Inside the TV Wonder DCT

Before we get to the installation, we obviously have to take you on a quick tour of the TV Wonder DCT itself:


Two LEDs: one indicates that you're authorized on your cable network, the other one indicates that you're good to go in Vista

The CableCARD goes in the front, while you connect power, USB and the cable input on the rear of the device:

In the off chance that someone who buys this system doesn't have cable at all, but rather satellite, the ports on the top of the system can be used as a passthrough:

There is an internal version of the TV Wonder DCT that will be shipping at the same time as the external version, but it too will connect to the PC via USB. It is up to the OEM to use either the internal or external version; you need an extra tuner for each simultaneous video stream you want to watch/record, making the internal version more attractive for multi-tuner setups.

Remove four simple screws and we can gain access to the inside of the device:

The analog tuner is powered by an ATI Theater 550 Pro:

The rest of the components are on the main board that accepts the CableCARD itself:

Interestingly enough there appears to be a PCIe x1 connector at the bottom of the main PCB:

The Platform The Installation: Day One
Comments Locked

29 Comments

View All Comments

  • DigitalFreak - Tuesday, April 3, 2007 - link

    Uh.. I don't think you understand how these things work. The only inputs on the 650 & AIW are composite and S-video. Neither is going to allow you to record anything in HD from your cable box. The HD support on the 650 is only for OTA.
  • BPB - Tuesday, April 3, 2007 - link

    You know, until now I thought the AIW X1900 had YPrPb input. Man, I need to wake up!
  • TheTerl - Tuesday, April 3, 2007 - link

    I was amused by the choice in movies. After all, who wouldn't want to check out "Boinking in the Dorm Room" at work? With a title like that, I'm sure it's a cinematic masterpiece.

    Aside from that, very interesting article.
  • DigitalFreak - Tuesday, April 3, 2007 - link

    Thing is, it may show up in the guide, but you can't actually order it... :0)
  • WileCoyote - Tuesday, April 3, 2007 - link

    Only Anand can turn an article I would normally ingore into a fun and interesting read. Good stuff!
  • MercenaryForHire - Tuesday, April 3, 2007 - link

    Agreed. While I have nothing but distaste for this hardware, its related metric assload of DRM tie-ins, and lack of DIY support, I enjoyed reading the review of it immensely.
  • pjladyfox - Tuesday, April 3, 2007 - link

    "why on earth would you go through this when you can just rent an HD-DVR from us for $9 a month?"

    I think this pretty much sums up the entire system to begin with. It really does make me wonder if the unholy alliance (read: MPAA/RIAA/Cable/Telco) is making the use of CableCard-based devices more difficult than it needs to be. The number of people that were called on-site just to resolve the multiple issues is a rather telling statement that while the tech may be great it is being set up to fail in the marketplace.

    And why was there no provision for HDMI input? I mean, it was designed with HDCP encryption in mind so I would have thought this would have been a no-brainer but if I had to guess I would say the unholy alliance shot that idea down real quick. -_-
  • DigitalFreak - Tuesday, April 3, 2007 - link

    Cable companies are required by the FCC to provide cable cards upon request. However, it's pretty obvious they make it as difficult as possible to get them up and running ($42.95 install fee?).
  • tuteja1986 - Tuesday, April 3, 2007 - link

    I hope the person incharge of this project reads this because he needs to get up his lazy ass and start sloving these issue by getting the right dude to slove this problems. Then ATI TV Wonder Digital Cable Tuner + VISTA MCE will succeed or Hollywood could just kill DRM which would make life easier on their loyal customer.

Log in

Don't have an account? Sign up now