3dsmax 9 - SPECapc 3dsmax CPU Rendering Test

Today's desktop processors are more than fast enough to do professional level 3D rendering at home. To look at performance under 3dsmax we ran the SPECapc 3dsmax 8 benchmark (only the CPU rendering tests) under 3dsmax 9 SP1. The results reported are the rendering composite scores.

3dsmax r9 - SPECapc 3dsmax 8 CPU Test

This is the closest we've ever seen the Phenom II X6 to Intel's Core i7 series. Here the 860 is a bit faster but it's also more expensive, the 1100T is a good fit here. The Athlon II X3 455 is 16% faster than its closest competitor, while the Phenom II X2 565 BE falls behind its target. This is very similar to what we reported a couple of months ago, the Athlon II X3 is a great value while the Phenom II X2 makes sense only if you can unlock at least one of its cores.

Cinebench R10

Created by the Cinema 4D folks we have Cinebench, a popular 3D rendering benchmark that gives us both single and multi-threaded 3D rendering results.

Cinebench R10 - Single Threaded

Single threaded performance is an advantage the i5/i7s have over the Phenom II X6s, however thanks to the high turbo core speed of the 1100T the gap isn't huge. The Athlon II X3 trails the G6950 here as its core advantage is useless in a single threaded application.

Cinebench R10 - Multithreaded

Turn up the threads and there's no beating the Phenom II X6 and Athlon II X3, they both do much better than their intended competition.

I've started running Cinebench 11.5 in preparation for an update to Bench, some of the initial results are below:

Cinebench 11.5 CPU Test

The Phenom II X6 1100T and Athlon II X3 do very well once again.

SYSMark 2007 & Photoshop Performance Video Encoding & Data Archiving Performance
Comments Locked

65 Comments

View All Comments

  • Finally - Tuesday, December 7, 2010 - link

    one thing is missing.
    I'm much less interested in overclocking than I am interested in undervolting.
    3 Weeks ago I bought two Phenom II X2 555 BE C3s for my girlfriend's new PC and mine - and guess what? Both unlocked to quad-cores easily. I was even able to lower the CPU voltage from 1.251V to a mere 1.141V. As a power consumption-meter is on its way to me, I will be able to report power saving numbers, if anyone is interested.

    All this 4-core-goodness I got for a mere 75€ a pop.
    If that's not great performance for an unbeatable price I don't know what is...
  • chrnochime - Wednesday, December 8, 2010 - link

    And like was mentioned in the article it's not guaranteed that whoever buys the 555/565 BE would be able to unlock the other two cores and run them just fine without instability.

    When it's a gamble and not 100% success rate, people who value their time and not wanting to return CPUs and getting another to test tend to either go down to the cheaper x3 or pay a bit more for the i3.
  • ajp_anton - Tuesday, December 7, 2010 - link

    I noticed you're using the x264 pass1 test for load power consumption.
    Is this really a good choise? All cores aren't maxed out in this test. This is obvious when knowing what x264 is actually doing in pass1 versus pass2, and comparing the speeds confirm this.
    In pass2, all Phenom II's (x2, x4, x6) have exactly the same speed per core per GHz.
    In pass1, the speed bumps are far from the nice linear scaling in pass2. The x6 is only twice (2.13x) as fast as the x2, so almost two cores are idle.
  • Anand Lal Shimpi - Tuesday, December 7, 2010 - link

    You'll see this change in the next month when we revamp our Bench suite :)

    Take care,
    Anand
  • nitrousoxide - Tuesday, December 7, 2010 - link

    Yeah, expecting that. I don't quite understand why putting the stupid sysmark on the test...it just can't tell any difference between processors with different performance :)
  • iwodo - Tuesday, December 7, 2010 - link

    There are rumours floating around that Intel is gonna make BIG price cut soon for holiday season due to lower then expected demand, clearing stocks for Sandy Bridge, as well as more people buying iPad then PCs.

    SandyBridge will be a top to bottom chip, leaving Current Nehalem for Servers. ( Which is doing VERY well in that area )

    Some of the performance data are already leaked, the only things that is left is on the GPU side as well as Official benchmarks.
  • yuriylsh - Tuesday, December 7, 2010 - link

    just got a notification from Micro Center about $80 instant savings on i7-950, which means $200 for 3GHz Core i7 - not a bad deal. Is it starting?
  • RyuDeshi - Wednesday, December 8, 2010 - link

    MicroCenter has been selling the 950 for $199 for a long time now. It has been on SlickDeals front page many times.. They just do that to get traffic to their store, then try to sell you everything else you don't need.
  • jaydee - Tuesday, December 7, 2010 - link

    The Phenom II X2 565 is 18% (idle) and 23% (load) more efficient than the Phenom II X2 555?
  • MrSpadge - Tuesday, December 7, 2010 - link

    The board has changed to a much more efficient one. It's approximately a constant offset between both configurations, as evidenced by the differences in idle numbers.

    MrS

Log in

Don't have an account? Sign up now