Mushkin eXtreme DDR2-667


The Mushkin DDR2-667 memory arrived with the highest price in our value roundup, an excellent heat spreader design, but performed below average at the DDR2-667 and DDR2-800 settings. We raised the voltages but did not have any success in improving the timings at these settings. However, the Mushkin ran at stock voltages for the low latency DDR2-400 and DDR2-533 settings although the 3-3-3-8 timings at DDR2-533 could not be improved with additional voltage to match the 3-2-2-7 timings of other modules. Also, this is the only memory in our group that would not run 4-3-3 settings at DDR2-800. Although the performance difference is minimal, the cost of this kit indicates the memory should perform better.

Mushkin - DDR2-667 - 2x1GB
Model # 991512
CPU Ratio Memory
Speed
Best Memory Timings
(Voltage)
(4:3) 400 DDR2 3-2-2-5
1.8V
(1:1) 533 DDR2 3-3-3-8
1.8V
(4:5) 667 DDR2 3-3-3-10
2.1V
(2:3) 800 DDR2 4-4-4-12
2.0V


Patriot DDR2-667


Patriot Memory provided their Extreme Performance series memory modules that provided above average performance at voltage settings that were more than acceptable for 24/7 operation. The memory comes with stylish heat spreaders and was able to easily clock up to DDR2-900 at extended voltages and 5-5-5-15 timings, though we recommend the lower latencies at DDR2-800.

Patriot - DDR2-667 - 2x1GB
Model # PDC22G5300LLK
CPU Ratio Memory
Speed
Best Memory Timings
(Voltage)
(4:3) 400 DDR2 3-2-2-5
1.9V
(1:1) 533 DDR2 3-2-3-7
1.9V
(4:5) 667 DDR2 3-3-3-8
2.1V
(2:3) 800 DDR2 4-3-3-8
2.1V


PQI Turbo DDR2-667


The bargain of the bunch has to be the PQI Turbo kit that is currently selling for around $117 with rebate. While the timing performance of the memory was excellent we had to run at voltages higher than the group's average to meet these settings. The base voltage for this particular model is 2.0V, something to be aware of based upon our results with the other memory modules.

PQI - DDR2-667 - 2x1GB
Model # PQI25400-2GDB
CPU Ratio Memory
Speed
Best Memory Timings
(Voltage)
(4:3) 400 DDR2 3-2-2-5
2.0V
(1:1) 533 DDR2 3-2-2-7
2.0V
(4:5) 667 DDR2 3-2-3-9
2.2V
(2:3) 800 DDR2 4-3-3-9
2.2V


Wintec AMPX DDR2-667


The Wintec AMPX DDR2 Extreme series of memory was the pleasant surprise of the group as it generated excellent timings at low voltages at the lower memory speeds. It performed average at DDR2-800, although the results are more than acceptable.

Wintec AMPX - DDR2-667 - 2x1GB
Model # 3AXD2675-1G2S-R
CPU Ratio Memory
Speed
Best Memory Timings
(Voltage)
(4:3) 400 DDR2 3-2-2-5
1.8V
(1:1) 533 DDR2 3-2-2-7
1.9V
(4:5) 667 DDR2 3-3-3-8
2.15V
(2:3) 800 DDR2 4-3-3-9
2.2V


Comparing Value Memory

All of the memory in the value section was able to run on average 4-3-3-9 settings at DDR2-800 except for the Mushkin modules that were limited to 4-4-4-12 but at a low 2.0V setting. The performance delta is extremely minor and the lower voltages are welcomed, but the Mushkin memory is the most expensive in our group so we naturally expect more from it.

The ability of all our value memory to run at very low latencies at DDR2-667 and 4-3-3-9 latencies at DDR2-800 is just incredible given the average price of $148 for a 2GB kit. Not even a year ago this type of performance in the DDR2 world would have placed this "value" memory at the top of performance charts. We found the Elpida memory to offer higher overclocks at lower memory voltages overall than the Infineon based modules, making it the current leader in value performance memory in our opinion.

The two modules that stood out were the A-Data Vitesta DDR2-533 and Wintec AMPX DDR2-667. During testing, both offered a unique combination of price, performance, and stability. All of the memory reviewed is more than acceptable for a Conroe system and the performance differences are so minor that we suggest choosing a supplier based upon prior experience, warranty, or price in this case. We will be looking at additional value memory modules from other suppliers shortly along with providing performance test results with our new Core 2 Duo Memory test platform.

Value DDR2 Recommendations
Comments Locked

123 Comments

View All Comments

  • Gary Key - Wednesday, July 19, 2006 - link

    I did not see any tpoys... :)
  • R3MF - Wednesday, July 19, 2006 - link

    "The 965 has an X8 PCIe slot and an X4 PCIe slot and does not support CrossFire"

    the tech-diagram on the same page clearly says:
    16x PCIe on the northbridge
    6x1 PCIe on the southbridge

    which is it?
  • JarredWalton - Wednesday, July 19, 2006 - link

    I've edited the wording slightly. You are correct that the NB only supports an X16, and there is at most an X4 from the SB. It should read correctly now.
  • yacoub - Wednesday, July 19, 2006 - link

    How about a pagedetailing who actually has them in stock and hasn't price-gouged them? ;)
    It could link to the RTPE.
    Hopefully by the time Part2 comes out, C2Ds will actually be available.
  • Gary Key - Wednesday, July 19, 2006 - link

    We are disappointed in the intial pricing structures but when demand exceeds supply you know what you get.... :)
  • zsdersw - Wednesday, July 19, 2006 - link

    No GA-965P-DS3? