SAP S&D Benchmark

The SAP SD (sales and distribution, 2-tier internet configuration) benchmark is an interesting benchmark as it is a real world client-server application. We looked at SAP's benchmark database for these results. The results below all run on Windows 2003 Enterprise Edition and MS SQL Server 2005 database (both 64-bit). Every 2-tier Sales & Distribution benchmark was performed with SAP's latest ERP 6 enhancement package 4. These results are NOT comparable with any benchmark performed before 2009. The new 2009 version of the benchmark produces scores that are 25% lower. We analyzed the SAP Benchmark in-depth in one of our earlier articles. The profile of the benchmark has remained the same:

  • Very parallel resulting in excellent scaling
  • Low to medium IPC, mostly due to "branchy" code
  • Somewhat limited by memory bandwidth
  • Likes large caches (memory latency!)
  • Very sensitive to sync ("cache coherency") latency

SAP Sales & Distribution 2 Tier benchmark

There is no doubt here: the Westmere-EX Xeon delivers with 30% higher performance than the previous x86 quad CPU record. The 40-core, 80-thread quad Xeon server can not beat the 32-core, 128-thread IBM Power 750, the RISC champion; however, the high-end IBM servers start at $100,000, two to three times more than a comparable Xeon system.

The 30% extra performance that the new 32 nm Xeon delivers over its predecessor also increases the gap with AMD. The best quad Xeon now offers 50% more performance than the best quad Opteron. The ERP market is a market where RAS, scalability, and performance are the top priorities and hardware pricing is only a secondary thought. There is little doubt in our mind that Intel will continue to dominate the x86 ERP server market.

Test Servers and Benchmark Setup Virtual Performance on vSphere 4
Comments Locked

62 Comments

View All Comments

  • L. - Thursday, June 2, 2011 - link

    Err... no it's not the same price.
    Besides, "a lot worse on benchmarks" is a huge pile of shit, if that was the case, why would Cray and others take Opteron for SC ?
    Why would anyone, in fact, go out of their habits to buy a chip from the underdog ?

    Believe me, even if you see a lot favoring Intel, there's a lot favoring AMD that's less shown but there regardless..

    As I said, same perf/watt on the anand benchmarks for two chips that are a die shrink away from each other... this is ludicrous.
  • Casper42 - Thursday, May 19, 2011 - link

    I had heard previously that 32GB DIMM Support (Quad Rank) was actually coming from Westmere CPUs themselves as opposed to Mobo or Chipset.

    The part of the review where you talk a little about the Hardware Intel sent over makes it seem like the Server is the part responsible for the 32GB DIMM support.

    Perhaps you could research and clarify a little?
  • Michael REMY - Friday, May 20, 2011 - link

    cinebench benchmark is missing so much...

    My lord anandtech...?
    why didn't you test cinebench on this god machine ?
    why not ?

    why do you thinh this kind of machine is preferend to server/network instead 3D application ?

    even a single cinebench (which is a x64 portable application in windows ) need less 15 minutes to download, unpack, run,re-rerun the test...

    why no 3d benchmark in this test. i 'm so desapointed...

    :-(
  • JohanAnandtech - Saturday, May 21, 2011 - link

    I'll run that for you, but Cinebench is limited to 64 threads. Other suggestions you would like to see?
  • Veteran_69 - Friday, May 20, 2011 - link

    Looking at the power consumption and results. It is clear to me that AMD is better in the Perf/Watt performance. Even with an outdated platform (Why no tests with magny-cours again?)
    they manage to perform better with the same currentdraw.
  • JohanAnandtech - Saturday, May 21, 2011 - link

    "(Why no tests with magny-cours again?)"

    What do you mean by this? The AMD Opteron 6174 is one of the best Magny-cours available.
  • Veteran_69 - Friday, May 20, 2011 - link

    Since my previous comment was deleted for whateve reason. I'll rephrase.

    Why arent there any perf/wat figures? If you look at the data it is Clear that an old AMD platform offers superior Perf/Watt. I also noticed any tests with Magny-cours as a competition is missing?
  • silverblue - Friday, May 20, 2011 - link

    The Opteron 6174 and 6176 are Magny-Cours processors, so they were indeed tested. I believe the choice in using the 6174 for the majority of the review would be down to the 6176's higher TDP as discussed at the following link:

    http://www.anandtech.com/show/2978/amd-s-12-core-m...
  • behold4r - Friday, May 20, 2011 - link

    I have very much enjoyed reading this article as well as the previous one about the 4p systems of intel which are in fact very interesting i must say, because benchmarks about such systems are very rare to find on the net.

    I would only like to ask anandtech.com if it is possible to see any rendering benchmarks on such a system. I am using some 3D software and i would very much like to see how the AMD system with the 48 cores is doing when rendering (with mental ray and vray preferably).

    I focus on the AMD server system because it really is a very good price per performance example whereas Intel is indeed ahead performance wise, but the prices for an Intel 4P system are astronomical to say the least. I personally believe that very few companies need such a thing, while most of them can do well with an AMD system.

    And since you are talking about virtualization, if a company needs more power, just buy another 4P AMD system, the overall result will be a faster system (by far) than a single Intel one, while having the price of a single Intel server! (3K+ for a single intel cpu chip is just outrageous, intel charges like there is noone else on this planet with an equivalent product, at least for the x86 market). Though two AMD systems will use a little more power than a single Intel one (~1150W for 2 AMD servers instead of ~900W for a single Intel based on the info of this article, which is not that much ahead if you think of the performance you gain).

    Then again there are the infrastructure costs (more 10 gig ports for the extra system, extra UPS load thus more UPS power to handle the extra system, extra space in the rack, and of course extra cooling for the 2nd system). Which I think these issues are the real deal and hence will make the final decision.

    Anyway, that's all i wanted to say. Again i only wanted to ask for some rendering benches, if it such a hustle than at least a mere cinebench 11.5 would be fine.

    Thanks
  • Kiijibari - Saturday, May 21, 2011 - link

    Where is AES in the CPU-Z screenshot, is it not supported ?
    Would be very strange for a server CPU, wouldn't it ?

Log in

Don't have an account? Sign up now