Conclusion

It has been a while since we first heard about the M12D at CeBIT, so Seasonic has certainly taken time in preparing this product for release. Our Seasonic contact told us they found several problems with DC-to-DC modules during development and they didn't want to release their product until they were sure they had solved the problem. According to Seasonic, they build the best DC-to-DC topology available, and our results seem to support this claim with high efficiency, low ripple, and tight voltage regulation on the 12V rail. Of course, their competitors offer similar results with only minor differences, so determining who is actually best is a matter of splitting hairs.

The M12D offers everything a high-end power supply should, with a simple, sleek appearance -- you won't find any flashy LED fans here. Build quality is extremely good as usual, and they use capacitors from one of the best vendors around, Nippon Chemi-Con. We weren't entirely convinced about the heatsink design initially, but the results speak for themselves and we have to give them credit. The heatsinks do an exceptional job of cooling the components and respond quickly to increased airflow. Of course, higher fan speeds help, but Seasonic has always been conservative in that area and we don't expect them to change.

Running at up to 50% of its rated output, the M12D 850W will satisfy pretty much any user. It is extremely quiet, staying under 17dB(A), and it's also efficient and well regulated. Seasonic informed us that they don't think most users go above 50% load anyway, and they simply like to have some headroom "just in case". We would agree with that assessment, with many users running 800W and larger power supplies even if they only use a single graphics card. Whether you use one graphics card or three, you still want high efficiency and good quality, and that's what Seasonic provides with the M12D.

Depending on your input voltage, you can stay above 85% efficiency (230VAC) or 83% efficiency (120VAC) across a large range of loads. Having high efficiency at lower loads is particularly useful, since many systems sit idle most of the time. Maximum efficiency tops out at 89%/88% (230VAC/120VAC), and European users will appreciate the fact that efficiency stays at close to 89% from loads of ~250W to 550W. Voltage regulation on the 12V rails is also outstanding, staying within 1% of 12.00V throughout testing.

Looking at the competition, the Enermax Revolution 85+ needs to be mentioned -- that's the most direct competitor right now, since we're still waiting for both of these power supplies to become available. Enermax has slightly higher efficiency, but Seasonic has better voltage regulation so it's pretty much a tie. Noise levels are also similar, so it really comes down to price. The 950W Revolution 85+ has an MSRP of $319 or €249, and the M12D 850W MSRP is $299 or €199. Enermax has a slightly higher maximum output, so prices should be very comparable (with an edge to Seasonic in Europe).

The Antec Signature Series 850W is already available with a street price of $230 -- far below the MSRP of these other units. The Antec Signature has lower efficiency, higher acoustic noise, and larger voltage regulation, but it's not dramatically worse in any of these areas. Other power supplies such as the Enhance-built Zalman ZM850-HP also post similar results but only really excel in areas such as acoustic noise. One definite advantage of the Seasonic M12D over the others is that it's only 160mm long, which is crucial if you want to use this sort of power supply in a smaller mid-tower case.

Overall, it has been well worth the wait for this Seasonic unit. They put a lot of effort into making a great power supply with very good performance and high efficiency. We can't really fault the Seasonic (or any other manufacturer) too much for high acoustic noise at maximum load, since they want to minimize RMAs and few users will actually reach maximum load anyway. Focusing more on the performance and acoustics for loads of 50% or less makes sense, and for such users Seasonic delivers a great result. Anyone looking for a power supply that can deliver anywhere from 80W to 600W of output without hurting your ears will find a lot to like with the Seasonic M12D 850W.

Temperatures, Fan Speed, and Acoustics
Comments Locked

45 Comments

View All Comments

  • sprockkets - Wednesday, November 26, 2008 - link

    Very bad waveform with very high frequency components? The "waveform" exists since it cannot perfectly make a flat line voltage.

    Besides, the ATX12V 2.3 spec allows 120 mV ripple for all 12V lines and 50 mV ripple for the 3.3 and 5V lines. It is very well within spec, and consider that these ripple specs are stricter than previous versions of the ATX12V spec, you are going to be fine.
  • valdir - Wednesday, November 26, 2008 - link

    Waveform exists since we are looking and measuring it... and there are good and bad ripple and noise waveforms on the DC rails, just compare with Antec Signature or Corsair 750W or Enermax Revolution or... definitively a very bad waveform.
    These waveforms are more like very high frequency noise covering ripple and this is not good, since on the PSU's DC rails we should see ripple and not the same noise level.
  • mindless1 - Saturday, November 29, 2008 - link

    Actually it won't make a bit of difference in use. The day a little bit of ripple or it's frequency matters, will be the day we all start using linear PSU again.
  • fri2219 - Wednesday, November 26, 2008 - link

    Why does Seasonic insist on putting crappy ADDA fans in 150.00+ units? For the same price, they could at least source from Panasonic or Yate Loon.

    That ticking sound in the "heavily undervoltaged fan" (nice heavily murderaged of the englished language, there) is incredibly annoying for those of us who haven't destroyed our hearing by playing our iPods at 90db every day for the last 5 years.
  • mindless1 - Saturday, November 29, 2008 - link

    WTF? Yate Loon is the bottom of the barrel, ADDA is mid quality. If you want a yate loon on your case wall it's not so bad but those fail pretty frequently when placed horizontally in a PSU.
  • sprockkets - Wednesday, November 26, 2008 - link

    Perhaps you can re-read page 1 where it says it uses a Sanyo Denki fan.

    And, what is "murderaged" spelling hypocrite?
  • Slash3 - Wednesday, November 26, 2008 - link

    Wooshed.
  • JarredWalton - Wednesday, November 26, 2008 - link

    FWIW, that was another error with the speech-recognition. Dragon NaturallySpeaking does so well that sometimes I miss errors in dictation. Apparently, it thinks "undervoltage" is an allowable word, but I know I said "undervolted". Whatever.

    In case you're wondering, Christoph is not a native English speaker, but he is fluent in at least English, French, and Chinese -- besides his native tongue of German. Feel free to critique his use of a second tongue; me, I'm happy to speak English, Danish, and some German. Anyway, I do pretty heavy editing of his text to clean up the English, but errors slip through on occasion. I was pressed for time on this one (had to run off to the airport) so I didn't give the final text a second proofread.
  • RallyMaster - Wednesday, November 26, 2008 - link

    "That's not entirely wrong, as PSUs are one of the components most people only think about when their old unit sales, or when building a new system."

    What does "old unit sales" even mean? Are you sure you're not saying "old unit fails?"
  • Spoelie - Wednesday, November 26, 2008 - link

    Page 1

    "The PSUs are also supposed to have very tight voltage regulation in the future only Japanese manufactured capacitors."

    I'm not quite sure what to make of that sentence.

Log in

Don't have an account? Sign up now