Closing Thoughts

The Gateway FPD2485W is one of the more recent LCDs on the market, and it performs very well. Is it the best option currently available? We haven't tested a lot of other displays, so we can't say for certain, but it appears to be competitive with most other options in the same category.

For many users looking at purchasing a new display, one of the overriding factors is going to be price. That's what helped turn Dell into one of the largest display providers in the world, as given the choice between a 24" Dell LCD or a more expensive but higher-quality 20"-21" LCD from someone else, quite a few people have been more than happy to stick with Dell. The fact that Dell's LCDs are actually very good also helped.

Gateway seems to have a good understanding of the market - and well they should considering that they compete in other markets against Dell - and they have produced a product that takes a very similar approach. The FPD2485W isn't a perfect LCD, but it performs very well overall and it is available at a very attractive price. Currently, the FPD2485W is listed for $680 on the Gateway web site, while the regular price of the Dell 2407WFP is $750. Dell routinely runs sales, however, and the 2407WFP is available for $675 right now. You basically end up with two very similar monitors that cost about the same amount, although the Dell comes with a three-year warranty included making it a slightly better deal.

The small difference in price probably isn't enough to sway most people one way or the other, so it's going to come down to performance, features, and any other extras. The bottom line for the consumer is that we're getting more competition in the large LCD market from a major manufacturer, and as the AMD/Intel price wars have shown us, competition is good for the consumer. Two years ago, 24" LCDs cost nearly twice what they do now, and they have now moved from the ultra high-end price range into a more palatable high-end classification. If you're still running a CRT and are finally thinking about upgrading to an LCD, most of the 24" models will impress and the Gateway FPD2485W is one of those you should keep on your short list of options.

About the only real problem we encountered during testing is the inability of the Gateway FPD2485W to reproduce a smooth gradient scale. Banding is very apparent in such cases, and while this won't really affect gaming or to a lesser extent video content, some users and especially graphics artists are likely to be disappointed. We could also hope for a more streamlined OSD interface, but the color gradients are a far bigger concern. Overall color accuracy is good, with a relatively low Delta E score, but it seems that the Faroudja signal processor may not actually be doing as well as we would like. The image processor seems the more likely culprit, as in other areas the panel appears to be the same as that used on Dell's 2407WFP.

One final area that we haven't really talked about is how opinions differ by individuals. Some people are blessed with much better eyesight, and what we find more than acceptable might disappoint. If possible, we always recommend that you try out displays in person, and that is particularly important if you are one of the more discerning viewers of the world. Pixel response times for example are now fast enough that most people don't notice the slight blurring that is still present on nearly all LCDs, but there are individuals out there that have serious issues with pixel smearing. If you're one of those, the new Gateway LCD doesn't appear to be any better or worse in that area than earlier Dell models, so it is unlikely to change your mind in that respect.

As we stated at the outset, it has been a long time since we last performed any display reviews at AnandTech. Our goal is to rectify the situation, and we hope to have numerous display reviews over the coming months. Initially, we're going to be focusing on covering some of the more popular products that are already on the market, as they will help to establish a baseline performance metric. We're also looking for feedback from our readers, so if you have any comments or suggestions please feel free to drop us a line.

Color Accuracy
Comments Locked

77 Comments

View All Comments

  • Aquila76 - Thursday, February 22, 2007 - link

    Chizow,
    Did you run the gradient test from xtknight's website (linked above)? I'm curious to see how yours fares. I handpicked a Dec '06 model from Best Buy, but it still borked that thing badly no matter what bright/cont/R/G/B etc. I had it set to. I got most of my settings from the thread over at , but none seemed to eliminate the transition issues / color accuracy for me. :(
  • chizow - Thursday, February 22, 2007 - link

    Ok, I applied the color profile Jarred provided (thanks again!) and colors do look much better, a lot more like the 2407WFP out of the box. Ran the gradient tests in full and windowed mode. In windowed, there is no significant banding or gradients although there is some faint gradient lines and banding on the straight color strips at the transition between the corresponding 1st and 2nd blocks. Seem to be uniform vertically through the pattern although they're unnoticeable on the magenta strips.

