Conclusion: Too Much in Every Way

I've spoken with a couple of boutiques about Sandy Bridge-E and the general consensus is a feeling of being underwhelmed. Gulftown this isn't; when Gulftown came out there was a very clear reason to go for it, but Sandy Bridge-E has a harder time making a case for itself when good old fashioned 95W Sandy Bridge has been getting the job done and done well for almost a year now. It's also clear that Sandy Bridge never really suffered in multi-GPU rigs from low bandwidth as a result of splitting the PCI Express 2.0 x16 lanes. I even had one boutique cancel on sending me a Sandy Bridge-E rig in favor of one with an i7-2700K, and that one's due in house soon. I don't blame them.

The fact is, a hex-core processor is overkill for gaming. The system we have on hand from Puget Systems is clearly able to do far more, and would probably rule the school at some heavy duty tasks, but video editors are likely going to want a RAIDed storage system and potentially a Quadro or FireGL GPU, and that takes the Deluge, at least in this configuration, out of contention. Bottom line: the Deluge L2, based on Sandy Bridge-E, is grossly overpriced and the final performance fails to impress. That's before we even take into account the fixed voltage overclock that causes it to put off an uncomfortable amount of heat. It's a beautiful build with a beautiful liquid-cooling system, but I have a very hard time justifying its existence.

Puget Systems does offer a Deluge A2 based on mainstream Sandy Bridge, but you sacrifice the fancy custom liquid-cooling that tags the video cards in favor of a single closed loop CPU cooler: more than a little disappointing. On the flipside, though, the stock Deluge A2 starts $2,000 under the L2, and when you configure it into a fairly comparable build, it winds up being nearly $3,000 less. That's not an insignificant difference. You lose the multi-threaded performance that benefits from having six cores, but it's not like any gamers have been crying that a 4GHz+ i7-2600K isn't enough.

Unfortunately, as we noted in our launch article, we think Sandy Bridge-E is more or less a bust for the majority of enthusiasts.  If you need the performance a hex-core CPU can offer, there's a good chance you're already running Gulftown anyway, in which case SNB-E doesn't offer a huge upgrade. There are also several areas where the platform as a whole feels rushed (e.g. NVIDIA's Surround Gaming not working at launch, the chipset lacking native support for USB 3.0, and only a coulple native SATA 6.0Gbps ports). As such, the Puget Deluge L2 winds up being a "more money than sense" kind of investment. While I would happily continue to recommend Puget Systems as a boutique and the build quality here is stellar, this Deluge is so far beyond the pale and so excessive in its configuration that I can't in good conscience recommend it.

Build, Heat, and Power Consumption
Comments Locked

72 Comments

View All Comments

  • tiro_uspsss - Thursday, November 24, 2011 - link

    "..and the wiring and liquid-cooling routing are top notch.."

    you've got to be joking right? its crap. very crap. super-duper crap given the cost of the system.

    seriously, on what the heck did you base that statement??
  • LordanSS - Thursday, November 24, 2011 - link

    My biggest concern... is something I have read about, regarding Koolance's products.

    From what I can gather, they make pretty decent copper water blocks. The issue is that their water blocks are made out of copper, the radiators are aluminum.

    Different metals... same loop... good idea? =/
  • Snotling - Thursday, November 24, 2011 - link

    the aluminum-copper thing would maybe become an issue if Such supercharged rigs lasted more than 5 years.

    sure you'll get a bit more oxidation and some of your conduits may get narrower over time but you'll still get decent cooling.
  • vol7ron - Thursday, November 24, 2011 - link

    I think the thermals would come into play too. Heat is still dissipated into the air and along the length of the material. The surface area of the material and amount of heat generated could be enough to handle the cooling required; of course, in lava everything burns.
  • Beenthere - Thursday, November 24, 2011 - link

    I expect that water leaks will destroy the PC hardware long before five years so the electrolysis and corrosion issues from the different metals is a moot point as the system will be scraped long before then. This is a really bad PC system even at $2K.
  • jonup - Thursday, November 24, 2011 - link

    You can't help yourself mentioning the leaks, can you? :)

    Everyone,
    Water coolers leak! Just ask Beenthere.
  • Beenthere - Thursday, November 24, 2011 - link

    Reality bites when you can't deal with it. ;)
  • Death666Angel - Friday, November 25, 2011 - link

    Just toss some anti-corrosive in there and it should be good enough. Standard operating procedure when you build your own water cooling rig.
  • Beenthere - Friday, November 25, 2011 - link

    Maybe throw some automotive stop leak in too, while you're at it? ;)
  • hotsacoman - Thursday, November 24, 2011 - link

    Just donate the system to me and i'll support you lol

Log in

Don't have an account? Sign up now