FarCry 2 Analysis

FarCry 2 is a good looking game with a well rounded graphics engine. We use the benchmark tool and a custom demo to test with ultra high graphics options while we try to minimize CPU impact.




1680x1050    1920x1200    2560x1600


Relative performance stays very consistent from 1680x1050 to 1920x1200 but looking at 2560x1600 tells a different story. Anything with 512MB of RAM just tanks in performance at the highest resolution. CrossFire and SLI can't help these lower memory parts keep up either. Even at lower resolutions it seems like the G9x based NVIDIA hardware just can't handle FarCry 2 very well at all. This make the 4850 a much better option than the 9800 GTX+.




1680x1050    1920x1200    2560x1600


As for scaling, SLI does really well with GT200 based cards and not so well with the 9800 GTX+. CrossFire scaling is very consistent between 1680x1050 and 1920x1200. Everything drops in scaling at 2560x1600 though. We expect that this is because of the increased memory and bandwidth requirements from the higher res.




1680x1050    1920x1200    2560x1600


Performance per dollar reveals the GTX 260 and GTX 260 SLI as the only NVIDIA options with value that competes with AMD solutions below 2560x1600. At the highest resolution, because of the memory limited performance issues, the value of our 512MB ATI cards drop to near the bottom of the heap. The Radeon HD 4850 X2 2GB is consistently high in value here and remains playable across all resolutions.

The settings we chose leave the G9x based parts (even in SLI) and the Radeon HD 4850 unplayable even at 1680x1050. Radeon HD 4870 level hardware and above can achieve the highest visual quality at the lowest res we tested. Pushing up, the 512MB 4870 drops a bit too much in performance to recommend at 1920x1200. The 1GB version of the 4870 holds on to playability and leads the GTX 260 core 216. At 2560x1600, the only single GPU option that barely gets by is the GTX 285. CrossFire and SLI (as long as the cards have more than 512MB of RAM) seem to have enough under the hood to run at the highest settings and resolution.

Fallout 3 Analysis Left 4 Dead Analysis
Comments Locked

95 Comments

View All Comments

  • SiliconDoc - Wednesday, March 18, 2009 - link

    Oh, I'm sorry go to that new technolo9gy red series the 3000 series, and get that 3780... that covers that GAP the reds have that they constantly WHINE nvidia has but DOES NOT.
    Yes, go back a full gpu gen for the reds card midrange...
    GOOD GOLLY - how big have the reddies been lying? !?
    HUGE!
  • MagicPants - Monday, February 23, 2009 - link

    I know you're trying to isolate and rate only the video cards but the fact of the matter is if you spend $200 on a video card that bottlenecks a $3000 system you have made a poor choice. By your metrics integrated video would "win" a number of tests because it is more or less free.

    You should add a chart where you include the cost of the system. Also feel free to use something besides i7 965. Spending $1000 on a CPU in an article about CPU thrift seems wrong.
  • oldscotch - Monday, February 23, 2009 - link

    I'm not sure that the article was trying to demonstrate how these cards compare in a $3000.00 system, as much as it was trying to eliminate any possibility of a CPU bottleneck.
  • MagicPants - Monday, February 23, 2009 - link

    Sure if the article was about pure performance this would make sense, but in performance per dollar it's out of place.

    If you build a system for $3000 and stick a $200 gtx 260 in it and get 30 fps you've just paid $106 ($3200/30fps)per fps.

    Take that same $3000 dollar system and stick a $500 gtx 295 and assume you get 50 fps in the same game. Now you've paid just $70($3500/50fps) per fps.

    In the context of that $3000 system the gtx 295 is the better buy because the system is "bottlenecking" the price.
  • OSJF - Monday, February 23, 2009 - link

    What about micro stuttering in MultiGPU configurations?

