DC Output Stability and Quality








We decided to group all for power supplies into a single chart for each of the voltage rails. All four units have the same topology and the components are about 99% the same, so there were very few differences and it was very easy to combine the results into one chart. The 3.3V rail shows the largest spread between the models, with some of the units coming close to dropping out of spec at maximum load. The 5V rails also drop to the low end of being in spec. The 12V rails on all of the units are decent but not great, showing a total voltage regulation of 5%.






The ripple and noise were surprisingly very small, and we of course tested all of the units. There are minimal visible spikes, so this CWT built power supply at least does well in that regard.

Testing with the Chroma ATE Programmable Load Efficiency and PFC
Comments Locked

36 Comments

View All Comments

  • strikeback03 - Wednesday, November 19, 2008 - link

    Do all the fans follow that exact curve? Or does the 300W hit 30+dB near max output?

    Also, don't tip vortices flow off the tips of blades? Making a fan unlikely to suck air in from open sides?
  • cweinheimer - Wednesday, November 19, 2008 - link

    Please include the thermaltake tr2 430 watt unit for midrange budget psu comparison. In the 400-500 watt category on newegg, it appears to be the highest selling unit with 1946 reviews, and highest rating. I have a few and have been happy with them for midrange game rigs.
  • 7Enigma - Wednesday, November 19, 2008 - link

    Apparently I'll be the first post so let me say for many of us readers THANK YOU. I/we have been waiting for a review like this for the 90% of us that will benefit from these lower power supplies. I will be building a mid-range (single gpu, moderately OC'd quad) in the next 2 months and will likely be selecting from PSU's in this range. Can you give us an idea on other budget/midrange PSU lineups you might be reviewing in the near future?

    Once again, thanks from the little guy...
  • Clauzii - Thursday, November 20, 2008 - link

    Thank You also from me. Was about time with normal PSU's, for which >most< (>95%) setups will run fine.

    Do You have NorthQ PSUs in the states?? I have a 4001 running on it's 5th year or so. Seems like they also make stable products.
  • Slomo4shO - Wednesday, November 19, 2008 - link

    Agreed!

    I as well would like to thank the writers for addressing the needs of the average user.
  • Christoph Katzer - Wednesday, November 19, 2008 - link

    Thanks ;)

    I've got quite some ~500W units coming up. But just tell me what YOU want to see here and I'll make sure to get those.
  • Ptaltaica - Tuesday, November 25, 2008 - link

    I just wanted to second what everyone else has said and add a couple points.

    Reviews of lower priced ($30-50), lower capacity (250-500w-ish) units would be great. But how about some reviews of non-ATX power supplies? There are more than a few machines out there that use TFX or SFX power supplies, and while the market isn't nearly as big, most of the replacement power supplies that I've found-even from normally reputable manufacturers-are suspiciously cheap and suspiciously light. Enough so that I won't buy or use (both at home and work) systems that won't take standard ATX power supplies because I don't trust a lot of the other ones.
  • Concillian - Wednesday, November 19, 2008 - link

    Personally, I'd like to see several 300-500W reviews.

    Not only are these the sizes that normal people use, these are the sizes most likely to suffer from sub-par component selection impacting important performance parameters and manufacturers find the right corners to cut to compete in this midrange segment that basically accomodates everyone but the Sli / Crossfire users.

    I mean if Kill-a-Watt meters can be believed, I see the most power consumption in Furmark at 250W from the wall with an overclocked e7200 and overclocked HD4850. With TDP on a GTX280 at ~240W (130W above my HD4850), a 500W supply can basically accomodate anyone not using a dual card platform.

    That's a HUGE segment that would see benefit from a series of reviews in the 350-500W range.

    It used to be that you needed to go overboard on the PSU, because computers were mainly using 12v, but supplies were still made with significant output consideration on 3.3 and 5v rails older computers needed. You had to oversize in order to guarantee enough 12v. Modern supplies don't need this, there is less need to "go nuts" on PSU than ever before.

    Also, the axis on the 12v output graph has some incorrect labeling.
  • JonnyDough - Thursday, November 20, 2008 - link

    While I have to agree that a slightly lower wattage would be nice due to better efficiency and possible lower cost of the unit, I do like to have headroom. What if you don't OC and you want to someday? What if you upgrade decide to add a second card? I don't know that there's much difference between a 300w PSU and a 400w PSU. They likely cost about the same, and the 400w is bound to have a few better components inside. Anyway, I think what readers really want are a short list of the top 5 cheapest PSUs that will provide ample power for a minimum cost. PSUs are still one of those things that most people don't care about much - as long as it provides good power, isn't overly costly to purchase, and lasts. I honestly don't care what mine look like, as long as it has the leads I need - I don't even care if the cords are wrapped. Over.
  • JonnyDough - Wednesday, November 19, 2008 - link

    1. Go to NewEgg or whatever local online store that is most popular where you live.
    2. Find the cheapest PSUs rated 400w-600w (Estimated. A bit higher is fine, like Enermax's 620w PSUs - nothing below 400w).
    3. Find the most efficient longest lasting ones with little ripple and flux both 450-500w, and 600w.
    4. Recommend them.

Log in

Don't have an account? Sign up now