Conclusion

While DDR2 Memory does not exhibit the same bandwidth or performance on the AM2 and Conroe platforms, they do perform at the same timings and voltages when going from one platform to another. This was clearly demonstrated in benchmarking tests performed on AM2 and Conroe platforms. This means readers can examine test results performed on a Core 2 Duo test bed with XYZ memory, and reasonably expect that XYZ memory to perform at the same speeds and the same memory timings and voltages on an AM2 platform - provided those settings are available.

There are always the variations in chipset and BIOS that can cause problems with a memory on one brand/model of motherboard and no problems on another brand/model, but that is also true even if you are planning to use the DDR2 on the same type of platform. We have sometimes seen where a brand of memory runs very well on an MSI platform, for example, but where it would not run at all on a DFI platform using the same chipset and CPU. Those types of compatibility issues will always happen, but in general if a memory tests well on Conroe it should do just as well on AM2.

This fact will make our memory testing much simpler, and we plan to perform all upcoming memory testing on the currently more flexible Core 2 Duo test platform. AM2 buyers can expect similar results with the same DDR2 memory on their AM2 motherboards.

A few conclusions about AM2 performance compared to Core 2 Duo performance are also inescapable in looking at our test results. First, Intel has done a remarkable job of concealing the issue of not having an on-processor memory controller. The intelligent look-ahead for memory works very well, and it makes the chipset-based Core 2 Duo memory controller appear to be as fast as the on-processor AM2 in many cases. This does not change the fact that the AM2 memory bandwidth is really greater than Core 2 Duo or the fact that AM2 scales better in memory, exhibiting a steeper slope in performance increase as memory speed increases than does Core 2 Duo. That just means as Memory Speed increases AM2 will benefit more and Intel will eventually need to move to an on-processor controller.

Probably the hardest conclusion for many will be the fact that increasing memory speed, increasing clock speed, and increasing CPU speed alone will not be enough for AM2 to catch up to Core 2 Duo in performance. The performance gap that remains when overclocking AM2 to 2.93GHz at 266 clock speed with DDR2-1067 is still huge. A die-shrink from 90 to 65nm and the additional cache that will allow will definitely help, but we are even skeptical there with Core 2 Duo already overclocking to 4GHz and beyond. No doubt AMD will find a solution, but it is now clear this will not be an easy fix for AMD.

The deep price cuts announced by AMD yesterday will definitely help. The new numbers indicate AM2 will be very competitive at the low end to low-mid of the processor food chain - a spot they have held in the past and where they have still managed to survive. The low end looks very competitive, and AMD is positioned close enough to mid-range in performance to keep Intel honest. There is no mistaking, however, that Intel Core 2 Duo owns the mid to high-end of the current processor market.

With this memory analysis, the memory playing field is hopefully a lot clearer for those shopping for DDR2 memory. Our next memory articles will compare memory performance of DDR2 on the Core 2 Duo Memory Test Bed. This began with the 6 high-performance memories and the 7 value memories tested in the Conroe Buyers Guide. It will continue with evaluations of the fastest memories available from both Corsair and OCZ.

2.93GHz with DDR2-1067 Performance Comparison
Comments Locked

118 Comments

View All Comments

  • TonyB - Tuesday, July 25, 2006 - link

    so ive been hearing a lot of people use this argument, "oh competition is good, i can get a so-and-so cpu now for xyz price!!". what an incredible value!

    cant you bring that a notch higher and say, "dang, Intel just whooped AMD, i'm going to purchase an amd K6-2 400mhz cpu now for $5" yes! horray for competition! what an incredible value only $5!

    at what point does reality set in that you're investing in obsolete technology? or does the old rationale, "i dont want the fastest, this old crap is good enough for me" still apply.
  • OcHungry - Wednesday, July 26, 2006 - link

    You waited 4 years to say that "crap" about AMD's bargain value? but please dont tell us about your 4 years venture in finding a better way to exhust your P4 hot air.
    very nice.
  • Calin - Wednesday, July 26, 2006 - link

    Unfortunately, the current production processors don't reach that low a value (the AM2 semprons have a price of around $70+, and the Socket A semprons have a price of around $50). You might want to invest in new obsolete technology (with a longer warranty), or you might want to invest in old obsolete technology (or in old current technology, see refurbs).
    As long as your performance needs are reached, you could be certain to a degree that a failure in your computer could be repaired/replaced in short time, you are ok to go with Pentium MMX or so processors. Anyway, finding SDR RAM for your K6-2 might not be so easy (and SDR DIMMs were a new memory standard then). Good luck finding enough SIMMs to put the memory at 128MB
  • BPB - Tuesday, July 25, 2006 - link

    How about an article spending $200 on both the CPU and video card ($400 total) and then look at what various motherboard and memory combos get me. You could spend $100 to $250 on motherboards and show me what I get, with memory hopefully being the same for the Intel and AMD systems. That's really the bottom line for myself and many, many others. Many if not most of us set a price range for CPU, video card, and memory and then go from there. Either that or simple overall cost is set. I know you give us buying guides where you spend X amount on systems, but I don't think you show us the power each system gets.
  • photoguy99 - Tuesday, July 25, 2006 - link

    They already have those articles - They periodically release CPU and Graphics card guides that analyze the bang for the buck at different budgets.
  • BPB - Tuesday, July 25, 2006 - link

    I know they do that, but I don't think I've seen both "here's what $1000 gets for an AMD/Intel system" and "here's how fast each system is". That's what I'd like to see. I know how much individual parts cost and how fast they are in and of themselves, but put it all together and show me systems and compare those systems. If they've done that in the past I've missed it. But the past no longer matters, so I'd love to see one that's current as of today's new prices.
  • Calin - Wednesday, July 26, 2006 - link

    The computer price guides did just that - taking a budget of $$$ or $$$$ and building systems. There was the budger guide, gamer guide and "all out" guide (this last one had price ranges at $2000+)
  • bob661 - Tuesday, July 25, 2006 - link

    What was the purpose of this article? Was there something that was left out of the tons of earlier benchmarks from various websites?
  • bob661 - Tuesday, July 25, 2006 - link

    Thanks guys. I don't remember seeing info about memory either.
  • rjm55 - Tuesday, July 25, 2006 - link

    There were a lot of things that I hadn't seen anywhere else. No one I have read shows that Conroe is lower in Bandwidth than either AM2 or Netburst. I find that surprising looking at Conroe's big performance lead. This is also the first time I've seen AM2/Conroe compared clock-to-clock in the same configuration using the same memory/settings - and at 2.93GHz. The new graphs for memory speeds show directions and provide more info that bar charts. Suggest you use them more in other reviews.

Log in

Don't have an account? Sign up now