    In full screen mode, the banding is more obvious but again, its limited to the lower dark areas and don't extend past the 3rd block. After the 3rd block, the transitions are flawless. I wish I ran these before I calibrated the settings to see if its my panel or the calibrated settings.

    Unfortunately, it looks like these settings will only apply under WinXP.

    Jarred did you change the OSD/EzTune settings at all? Also, if you're really bored, would you mind calibrating the panel using EzTune or the OSD? Lol, well was worth a shot at least. Thanks again for the help and review.
  • Aquila76 - Thursday, February 22, 2007 - link

    Heh, somehow clipped the last phrase off.

    ...from the thread over at HardForums.
  • Aquila76 - Thursday, February 22, 2007 - link


    WTF? I used a BRACKET H BRACKET and it hides the text?
  • Aquila76 - Thursday, February 22, 2007 - link

    Sorry for all the quotes of myself.

    The first one should have ended with:

    ...the thread over at HardForums.
  • chizow - Thursday, February 22, 2007 - link

    I haven't run any extensive tests, but I'll check out Xtknights later when I get home. The few tests I have run were just html-based static images, and I can honestly say I saw very little gradient issues on the 2 panels I had (DEC annd current JAN). Banding was another issue though and pretty severe depending on content, source resolution/quality, and colors etc. I'll have to look over the definitions to make sure they're not mutually exclusive, so I'll have to get back to you on that one.
  • JarredWalton - Thursday, February 22, 2007 - link

    Beware the open-bracket H close-bracket abbreviation used for a certain other site! :D

    We use brackets for our pseudo-HTML, and that one just happens to correspond to turning on white text. It comes up now and then, but thankfully you figured it out before the thread was very long. LOL We had a thread a year or two back where about 20 people responded trying to figure out WTF happened to the text. I think a guy had posted a comment where he used {H} five or ten times, which only served to make things more difficult to "fix".
  • Aquila76 - Thursday, February 22, 2007 - link

    Eeks. I'll have to keep that in mind! Another cool test on xtknight's site (www.lcdresource.com) is a Dark Grayscale test. It's in the same section as the gradient. Mine just showed all black unless I cranked the brightness up to eyeball-melting. Granted, this is difficult for any LCD to display properly due to the issue of backlighting.

    I think what really pushed me over the edge on this monitor is that the last few bands of the grayscale showed up on my HP L1706 at work and the gradient shows flawlessly on it. A ~$700 display beaten handily by a ~$150 display hurt much more than my wallet. That was the final deciding factor on my returning the Gateway. I don't know how they managed to screw up this panel so badly. AFAIK, the Dell and Samsung 24" (same panels) had this resolved before the Gateway was released.
  • JarredWalton - Thursday, February 22, 2007 - link

    I believe my sample is an earlier run from around November, but I didn't notice any issues with PSU buzzing. Could be that the color banding was a result of the early run - I don't know for sure. As for settings, I set contrast to 60% and ended up with brightness at 61%. The color profile will of course vary somewhat from panel to panel, so I'm not sure how helpful providing my particular profile will be, but if you want to give it a look, here you go:

    http://images.anandtech.com/reviews/monitor/2007/g...">FPD2485W Calibrated Profile

    Caveat Emptor! :)
  • chizow - Thursday, February 22, 2007 - link

    Wow that was fast! thanks :) A lot of 2485W owners will be happy. I think a lot of people got the brightness/contrast settings similar to yours, but color accuracy is a whole different monster, like whack-a-mole almost. Solve one color problem only to make one much worst. For me, its like tuning a guitar. I know what doesn't sound right, I just don't know how to fix it. :) That profile should help a ton though, thanks again!

Log in

Don't have an account? Sign up now