Dawn of War II

Dawn of War II is the other game that saw some significant driver improvements under Crossfire mode. As a result performance is up for all of our 5000 series cards in CF mode, and it gets the 5000 series out of the CF disadvantage that we saw with the 5800 series launch.

The CF performance improvement proves to be somewhat counterproductive here though, as the 5850CF with these new drivers now slightly outperforms the 5970, leaving the 5970 back by around 2%. And yes, we know that the 5850CF is outperforming the 5870CF. That's what we really get - there are driver bugs to solve methinks.

Meanwhile overclocking the 5970 is good for another 9%, and the stock 5970 is 37% faster than the GTX 295.

HAWX Resident Evil 5
Comments Locked

114 Comments

View All Comments

  • Lennie - Wednesday, November 18, 2009 - link

    If so, then one could suspect it's the same issue with games due to VRMs of this particular card getting heated up and throttling the card. Perhaps not enough contact between VRM and HSF or a complete lack of TIM on VRM by accident. I would have reseated the HSF if I owned that card.
  • Rajinder Gill - Wednesday, November 18, 2009 - link

    I suspect it is VRM/heat related. The 'biggest' slaves Volterra currently supply are rated at 45 amps each afaik. Assuming ATI used the 45 amp slaves (which they must have), you've got around 135 amps on tap. Do the math for OCP or any related throttling effects kicking in. Essentially, 1.10VGPU puts you at 150w per GPU before things either shut down or need to be throttled (depends on how it's implemented as it nears peak). Any which way you look at it, ATI have used a high end VRM solution, but 4 slaves per GPU would have given a bit more leeway on some cards. I wonder what the variance is in terms of leakage from card to card as well. Seeing as there's not much current overhead in the VRM (or at least there does not appear to be), a small change in leakage would be enough to stop some cards from doing too much in terms of overclocking on the stock cooler.

    later
    Raja
  • Silverforce11 - Wednesday, November 18, 2009 - link

    It could be your PSU, some "single rail" PSU arent in fact using a single rail but several rails with a max limit on AMPs. Its deceptive.

    Guru3D uses 1200W PSU and manages 900 core, which is typically what a 5870 OC to on air. Essentially the chips are higher quality cypress, maybe you should retry it again with a different PSU then conclusions can be drawn.
  • Bolas - Wednesday, November 18, 2009 - link

    Yep, there is certainly a market for 5970CF. Can't wait!
  • tajmahal - Wednesday, November 18, 2009 - link

    Big deal, another paper launch where only a tiny handful of people will be able to get one.
  • LedHed - Tuesday, November 24, 2009 - link

    My question is why do the OC the 5970 but not the 295...

    We all know the 295 is memory bottlenecked at resolutions at/over 2560x1600

    But considering the GTX 295 is down below $450 and no one can find these cards in stock with a god awful price of $600 ($100 more than 295 at launch).
  • mschira - Wednesday, November 18, 2009 - link

    newegg list 5 different models, they come and go quite fast.
    I managed to get one of them in my shopping card.
    All it would need now is pay. (which I don't want to...).
    So yea they are not exactly easy to get, but far from impossible.
    So not a paper launch.
    Be real, it's day two after the launch, and you CAN get them. That's not bad at all.
    M.
  • MrPickins - Wednesday, November 18, 2009 - link

    At the moment, Newegg shows two different 5970's in stock. A HIS and a Powercolor.
  • tajmahal - Wednesday, November 18, 2009 - link

    Listed, but not available. I guess newegg sold both of the ones they had available, and the 5850 and 5870 ?......... not available either.
  • Silverforce11 - Wednesday, November 18, 2009 - link

    Plenty of 5870s around at retails and etailers, what do you mean by "another paper launch"?

Log in

Don't have an account? Sign up now