    I just bought a HD4870 1GB today, the only reason i didn't choose a MultiGPU configuration was all the talkings about micro stuttering on german tech websites.
  • DerekWilson - Monday, February 23, 2009 - link

    In general, we don't see micro stuttering except at high resolutions on memory intensive games that show average framerates that are already lowish ... games, hardware and drivers have gotten a bit better on that front when it comes to two GPUs to the point where we don't notice it as a problem when we do our hands on testing with two GPUs.
  • chizow - Monday, February 23, 2009 - link

    Nice job on the review Derek, certainly a big step up from recent reviews of the last 4-5 months. A few comments though:

    1) Would be nice to see what happens and start a step-back, CPU scaling with 1 GPU, 2 GPU and 3 CPU. Obviously you'd have to cut down the number of GPUs tested, but perhaps 1 from each generation as a good starting point for this analysis.

    2) Some games where there's clearly artificial frame caps or limits, why wouldn't you remove them in your testing first? For example, Fallout 3 allows you to remove the frame cap/smoothing limit, which would certainly be more useful info than a bunch of SLI configs hitting 60FPS cap.

    3) COD5 is interesting though, did you contact Treyarch about the apparent 60FPS limit for single-GPU solutions? I don't recall any such cap with COD4.

    4) Is the 4850X2 still dependent on custom drivers from Sapphire? I've read some horror stories about official releases not being compatible with the 4850X2, which would certainly put owners behind the 8-ball as a custom driver would certainly have the highest risk of being dropped when it comes to support.

    5) Would've been nice to have seen an overclocked i7 used, since its clearly obvious CPU bottlenecks are going to come into play even more once you go to 3 and 4 GPU solutions, while reducing the gain and scaling for the faster individual solutions.

    Lastly, do you plan on discussing or investigating the impact of multi-threaded optimizations from drivers in Vista/Win7? You mentioned it in your DX11 article, but both Nvidia and ATI have already made improvements in their drivers, which seem to be directly credited for some of the recent driver gains. Particularly, I'd like to see if its a WDDM 1.0-1.1 benefit from multi-threaded driver that extends to DX9,10,11 paths, or if its limited strictly to WDDM 1.0-1.1 and DX10+ paths.

    Thanks, look forward to the rest.
  • SiliconDoc - Wednesday, March 18, 2009 - link

    Thank you very much.

    " 2) Some games where there's clearly artificial frame caps or limits, why wouldn't you remove them in your testing first? For example, Fallout 3 allows you to remove the frame cap/smoothing limit, which would certainly be more useful info than a bunch of SLI configs hitting 60FPS cap.

    3) COD5 is interesting though, did you contact Treyarch about the apparent 60FPS limit for single-GPU solutions? I don't recall any such cap with COD4.

    4) Is the 4850X2 still dependent on custom drivers from Sapphire? I've read some horror stories about official releases not being compatible with the 4850X2, which would certainly put owners behind the 8-ball as a custom driver would certainly have the highest risk of being dropped when it comes to support.
    "

    #2 - a red rooster booster that limits nvidia winning by a large margin- unfairly.
    #3 - Ditto
    #4 - Ditto de opposite = this one boosts the red card unfairly

    Yes, when I said "red fan boy" is all over Derek's articles, I meant it.
  • DerekWilson - Monday, February 23, 2009 - link

    thanks for the feedback ... we'll consider some of this going forward.

    we did what we could to remove artificial frame caps. in fallout 3 we set ipresentinterval to 0 in both .ini files and framerate does go above 60 -- it just doesn't average above 60 so it looks like a vsync issue when it's an LOD issue.

    we didn't contact anyone about COD5, though there's a console variable that's supposed to help but didn't (except for the multiGPU soluitons).

    we're looking at doing overclocking tests as a follow up. not 100% on that, but we do see the value.

    as for the Sapphire 4850 X2, part of the reason we didn't review it initially was because we couldn't get drivers. Ever since 8.12 we've had full driver support for the X2 from AMD. We didn't use any specialized drivers for that card at all.

    we can look at the impact of multithreaded optimizations, but this will likely not come until DX11 as most of the stuff we talked about requires DX11 to work. I'll talk to NVIDIA and AMD about current multithreaded optimizations, and if they say there is anything useful to see in current drivers we'll check it out.

    thanks again for the feedback
  • chizow - Monday, February 23, 2009 - link

    Oh and specifically, much better layout/graph display with the resolution selections! :)

Log in

Don't have an account? Sign up now