Random Read/Write Performance

Arguably much more important to any PC user than sequential read/write performance is random access performance. It's not often that you're writing large files sequentially to your disk, but you do encounter tons of small file reads/writes as you use your PC.

To measure random read/write performance I created an iometer script that peppered the drive with random requests, with an IO queue depth of 3 (to add some multitasking spice to the test). The write test was performed over an 8GB range on the drive, while the read test was performed across the whole drive. I ran the test for 3 minutes.

The three hard drives all posted scores below 1MB/s and thus aren't visible on our graph above. This is where SSDs shine and no hard drive, regardless of how many you RAID together, can come close.

The two Intel drives top the charts and maintain a huge lead. The OCZ Vertex actually beats out the more expensive (and unreleased) Summit drive with a respectable 32MB/s transfer rate here. Note that the Vertex is also faster than last year's Samsung SLC drive that everyone was selling for $1000. Even the JMicron drives do just fine here.

If we look at latency instead of transfer rate it helps put things in perspective:

Read latencies for hard drives have always been measured in several ms, but every single SSD here manages to complete random reads in less than 1ms under load.

Random write speed is where we can thin the SSD flock:

Only the Intel drives and to an extent, the OCZ Vertex, post numbers visible on this scale. Let's go to a table to see everything in greater detail:

4KB Random Write Speed  
Intel X25-E 31.7 MB/s
Intel X25-M 23.1 MB/s
JMicron JMF602B MLC 0.02 MB/s
JMicron JMF602Bx2 MLC 0.03 MB/s
OCZ Summit 0.77 MB/s
OCZ Vertex 2.41 MB/s
Samsung SLC 0.53 MB/s
Seagate Momentus 5400.6 0.81 MB/s
Western Digital Caviar SE16 1.26 MB/s
Western Digital VelociRaptor 1.63 MB/s

Every single drive other than the Intel X25-E, X25-M and OCZ's Vertex is slower than the 2.5" Seagate Momentus 5400.6 hard drive in this test. The Vertex, thanks to OCZ's tweaks, is now 48% faster than the VelociRaptor.

The Intel drives are of course architected for the type of performance needed on a desktop/notebook and thus they deliver very high random write performance.

Random write performance is merely one corner of the performance world. A drive needs good sequential read, sequential write, random read and random write performance. The fatal mistake is that most vendors ignore random write performance and simply try to post the best sequential read/write speeds; doing so simply produces a drive that's undesirable.

While the Vertex is slower than Intel's X25-M, it's also about half the price per GB. And note that the Vertex is still 48% faster than the VelociRaptor here, and multiple times faster in the other tests.

Sequential Read/Write Performance SYSMark 2007
Comments Locked

250 Comments

View All Comments

  • SunSetSupaNova - Wednesday, March 18, 2009 - link

    Just wanted to say great job Anand on a great article, it took me a while to read it from start to finish but it was well worth it!

  • FHDelux - Wednesday, March 18, 2009 - link

    That was the best review i have read in a long time. I originally bought an OCZ Core drive when they first came out. It was the worst piece of garbage i had ever used. Newegg wouldn't let me send it back and OCZ support forums told me all sorts of junk to get me to fix it but it was just a poorly designed drive. I eventually ended up getting the egg to take it back for credit and i wrote OCZ off as a company blinded by the marketing department. I currently own an Intel SSD and its wonderfull, everytime i see OCZ statements saying their drive competes with the Intel drive i would laugh and think back to the OCZ techs telling me i need to update my bios, or i need to install vista service pack 1 before it would work right.

    I am thankful that you slapped that OCZ big wig around until they made a good product. All of us out there that wasted our time and money on Pre-vertex generation drives are greatfull to you and the whole industry should be kissing your butt right now.

    One thing these companies need to learn is that marketing isn't the answer, creating solid products is. Hopefully OCZ has learned their lesson, and because of your article i will give them another chance.

