OCZ Vertex 3 Pro Preview: The First SF-2500 SSD
by Anand Lal Shimpi on February 17, 2011 3:01 AM ESTFinal Words
I didn't really believe that SandForce could pull it off when I first heard how fast the SF-2000 line would be. Even after CES, I didn't really believe the drives would be this good in real world use cases. Consider me pleasantly surprised.
When connected to a good 6Gbps controller, the Vertex 3 Pro is significantly faster than anything else on the market today. Obviously the V3P itself is an unreleased drive so things could change as its competitors show up as well, but the bar has been set very high. The Vertex 3 Pro is the first SSD to really put 6Gbps SATA to good use. In fact I'd say its the first drive that really needs a 6Gbps interface. Whenever you Sandy Bridge owners get replacement motherboards, this may be the SSD you'll want to pair with them.
Even writing incompressible data the Vertex 3 Pro is faster than current SandForce drives running full tilt. The performance gains we see here are generational, not a simple evolutionary improvement. SandForce has also successfully addressed the limited shortcomings of the original SF-1200 controller with regards to writing incompressible data.
Clearly performance isn't going to be a problem with this generation. The real unknowns are how well will the Vertex 3 (non-Pro) perform and how reliable will these drives be? Intel is still king of the hill when it comes to drive reliability, however OCZ has been investing heavily in improving its manufacturing. I suspect that this next SSD war will be fought both along performance and reliability lines. Unfortunately for us, the latter is very difficult to quantify without a significant sample of drives.
With new controllers from SandForce, Intel and Marvell due out this year we're going to see SSD performance go through the roof and SSD prices to continue to fall. We're still a couple months away from knowing exactly what to buy, but if you've been putting off that move to an SSD - 2011 may be the year to finally pull the trigger.
Facebook
Twitter
RSS
144 Comments
View All Comments
slickr - Thursday, February 17, 2011 - link
Now this is what I'm talking about about reviews/previews. Tons of benchmarks at various settings and loads. You can really make a difference now and see how the drives perform.I would also like a good old fashion test with Starcraft 2, how long it takes to load a 5-6mb custom map.
I would also like another test where you select 30 files and open them at the same time and see how much time it takes to open all. I'm talking about selecting few 3-5mb images, few MP4 360p videos, few H.264 720p videos, dozen office documents from 500kb up to 3mb, several applications like GPU-z, skype, Live, Xfire, firefox etc... and opening few highly compressed script files.
MamiyaOtaru - Thursday, February 17, 2011 - link
smaller process, less reliability, and higher price? We've been waiting for years fr prices to become reasonable next to magnetic storage but there's been barely a drop at all, and the drops that do come (smaller processes, supposedly) reduce reliability. At this point I don't see myself ever getting one for my desktop.Laptops sure, hard drives die there all the time, and I don't use them as my primary machine. Smaller storage requirements + hard drives dying far more often in laptops makes SSDs the better choice for me there.
Chloiber - Thursday, February 17, 2011 - link
I do generally agree. I don't want faster drives, I want cheaper drives. They are already very fast. Of course, faster is always better but at the moment I prefer low price and reliabilty over speed.seapeople - Friday, February 18, 2011 - link
Seriously... I don't need a brand new controller that might or might not be reliable and is so fast that it would still seem fast if I taped myself using the computer and replayed it in slow motion. What I want is an x25m-like drive at 160 GB for under $200. Still extremely fast, legendary (for SSD's) reliability, and make it affordable.The reason I don't buy Ferrari's right now is not because I don't think they're fast enough, it's because they COST too much.
RU482 - Thursday, February 17, 2011 - link
this might be the problem with OCZ. They are an SSD marketing company with a manufacturing divisionTimK - Thursday, February 17, 2011 - link
Damn, Anand, so this is what an engineering degree will get you, not to mention some heavy duty skill at writing. Comprehensive and comprehensible. Thanks very much. At your recommendation I bought an early Vertex 30GB SSD for my unibody MacBook. From time to time I take it out, thinking to have everything in one place on a bigger drive, but I just can't let go of the speed. It's still working great.dlang1234 - Thursday, February 17, 2011 - link
The Samsung 470 seems to be in a lot of the benchmarks but not all, and seems to do well in every one that it is listed in.I can't seem to find a review of it here, but would be interested in it possibly.
markjx1 - Thursday, February 17, 2011 - link
No mention of the fact this thing was originally slated with the SF-2000 controller, which proved to be plagued with problems in the lab and the dirty little secret no vendor would discuss at CES which was why no one had anything SF-2000 based up and running. And now OCZ had to resort to slapping Sandforce's enterprise class SF-2500 controller on it.Great except its going to be hella expensive and not cost competitive with the Crucial C400 unless OCZ bleeds margin, and given they took a $25 million bank loan recently, well let's just say OCZ isn't a company I'd rely on to fulfill a warranty replacement a couple years down the road when your drive dies.
Lastly, notice the "hardware isn't final" disclaimers all over the article. This is nothing more than OCZ trying to get some buzz, and have painted themselves into a corner now if they go switching back to the SF-2000 since they've already set expectations high.
jwilliams4200 - Thursday, February 17, 2011 - link
I thought the article was fairly well done. The only problem I have with it is a passing mention to the SSD being unusuable on a Macbook Pro, and yet not a single benchmark shows any problems with the SSD. It seems the benchmark suite Anand is using needs to have some more components added. Perhaps a latency test?Anand Lal Shimpi - Sunday, February 20, 2011 - link
Check back on the site by the end of the week ;)Take care,
Anand