Cutting Power

The power savings of the new Xbox are dramatic:

Idle Power Consumption

Gameplay Power Consumption (Halo 3) 

Playing Halo 3 on the new Falcon consumes less power than the old Xbox 360 just sitting idle at the dashboard.

Zombie Power Consumption  

With the system shut off, the new Falcon does use a little more power than the old Xbox but the difference is hardly significant.

Despite the power reduction, the console is still noisy thanks to a loud DVD drive. The major benefit to the smaller chips is power savings for you, and cost savings for Microsoft. Gotta help the boys in Redmond keep profits up.

The power savings won't translate into better gameplay, so there's no reason to upgrade. The energy savings would amount to dollars per month, definitely not making up for the cost of buying a whole new console, but our inner geek just had to open one of these Falcons and see what made them tick - and how big of a power reduction we could expect.

The New Chips
Comments Locked

46 Comments

View All Comments

  • Deusfaux - Friday, November 16, 2007 - link

    that the GPU isn't yet, and that a platform with both @ 65nm is still coming down the pipe, expected next year and has the codename of "Jasper"

    Where do I get this information? Oh, I dunno...

    http://www.dailytech.com/article.aspx?newsid=9248">http://www.dailytech.com/article.aspx?newsid=9248
  • zephyrprime - Sunday, November 18, 2007 - link

    It doesn't matter what MS says. Anandtech has physically measured the dies and thus has hard evidence that what MS says is false. What's more, given the die size of the parts, it seems like the Falcon is actually a shrink to 80nm for both processor and GPU, not a shrink to 65nm for the CPU as MS has stated.
  • j00k - Friday, November 16, 2007 - link

    i wonder why it takes MSFT so long to make the move in die shrink. CPU's already been in 65nm for quite awhile. By the time they transition to 65nm for gpu next year, everyone would have been on 45nm. im sure the technology's there already but what's the holdup?
  • Deusfaux - Friday, November 16, 2007 - link

    ok so MSFT didnt say it but still
  • j00k - Friday, November 16, 2007 - link

    The new xbox 360 mobo also appears to have some solid capacitors, which the old didn't seem to have any at all. I'm surprised that wasn't pointed out as I'm sure it should help quite a bit in keeping the system stable even at high temps. It's certainly a huge deal in the desktop mobo arena.
  • sprockkets - Friday, November 16, 2007 - link

    wonder why they did that, seeing as how they do not need to last long anyhow. Well, as long as the other caps were rubycon or japanese, that is ok. Wonder what the cost diff is between them and solid caps?

    I like the last graph that the consoles use only 2.3 watts and 2.8 watts during the game.
  • slashbinslashbash - Friday, November 16, 2007 - link

    Good to see someone scientifically documenting the differences. I had read before that Falcon had only reduced the GPU size, not CPU. Good to hear that it's both.... I guess I'll probably bite the bullet and finally buy an Xbox 360 this holiday season.
  • yacoub - Thursday, November 22, 2007 - link

    well the article doesn't really answer the important questions, like whether or not the GPU and CPU run cooler, so not sure why you find the conclusion that the hardware has changed enough reason to buy when we don't know if the changes actually make a bit of difference toward addressing the pressing issue of RRODs.
  • Orbs - Friday, November 16, 2007 - link

    What about heat? Can you put a thermometer through the "flashlight holes" in the case to see if temps improved too? Die shrinks should help but the less intense heatsink may offset that.

    In terms of the RRoD question, if the cause was heat (which is not confirmed) a test like that would help show if this will in fact increase reliability.
  • Jopopsy - Friday, November 16, 2007 - link

    Yes Anand, please post some information about the heat coming off the Zephyr and Falcon PCs !!! Most of us, from a practical perspective, don't really care so much about the die size as much as we care about the heat (as the heat has been tied to RROD).

    I for one bought a Elite 4 days ago. It was not a Falcon. It had a LG/Hitachi drive in it and it was definitely a Zephyr board. It was too loud for my tastes, and it was H O T ! ! !. It felt like a blow dryer out the back of the unit and my table was actually hot to the touch right behind my system.

    Went back to the store, found a Falcon (Premium 360 HDMI Holiday bundle LOT 739 Team FDOU - components verified w/ flashlight inspection). It has a Toshiba drive in it, and after 2 hours of Halo 3 it was only warm out the back (remarkable differance).

    I have some confidance that this Xbox might last (if it RRODs on me anytime soon I'm getting a PS3).

Log in

Don't have an account? Sign up now