90 was the least offensive that way.If you want something well made and easy to build in, Corsair remains for me the gold standard for ease of assembly.