Fallout 3


We have played this game numerous times and still have not visited every location on the map or completed all seventy or so side-quests. It could be that the game’s ambiance does not seem to match its predecessors. Alternatively, maybe some of the bugs present that result in NPC characters disappearing have us longing to play Oblivion or KOTR again. Even so, we still love the game. We have moved on to playing the new content pack, Operation: Anchorage, until Dragon Age: Origins ships.

The game engine is based on the one utilized in Oblivion with a few updates, so performance is similar. We set the quality settings to Ultra, AA to 2x, and AF to 8x. Our test consists of following a path back to Megaton and in the process fighting off a couple of Raiders. We utilize FRAPS to capture our results.

Fallout 3 - AT Benchmark

Truthfully, this game does not benchmark well. The game’s level-of-detail mechanism makes constant changes as you cross the map. The LOD adjustments create a seesaw effect in the frame rates and it is difficult to tell if the sudden pause or shudder in frame rates is from the video card or the game engine. That said, the Intel i7 platform simply performs best in this game.

Once again, in our single card testing at 1680x1050 each setup is very close with the Intel Q9550 holding a 4% advantage in average frame rates over the Phenom II 940. The Phenom II posts slightly better minimum frame rates once again. In CrossFire testing the Q9550 holds a small 1% advantage, close to our error of margin. The Q9550 picks up some steam when overclocked and holds an 8% advantage over the Phenom II 940 in average frame rates and 13% in minimum frame rates with a 7% clock speed advantage. The i7 leads our two competitors in overclocked CrossFire performance by 6% and 13% respectfully.

Adding a second card for CrossFire operation improves average frame rates by 4% and minimum frame rates stay the same for the Phenom II. The Intel Q9550 has an improvement of 2% in average frame rates and 11% in minimum frame rates. The Core i7 average frame rates improve by 3% and minimum rates decrease by 7%. Overclocking our processors resulted in a 14%~19% improvement in average frame rates with the Q9550 benefiting the most.

Fallout 3 - AT Benchmark

The 1920x1200 results are similar with the Q9550 and Phenom II 940 scoring nearly the same in single card and CrossFire. We just do not see any real benefits in having CrossFire at stock speeds with the Q9550 or Phenom II 940. Once we overclocked each processor, we noticed an 11% increase in CrossFire performance on these two platforms. The Q9550 holds a slight advantage in minimum frame rates with CrossFire when overclocked while the Phenom II 940 leads at stock clock speeds.

Adding a second card for CrossFire operation improves average frame rates by 4% and minimum frame rates by 15% for the Phenom II. The Intel Q9550 has an improvement of less than 1% in average frame rates and no changes in minimum frame rates. The Core i7 average frame rates improve by 6% and minimum rates increase 5%. Overclocking our processors resulted in a 12%~17% improvement in average frame rates with the Core i7 benefiting the most.

Our Core i7 scores better with a single card setup than the other two platforms with CrossFire. The same holds true with the stock i7 CrossFire results scoring higher than our two overclocked competitors do. Overclocking the i7 CrossFire setup results in a 17% increase in average frame rates that required a 50% increase in core clock speeds.

As far as game play experiences, we noted no differences between the Intel Q9550 and Phenom II 940 platforms. Each one offered a very good experience with minimum frame rates on each platform being acceptable. The amount of LOD adjustments in the game was disconcerting at times . When we experienced them, the game stutter was minimized on the i7 setup compared to the other two platforms with CrossFire enabled. All three platforms responded in the same manner with a single card setup. Overall, we would not recommend CrossFire for this game at present; even overclocking the processors resulted in a minimum improvement in frame rates.

Crysis Warhead Far Cry 2
Comments Locked

68 Comments

View All Comments

  • Myrandex - Monday, February 2, 2009 - link

    I agree that you would probably not see a difference at all, but you can get 6GB of Ram in a PhenomII system and still keep your Dual Channel Goodness:
    2 x 2GB & 2 x 1GB = 6GB in all 4 slots, operating at dual channel mode.

    Jason
  • Goty - Monday, February 2, 2009 - link

    This is true, but then you run into the problems AMD's IMCs have when you populate all four DIMM slots.
  • monovillage - Monday, February 2, 2009 - link

    Good review and thanks for doing the work, i look forward to seeing the power numbers. With 2 very similarly priced platforms and the premium (but not out of reach i7 920) I was glad to see the P2 940 give a good account of itself.
  • duploxxx - Monday, February 2, 2009 - link

    not sure how you guys whant to run a review, but perhaps start a comparing review with competing price configurations.

    q9400 = p2 940 in price, so it's useless to throw in a q9550, it's 20% more expensive. http://www.newegg.com/Product/ProductList.aspx?Sub...">http://www.newegg.com/Product/ProductLi...43%20401...

    then trying to memic a same price range by choosing a very expensive motherboard while a same spec mobo kosts about 50$ less.

    http://www.newegg.com/Product/Product.aspx?Item=N8...">http://www.newegg.com/Product/Product.aspx?Item=N8...

    so there is already a 10% price difference.

    not to mention that a q9400 also has the same hard time getting above that 4GHZ border and is already shown in many reviews including yours that this was the marketing target against p2 940 then why the hell testing a q9550.

    I call this review total crap and waste of time for readers and reviewers.

    Just remove the first page on your review, with this kind of review you just prooven that you are not open for the best whoever it provides.
  • CPUGuy - Monday, February 2, 2009 - link

    Unless I misunderstand their intent, it appears to me that they clearly showed the PII 940 is better then a Q9550.
  • Erif - Monday, February 2, 2009 - link

    I think the purpose of this test is to see if AMD's latest processors are fast enough for higher-end crossfire setups or not.


    As for comparing the performance of specific CPUs and their prices- Anandtech did that in their Phenom II review back in January 8 review.
  • Goty - Monday, February 2, 2009 - link

    If you're going to try and tear down someone else's article, you might want to check your spelling so you don't come off as a complete idiot.
  • duploxxx - Monday, February 2, 2009 - link

    wow nice post, your added value is very high. Lets try some writing here and start with several languages, french, dutch, german, english, let's see how good you are at foreign languages.

    The fact remains that the platform is not balanced on price and marketing.
  • Spoelie - Monday, February 2, 2009 - link

    Total platform price was the same. The motherboard you linked
    1) was an open box, i.e. second-hand
    2) had the 790GX chipset, while the motherboard in the review was the FX version. The feature set of this last one is more suited to running crossfire. Of course, you would have known that from actually reading the review instead of glancing at it.

    In fact, it's a rather interesting comparison for the purpose: cpu with a little more grunt (Q9550) paired with a mainstream chipset (P45) compared to a cheaper cpu (940) paired with an enthusiast chipset (FX).

    I presume the FX was able to provide a nice boost.
  • duploxxx - Monday, February 2, 2009 - link

    FX does not boost at all, unless you require the pci-e 2.0 16x bandwith which is already shown in normal CF setups that it is not required.

    here is another one.... board cost 100$ and although it is with the sb600, there is nothing wrong with it, the P45 is also a midrange board.

    http://www.newegg.com/Product/Product.aspx?Item=N8...">http://www.newegg.com/Product/Product.aspx?Item=N8...

Log in

Don't have an account? Sign up now