Who Scales: How Often?

A major topic in the multiGPU arena is software support. And there are two large factors here: how many titles benefit and how much do those titles benefit. In the past we've seen SLI provide scaling more frequently and consistently than CrossFire (especially right when games come out). With CrossFire we'll often see support for older games get broken in newer drivers and then fixed when a review site happens to stumble upon the issue. But we've also noted that when CrossFire worked, it worked really well. It's honestly been a long time since we did a quantitative analysis of how SLI and CrossFire really stack up as technologies, and there's no time like the present.

First we will explore whether performance scaling happened in our suite of games. We've looked at two different metrics to judge our cards, both of which look at percent increase from 2 GPUs. If we consider the success of a multiGPU solution to be contingent on a performance improvement of at least 30% out of a possible 100%, we can count the number of times we see success in our benchmarks as a benchmark. We ran 21 different tests (7 games at 3 different resolutions), so keep that in mind when looking at this of list successes per configuration.

NVIDIA GeForce GTX 285 17
NVIDIA GeForce GTX 280 18
NVIDIA GeForce GTX 260 20
NVIDIA GeForce 9800 GTX+ 19
ATI Radeon HD 4870 512MB 17
ATI Radeon HD 4850 19
ATI Radeon HD 4870 1GB 16

Since this takes into account CPU limited cases, our higher performance SLI and CrossFire solutions will see cases where 1680x1050 or even 1920x1200 isn't a high enough resolution to allow for any real improvement. Cards that look good by this metric are ones that both scale well and start off at a low enough performance point so as to allow good scaling to happen even at lower resolutions (well, lower for multiGPU application anyway). This shows the GTX 260 and the 4850 hit a sweet spot in terms of scaling and baseline performance in modern games to provide benefit for a larger number of users (many more people have 1680x1050 and 1920x1200 than 2560x1600 monitors). Because this 9800 GTX+ is older, we see headroom here too.

If we exclude the simply CPU limited cases and look at cases where the multiGPU solution got near zero or negative performance improvement we see a slightly different picture. Our data is on a per game basis, so all of these numbers are out of 7.

NVIDIA GeForce GTX 285 7
NVIDIA GeForce GTX 280 7
NVIDIA GeForce GTX 260 7
NVIDIA GeForce 9800 GTX+ 6
ATI Radeon HD 4870 512MB 6
ATI Radeon HD 4850 5
ATI Radeon HD 4870 1GB 7

This shows cases where certain multiGPU configurations have zero value to help improve performance because of some failing of the graphics solution. All these cases happen to be issues at 2560x1600 where the resolution proved too much to handle because of the limited amount of onboard RAM.

It's also important to point out that the Sapphire 4850 X2 doesn't suffer from the problems of the 4850 CrossFire we show here. The Sapphire card scales and performs well in every test we ran.

Index Who Scales: How Much?
Comments Locked

95 Comments

View All Comments

  • kmmatney - Monday, February 23, 2009 - link

    Especially at the 1920 x 1200 resolution - that resolution is becoming a sweetspot nowadays.
  • just4U - Monday, February 23, 2009 - link

    I disagree. I see people finally moving away from their older 17-19" flat panels directly into 22" wide screens. 24" and 1920/1200 resolutions are no where near the norm.
  • SiliconDoc - Wednesday, March 18, 2009 - link

    Correct, but he said sweet spot because his/her wallet is just getting bulgy enough to comtenplate a movement in that direction... so - even he/she is sadly stuck at "the end user resolution"...
    lol
    Yes, oh well. I'm sure everyone is driving a Mazerati until you open their garage door....or golly that "EVO" just disappeared... must have been stolen.
  • DerekWilson - Monday, February 23, 2009 - link

    The 1GB version should perform very similarly to the two 4850 cards in CrossFire.

    The short answer is that the 1GB version won't have what it takes for 2560x1600 but it might work out well for lower resolutions.

    We don't have a 1GB version, so we can't get more specific than that, though this is enough data to make a purchasing decision -- just look at the 4850 CrossFire option and take into consideration the cheaper price on the 1GB X2.
  • politbureau - Tuesday, June 1, 2010 - link

    I realize this is an older article, however I always find it interesting to read when upgrading cards.

    While I find it admirable that Derek has compared the 'older' GTX 280 SLI scaling, it is unfortunate that he hasn't pointed out that it should perform identically to the GTX 285s if the clocks were the same.

    This was also passed over in the "worthy successor" article, where it does not compare clock for clock numbers - an obvious test, if we want to discover the full value of the die shrink.

    I recently 'upgraded' to 3 GTX 285s from 3 GTX 280s through warranty program with the mfg, and there is little to no difference in performance between the 2 setups. While cabling is more convenient (no 6 to 8 pin adapters), the 285s won't clock any better than my 280s would, Vantage scores are within a couple hundred points of each other at the same clocks (the 280s actually leading), and the temperature and fan speed of the new cards hasn't improved.

    I think this is a valuable point in an article that compares performance per dollar, and while slightly outside the scope of the article, I think it's a probabtive observation to make.

Log in

Don't have an account? Sign up now