    THANK YOU!
  • kelstertx - Wednesday, March 18, 2009 - link

    I didn't want to worry about eventual failure of the Flash chips of an SSD, and went with an SDRAM based Ramdrive from Acard. These drives have no latency of any kind, since they use SDRAM, and no lifespan of write cycles. I've been using mine for a couple of weeks now, and I like it a lot. I put Ubuntu on mine, and had 2G left for my small home folder. The standard HDD is my long-term storage for data files, music, etc. As SDRAM gets more affordable over time, I can add DIMMs and bump up the size.

    I know this review was about SSDs strictly, so an SDRAM drive doesn't technically fit, but it would have been interesting to see a 9010 or 9010b in there for comparison. It beat the Intel SSD in almost all the tests. http://techreport.com/articles.x/16255/1">http://techreport.com/articles.x/16255/1

  • 7Enigma - Wednesday, March 18, 2009 - link

    I've been eying these guys ever since the announced their first press release. Every time I always was drawn away by the constant need for power (4h max on battery scares the bejeezus out of me if I was to be gone on vacation during a storm), high power usage at all times, and high cost of entry (after factoring in all of the ram modules).

    I really dislike that article as well, since I think the bottlenecks were much less apparent with such a horribly slow cpu. The majority of that review's data is extremely compressed. I mean a P4, and 1 gig of memory; are you F'ing kidding me? This article was written in Jan of this year!? Why didn't they just use my old 486DX?
  • tirez321 - Wednesday, March 18, 2009 - link

    What would a drive zeroing tool do to write performance, like if you used acronis privacy expert to zero only the "free space" regularly? Would it help write performance due to the drive not having to erase pages before writing?
  • tirez321 - Wednesday, March 18, 2009 - link

    I can kinda see that it wouldn't now.
    Because there would still be states there regardless.
    But if you could inform the drive that it is deleted somehow, hmm.

  • strikeback03 - Wednesday, March 18, 2009 - link

    The subjective experiences with stuttering are more important to me than most of the test numbers. Other tests I have found of the G.Skill Titan and similar have looked pretty good, but left out mention of stuttering in use.

    Too bad, as the 80GB Intel is too small and the ~$300 for a 120GB is about the most I am willing to pay. Maybe sometime this year the OCZ Vertex or similar will get there.
  • strikeback03 - Tuesday, March 24, 2009 - link

    When I wrote that, the Newegg price for the 120GB Vertex was near $400. Now they have it for $339 with a $30 MIR. Now that's progress.
  • kamikaz1k - Wednesday, March 18, 2009 - link

    the latency times are switched...incase u wanted to kno.
    also, first post ^^ hallo!
  • GourdFreeMan - Wednesday, March 18, 2009 - link

    It seems rather premature to assume the ATA TRIM command will significantly improve the SSD experience on the desktop. If you were to use TRIM to rewrite a nonempty physical block, you do not avoid the 2ms erase penalty when more data is written to that block later on and instead simply add the wear of another erase cycle. TRIM, then, is only useful for performance purposes when an entire 512 KiB physical block is free.

    A well designed operating system would have to keep track of both the physical and logical maps of used space on an SSD, and only issue TRIM when deletion of a logical cluster coincides with the freeing of an entire physical block. Issuing TRIMs at any other time would only hurt performance. This means the OS will have significantly fewer opportunities to issue TRIMs than you assume. Moreover, after significant usage the physical blocks will become fragmented and fewer and fewer TRIMs will be able to be issued.

    TRIM works great as long as you only deal with large files, or batches of small files contiguously created and deleted with significant temporal locality. It would greatly aid SSDs in the "used" state Anand artificially creates in this article, but on a real system where months of web browsing, Windows updates and software installing/uninstalling have occurred the effect would be less striking.

    TRIM could be mated with periodic internal (not filesystem) defragmentation to mitigate these issues, but that would significantly reduce the lifespan of the SSD...

    It seems the real solution to the SSD performance problem would be to decrease the size of the physical block... ideally to 4 KiB, as that is the most common cluster size on modern filesystems. (This assumes, of course, that the erase, read and write latencies could be scaled down linearly.)

Log in

Don't have an account? Sign up now