Final Words

It should be clear to anyone that the Noctua NH-U12F is first and foremost a heatpipe tower and fan designed for very low-noise cooling. The included fan, the elastomeric fan mounts, and the solid vibration-free attachment to the motherboard all point to a cooler designed to take up residence in a silent computer.

The Noctua delivers on the silent promise very well as far as we can ascertain. Noise levels in every configuration were well below the test system's noise floor. However, confirming Noctua specifications requires highly specialized test environments for accurate measurements of claimed noise levels of 8 dB-A with the U.L.N.A. and 17 dB-A with a full speed S12 fan. We did confirm that the Noctua was quieter than our power supply in every configuration we tested, but that noise level is quite a bit higher than the virtual silence claimed in the Noctua specifications. Subjectively, we could hear no noise at all from the mounted Noctua cooler. For those whose first consideration is ultra-low system noise, the Noctua should certainly be on the short list of heatpipe towers worth considering.

As we have learned the hard way, however, coolers that are terrific at keeping quiet are often not the best cooling solutions for performance. We asked in the beginning if the Noctua could also acquit itself well as a performance cooler for the overclocking enthusiast. The answer is it does very well as an overclocking cooler - particularly if you equip it with a pair of fans in push-pull configuration. This is particularly easy with the Noctua, since it is grooved for front/back fans and Noctua even includes two pairs of fan-mount wires in the retail kit. The included fan is also available as a standard retail fan from Noctua.

Having said that, we should also be clear that the Noctua did not top our overclocking performance charts. Most top air coolers tested so far have reached 3.90GHz in our standard test bed, with the top Thermalright Ultra 120 Extreme reaching a record 3.94GHz with stability. The Noctua manages 3.88GHz, just a tiny amount less, but cooling temperatures are not really in the same league at this overclock as the best-performing coolers we have tested. This is with dual push-pull fans, and other configurations did not improve on this performance.

In the end the Noctua NH-U12F is a carefully balanced system of heatpipe tower and fan, which performs the designed task of cooling with silence extremely well. It is also a decent performance cooler, reaching overclock levels near the best tested. If your goal is the best overclocking cooler you can get, however, the Thermalright Ultra 120/Ultra 120 Extreme, and Tuniq Tower 120 are still your best choices.

This certainly is not a failing of the Noctua because it is a much better overclocking cooler than other coolers we have evaluated that emphasized silence first. It is also a more silent cooler than most others that advertise that feature. The fact that a higher output fan did not really improve the overclocking of the Noctua, as it did the Thermalright, Ninja and most other tested coolers, says quite a lot about the kit supplied by Noctua. If you want more cooling, add a second fan in push-pull as it works better than replacing the excellent low-noise fan provided by Noctua.

There are times when a product being evaluated doesn't top your performance charts, but it still grabs your attention. The Noctua NH-U12F is just such a product. It is a very elegant product, well conceived, logically presented, and with installation instructions that are completely on target. We like the product and would have no hesitation recommending the Noctua to most users. It will not take you to the top of the air cooler overclocking charts, but it may take you to silence if that is your goal. Unless extreme overclocking is your primary goal you will find the Noctua very satisfying. The top Thermalrights and the Tuniq 120 are better coolers at almost every frequency. So are some configurations of the Scythe Infinity and Ninja, and the Thermalrights are just as jewel-like as the Noctua. However, the careful balance of components in the Noctua is easy to admire and very satisfying.

Noise
Comments Locked

30 Comments

View All Comments

  • Hulk - Wednesday, April 25, 2007 - link

    1. Equip all fans with a variable speed controller and adjust the speed so that the decibel level is exactly 40dB, 45dB, etc... Record the temps. This would isolate the thermal transfer efficiency of the cooler. For better isolation of cooler thermal efficiency you could use the same fan on all coolers.

    2. This time adjust the fan speed to acheive the same load temperature. This time record the fan RPM and the noise level. Of course some units might not even make the temp at full speed but that would be okay. As it is right now you have to take into account cooling performance when looking at noise. It be nice to see how much noise they make when they are all drawing away the same amount of heat from the processor.

    3. In order to really give these coolers a workout how about adding an overclocked quad core to the tests?

    I enjoy reading these reviews. Great job!

  • yacoub - Wednesday, April 25, 2007 - link

    No word on fitment again. Fitment is really the number one thing people want to know: Will this fit on my board? If it doesn't fit their board, it doesn't really matter to them how well it cools. Would be great to hear if it does or doesn't clear a variety of boards you have around the testing labs, particularly a couple 680i, 650i, P965, and 975. Pick one that's fairly reference in design and a couple of the ones people tend to purchase that often have passive cooling heatsink/pipe configurations on the northbridge and MOSFETS, and let us know how well the darn thing clears it all, especially if it requires a back brace and some boards have stuff on the back beneath the CPU socket (like the MSi P6N-SLI Platinum) and whether or not it still fits.

    Thanks.
  • Wesley Fink - Thursday, April 26, 2007 - link

    The Noctua is narrower than most heatpipe towers, but as wide as a thermalright. The shape is much like a thermalright. The top plate can be installed in two directions and the cooler can be turned 90 degrees if necessary, so mounting is very flexible.

    The Noctua fit the EVGA 680i (barely, due to width and very tall chipset cooler near the socket), Asus, Striker, Asus Commando, and Asus P5W-DH Deluxe. We did not have the MSI board you specify in the lab to check, but the back plate has an open center and is designed to clear back components.

  • yacoub - Wednesday, April 25, 2007 - link

    Any word on fitment on an MSi P6N-SLI Platinum? This is important as the board supposedly has a few items on the back such that certain backplates do not fit too well and it would be important to know if this hsf can clear them alright.
  • mostlyprudent - Wednesday, April 25, 2007 - link

    Very nice. I like the balance of low noise and above average performance. Any plans to look at the Thermalright HR-01 fanless cooler with the ducting that can connect to a rear case fan? I would love to see the cooling abilities of such a configuration.
  • xsilver - Wednesday, April 25, 2007 - link

    hey wes; how many more hsf setups are still in the pipeline for review? care to list?
    is the thermalright ultra 90 one of them?
    or anything else that is of the "cheaper" level?
  • Wesley Fink - Wednesday, April 25, 2007 - link

    We have a few more top-line HSFs and then we will do an "under $30" HSF roundup. We also have a wide assortment of 120mm fans in the labs for a fan roundup.
  • xsilver - Wednesday, April 25, 2007 - link

    oh also, was there any plans to put some "classic" coolers in the chart as a control reference?
    Im thinking thermalright xp-90/120
    zalman 7000/7700

    how do these type of coolers compare to the ones currently being reviewed? no full review is really needed but putting them in the charts would be nice.
  • puffpio - Wednesday, April 25, 2007 - link

    The 'Final Words' page is actually a duplicate of the 'Noise' page
  • Wesley Fink - Wednesday, April 25, 2007 - link

    The posting error on Final Words has been corrected.

Log in

Don't have an account? Sign up now