Silicon Optix HD HQV

The HD HQV benchmark is developed and provided by Silicon Optix. Our review of HD HQV is located here. Like the standard HQV Benchmark, the high-definition counterpart contains video tests and patterns that determine the quality of a product’s HD video signal processing. A set of five tests evaluate quality factors such as HD Noise Reduction, Video and Film resolution loss tests, as well a test for “jaggies”. We disable Aero capability and set the driver options to optimal settings.

Unfortunately, optimizing the drivers and PowerDVD 7.3 can and will make a difference in the tests where de-interlacing is important. In addition, although this test is standardized to some degree, it can be subjective at times. This depends upon how strict you abide by the guideline sheet although even it differs at times with the video example tests.


In our first test, it is obvious that Image quality of the Intel G35 and NVIDIA GeForce 8200 is not up to par with the 780G with the Film Resolution test making the difference in the scores. To be honest, the 780G was on the verge of failing this particular test (subjective opinion) without optimizing the settings in the CCC panel. We also optimized quality settings in both the NVIDIA and Intel control panels to be consistent but did not notice any real changes in this test. All three boards were close to scoring 7 points in the HD noise reduction test but failed the flower section of the test while the sailboat test did show some slight improvements.

AMD is working on further enhancements in the Catalyst 8.4 drivers for the X2 processors to improve this situation and the jaggies test. With a Phenom installed, we see the advantages of the post-processing engine coming into play. Additional tuning is also available in the 8.3 drivers with the ability to turn edge enhancement off and on. We will have the standard HQV results in our roundup. The 8.3 drivers allow the 780G with a Phenom to score 122 out of 130 points and 113 with the 4850e.

Overall, we do not put much faith into this test currently as our eight person panel seemed to have a different opinion on just about every score. In fact, only three of our esteemed colleagues were in agreement with each other on test scores for each board and those were different (higher) than our published results.

Da Setup... Operation SWORDFISH
Comments Locked

49 Comments

View All Comments

  • Gary Key - Tuesday, March 11, 2008 - link

    The 790GX features the HD 3300, which is a slight upgrade to the HD 3200 on the 780G. We are told the IGP performance differences will be slightly improved, but until we have the chipset and drivers, it will be difficult to determine if those improvement are meaningful or not. At this time, AMD is quiet about actual specs and capabilities of the 790GX. If you are a very casual gamer, Sims2/UT2004/CoH type of games then Hybrid CrossFire is a decent solution up to 1280x1024 resolution. If you want to run upcoming games and Crysis at an acceptable rate, then discreet graphics is the way to go.

    At this time, if you want an uATX form factor, the 780G is the best AMD chipset for discrete graphics performance. I have not found any real difference in performance between it and a 770X board with a HD 3870 installed. You need to go up to the 790FX for the best performing chipset with an AM2+ CPU right now. I will update this if we get a performance oriented BIOS for the GeForce 8200 board which may or may not changes its performance capabilities.
  • Genx87 - Monday, March 10, 2008 - link

    Maybe it is late.

    What is the expected cost and release date of this motherboard?

  • Gary Key - Tuesday, March 11, 2008 - link

    The reader who responded basically answered the supply and price question. :) NewEgg was running a special on the ECS board this week for %59.99 with a rebate. Our information is that all of the launch partners for this board should have supply in the channel by the end of March or early April at worst. The feature sets will determine the prices but AMD was shooting for an average street price of $75 on the 780G. The 780V will be a white box or OEM only SKU for now.

    The J&W board will not be available in the US or Canada at this time. It is the only board we have in-house that offers the SidePort memory option and with the latest 8.3 drivers, it makes a 5%~10% difference in a few games. AMD is telling us the final 8.4 drivers should allow this option to assist in lowering CPU utilization by a few percent also.
  • goinginstyle - Tuesday, March 11, 2008 - link

    The Gigabyte, ASUS, and ECS boards are available (if in stock) in the Americas at prices ranging from $69 to $99. In Europe and APAC, the J&W boards (along with the others) are available currently. The J&W will be our choice for the more performance oriented user. We expect to see boards from Biostar, abit, MSI, and Foxconn shortly at prices under $100, average MSRP for this chipset should be around $80 once supply is plentiful.
  • goinginstyle - Tuesday, March 11, 2008 - link

    Hit the enter button too soon but that information is from another website that will not be mentioned just in case it is a violation of the rules here. I bought the Gigabyte board from NEWEGG last week for $95 and found out today that the 780G chipset shows ENG0752 on it. Any comments on your boards having ENG chipsets?
  • eches - Monday, March 10, 2008 - link

    BUT sadly almost useless to me since all my HTPC builds run Linux. It would be VERY interesting to see a comparison in terms of Linux to Windows playback quality/performance since the drivers are bound to make a huge difference here.

    Also some interesting comments - my Linux HTPC runs an XP2600 (OC to 2.1 Ghz) and only just manages to handle 720p MKV playback. Can a Sempron at 1.8Ghz really manage 720p under Windows? Might be time for an upgrade *grin*
  • phusg - Tuesday, March 11, 2008 - link

    Your hardware should be plenty to playback 720p video. If only something as efficient as CoreCodec's CoreAVC was available for linux. What do you presently use to playback? Is the playback totally smooth?

    It's also a shame the hardware acceleration of HD video on the newer AGP cards isn't available on the linux side, that would be another cheap way to stretch your hardware :)
  • eches - Wednesday, March 12, 2008 - link

    Smooth at 2.13Ghz, but with some sound sync issues - this is with Xine and all de-interlacing/post-processing disabled (and minimal background processing). And indeed I am awaiting the CoreAVC player for Linux (yes, I could patch MPlayer but I'm also trying to keep the HTPC low maintenance) since this is a quick and cheap way of making the most of this old hardware.

    And cheers Gary! I look forward to the Linux article with GREAT interest - will you also be taking a look at NVidia cards and doing a quality comparison?
  • Gary Key - Tuesday, March 11, 2008 - link

    We just shipped a 780G board to one of our upcoming Linux editors to test. We should have some initial results in the next couple of weeks. I have not had a pleasurable experience with the Sempron 3400+ doing encoding/decoding work on this board under Vista. It is something I am still working on for a future HTPC article, one that we will recommend/show just how low you can go with the new IGP boards and still have a "well performing" system. Does a Sempron 3400+ and a HD 3450 card for a total outlay of $85 offer better performance on this board than a 4850e CPU only for the same price. This is something we are trying to answer with Intel, NVIDIA, and AMD hardware.
  • eches - Wednesday, March 12, 2008 - link

    Sorry I had tacked on a "cheers" at the end of the reply further down - GREAT stuff!

    "How Low Can You Go?" eh? Sounds very interesting but complex if done properly (i.e. Tests on Vista, XP and Linux; and a need to cover quite a few players in order to do quality/performance comparisons). A look at power consumption would also add an interesting slant - *possibly* putting XP/Vista in a different light when once considers TCO and Linuxs often poor power management.

    Personally I was surprised to get a XP2600 to play 720p content and could probably get it smooth without an OC if I used CoreAVC and a dedicated sound card. Given we're talking 6 year old 'junk' hardware here, a free OS etc. thats pretty low!

Log in

Don't have an account? Sign up now