The Test

CPU Intel Core i7 965 running at 3.2GHz (Turbo & EIST Disabled)
Motherboard: Intel DX58SO (Intel X58)
Chipset: Intel X58
Chipset Drivers: Intel 9.1.1.1015 + Intel IMSM 8.9
Memory: Qimonda DDR3-1066 4 x 1GB (7-7-7-20)
Video Card: eVGA GeForce GTX 285
Video Drivers: NVIDIA ForceWare 190.38 64-bit
Desktop Resolution: 1920 x 1200
OS: Windows 7 x64

Sequential Read/Write Speed

Using the latest build of Iometer I ran a 3 minute long 2MB sequential write test over the entire span of the drive. The results reported are in average MB/s over the entire test length:

I ruined the surprise earlier, but the X25-M G2 160GB can now write at speeds of up to 100MB/s. The 80GB version doesn't get the benefit. The rest of the SSDs are approaching 2x that performance however. The poor Kingston drive is limited by its 5-channel implementation and barely manages more than 40MB/s. This will keep the Kingston SSDNow V series from cannibalizing X25-M sales, while at the same time offering a taste of what good SSDs have to offer at lower price points.

 

We're nearly tapped out on sequential read speed. The new TRIM firmware appears to drop performance a bit but not much. SATA 6Gbps will be necessary before we can see higher sequential read speeds from a single SSD.

True to Kingston's claims, the SSDNow V 40GB pulls around 170MB/s thanks to its narrower configuration. Not within arm's reach of the more expensive SSDs but still much faster than a mechanical drive.

Kingston Delivers the First Good Sub-$100 SSD (after Rebate) Random Read/Write Speed
Comments Locked

162 Comments

View All Comments

  • Pandamonium - Monday, October 26, 2009 - link

    The 2nd gen X18-M isn't available as far as I can tell. It kind of shafts us tablet and ultraportable users out of the SSD market for another round =/
  • Cavicchi - Monday, October 26, 2009 - link

    "You no longer have to boot to DOS and secure erase your SSD before installing Windows, just quick format the partition before installing Windows 7."

    I always thought the "quick format" doesn't wipe the entire drive as clean as a full/long format. Does the above mean we only need to do a quick format to wipe a drive clean to install Windows 7?

    Also, I noticed Superfetch, Prefetch, and Ready Boost are enabled in Windows 7 x64 with my X25-M G2 160GB drive installed.
  • Voo - Monday, October 26, 2009 - link

    Logically when a TRIM command is sent to the drive you lose all the data that was saved there.

    So, there's no difference between full/quick format or anything else as long as it triggers the TRIM command..
  • Beno - Monday, October 26, 2009 - link

    "SSDs are made up of millions of NAND flash cells. They can be written to in groups called pages (generally 4KB in size) but can only be erased in larger groups called blocks (generally 128 pages or 512KB). These stipulations are partially the source of many SSD performance issues."
    but isnt it possible to erase data in 4KB, the same way they are written?
  • krumme - Monday, October 26, 2009 - link

    Where does speed matter most?
    Getting some sense into the g2 hype
    Now you can have a job with a Dell and a hd with samsung controller without quitting the job

    Thanx Anand for always improving your site and letting us learn
    Thats whats move this boys-toy business forward


  • flynace - Monday, October 26, 2009 - link

    If you set up a software RAID-0 array within Windows 7 will it support TRIM?
    Or is TRIM not possible on any form of RAID (OS, BIOS, HW, etc.)?

    And does aliging the partitions make any difference on these drives?
  • Voo - Monday, October 26, 2009 - link

    Iirc Anand stated in some of his articles that there's no TRIM support for raid, because the controller had to forward the commands.

    But imho it sounds not like a unconquerable problem, so it's probably only a question of time.
  • flynace - Tuesday, October 27, 2009 - link

    Thanks. I assume Intel will update their drivers to support RAID TRIM eventually, but if you don't have an 'R' tybe Intel ICH, does Win7 support TRIM if you set up a software RAID array in the OS still using the MS AHCI drivers?
  • Willardjuice - Monday, October 26, 2009 - link

    Did Intel update their Windows 7 sata/raid drivers to also include TRIM support? Or do we have to use the drivers provided by Microsoft?
  • DoveOfTheSouth - Monday, October 26, 2009 - link

    Another great SSD article from Anand (thank you so much)!

    But I'm really disappointed that you have to use the Microsoft Win 7 disk driver to get TRIM. It has a huge problem.

    Based on my experience, I would normally strongly recommend that the first thing you do when installing Win 7 is replace the Microsoft driver with the latest Intel Matrix Storage Manager.

    The following link describes the problem (long periods of system non-responsiveness) you can get with the Microsoft driver and at least some PCs, and how to fix it:
    http://blogs.zdnet.com/Bott/?p=1431&page=3&...">http://blogs.zdnet.com/Bott/?p=1431&page=3&...

    I had exactly the same crippling problem on a Dell Dimension 9100 which baffled me until I replaced the Microsoft driver with IMSM - problem disappeared instantly.

    Okay it was bit of an old PC but of the 3 I have been testing with Win 7 for the last couple of months, it was the only one that used the Microsoft driver instead of IMSM (it was an XP upgrade ie OS reinstall, the others upgrades from Vista). So I don't know how widespread the problem with the Microsoft driver is, it hit my only PC that was a candidate, but I'd be pretty wary.
    Otherwise Win 7 has been great.

    So it looks like you have a choice: IMSM with no TRIM or a buggy Microsoft driver with TRIM.

Log in

Don't have an account? Sign up now