Far Cry 2


This is another highly awaited title from last year that has beautiful graphics, an open ended environment, and is fun to play... but the traveling between missions tends to get repetitive. If you dial up the graphics options, the game rewards with you some fantastic visuals courtesy of the Dunia Engine. The game also features the most impressive benchmark tool we have seen in a PC game. We set the performance feature set to Very High, graphics to High, and enable DX10 with AA set to 2x. The in-game benchmark tool is utilized with the Ranch Small level.

FarCry 2 - Ranch Small

We learned two things about this game. It favors the Intel platforms, and once you provide enough GPU horsepower, the i7 is untouchable. This is especially true once the i7 is overclocked. Although not shown, our single card results with the i7 at 4.00GHz resulted in an average frame rate of 68.8 with the minimum at 54.2 and maximum at 106.2. Single card results with the Q9550 and Phenom II 940 overclocked only increased frame rates by 1fps. If you wanted to pick a single benchmark and show a large disparity in gaming performance between the Intel and AMD platforms, this is the one to use. We would highly suggest to AMD that they send an engineer to UbiSoft for game engine optimizations.

In the 1680x1050 single card tests, the Intel platforms are slightly ahead of the AMD setup; even minimum frame rates favor Intel in this game. Enable CrossFire and we see the Q9550 leading the Phenom II 940 by 7% with minimum frame rates being equal. The i7 CrossFire results are impressive with a 31% frame rate increase over the Q9550 and 41% over the Phenom II 940. Once we overclock our processors, scores improve for the Q9550 and Phenom II 940 with frame rates increasing 22% and 20% over stock CF numbers respectively. The i7 shows a similar 19% increase when overclocked. Even though the Q9550 has a 7% clock speed advantage over the Phenom II 940, frame rates improve by 17% in the overclocked CrossFire results.

Adding a second card for CrossFire operation improves average frame rates by 5% and minimum frame rates less than 1% for the Phenom II. The Intel Q9550 has an improvement of 12% in average frame rates and minimum frame rates actually decrease by 5%. The Core i7 average frame rates improve by 42% and minimum rates increase 15%. Overclocking our processors resulted in an 19%~22% average improvement in average frame rates with the Q9550 benefiting the most.

FarCry 2 - Ranch Small

At 1920x1200, the benchmarks reveal nothing new between the platforms. The Phenom II 940 is competitive with a single card, trails the Q9550 by 8% in CrossFire and 9% when overclocked, even though we start to become CPU/GPU limited on these two platforms. The Q9550 does hold a 17% advantage in minimum frame rates in the overclocked tests. The i7 is just stupid fast compared to our other two platforms with its standard CrossFire results being 8% and 18% faster than the overclocked Q9550 and Phenom II 940 processors respectively. Overclocking the i7 puts it in another league altogether.

Adding a second card for CrossFire operation improves average frame rates by 12% and minimum frame rates decrease by 8% for the Phenom II. The Intel Q9550 has an improvement of 18% in average frame rates and minimum frame rates do not change. The Core i7 average frame rates improve by 53% and minimum rates increase 26%. Overclocking our processors resulted in a 22%~26% average improvement in average frame rates with the Q9550 benefiting the greatest.

When it comes to game play experience and not benchmark tests, all three platforms responded the same at our specified settings. We did not notice any advantages with the improved frame rates that the i7 offers over the other two platforms. However, with the i7 we could change the graphic settings to Very High and increase AA to 4x and still experience very good game play. It was as if nothing changed except now we were looking at the savannahs of Africa in a much better way. These same settings were not always a pleasant experience on the other two platforms during heavy action scenes, but the game remained playable for the most part.

Fallout 3 Left 4 Dead
Comments Locked

68 Comments

View All Comments

  • megabuster - Monday, February 2, 2009 - link

    If it's not too troublesome next time please include a few pictures of your hardware set up. :)
  • none12345 - Monday, February 2, 2009 - link

    There are errors in the benchmark charts on page 9....and maybe other pages..

    In the first chart you have the overclocked 9550 CF at the top of the chart, yet if you look at the min and max frame rates it is NOT the top performer, the core i7 beats it with 5 more min frames and 12 more max frames. The overclocked phenom ii cf shoudl also beat it with 11 higher min frames tho 13 less max frames.

    In the second chart, the clear winer by the min/max frames is the overclocked phenom ii CF, it had a 9 higher min fps and 6 higher max fps yet its rated lower then the core i7. It had 21 more min fps yet only 2 less max fps then the 9550 but was ranked way lower.

    Your score or min/max numbers are fubar...something is really wrong with those charts.

    Maybe some of the other charts are messed up too, but this page stood out like a sore thumb.
  • Gary Key - Monday, February 2, 2009 - link

    The charts are sorted by Average Frame Rates, unfortunately our engine does not allow multiple sorts on values. Let me see if I can do something different in the SLI article with an Excel chart, or I might just separate all the values into individual charts..
  • 7Enigma - Tuesday, February 3, 2009 - link

    Gary, Let me just throw my opinion in to keep it sorted by average frame rates.

    That is probably the most important data point (next to possibly minimum) and so is a good way of ranking. I will thank you again and ask that all future reviews use your format of showing all 3 data points as it is very important in determining the better card for a specific game at a specific resolution/detail setting.
  • balancedthinking - Monday, February 2, 2009 - link

    The Phenom II massively gains gaming performance with an overclocked Nortbridge because it directly boosts the cache performance.

    Reviews like the one from the german site p3d showed an increase in gaming performance worth 300-500mhz core frequency for an overclock of only 400 mhz NB frequenzy!

    The NB runs stock @ only 1800 mhz. Good overclocks are in the range of 2600 - 2800mhz. Imagine the performance that is missing in the OC results from anand!

    That is why the Q9550 can pull ahead when overclocked, because due to architecture, the cache gets overclocked too wenn you raise the reference clock.

    The Phenom II 940 offers great potential when tweaking the NB clock but you have to do it manually in contrast to Q9550!

    So please Anand, redo the Phenom II 940 OC tests with the Northbridge frequency maxed out. Only that would be a fair comparison.
  • Gary Key - Monday, February 2, 2009 - link

    The NB frequency is at 2486MHz in these tests. I have it listed on page two now. I could not go higher and maintain this clock speed in Vista 64. Raising the NB speed to 2712 meant lowering CPU speed to 3842MHz. I test both values and our 3955/2486 combo performed the best.
  • Kiijibari - Monday, February 2, 2009 - link

    Perfect :)
    Thx a lot.
  • Kiijibari - Monday, February 2, 2009 - link

    I agree, an info concerning the NB clock of the Phenom2 is missing.

    @anandtech: Please add it.

    cheers

    Kiiji
  • Kiijibari - Monday, February 2, 2009 - link

    From the article:
    "(17.5x226, DDR2-1205, 5-5-5-18)"

    That means, that the NB was clocked with 2034 MHz, if nobody changed the default multiplier 9
  • CPUGuy - Monday, February 2, 2009 - link

    balancedthinking,
    Thanks for providing this tidbit of information regarding how cache is overclocked on the Intel vs AMD CPUS. If this review is based on what you said then it should be amended for re-testing.

Log in

Don't have an account? Sign up now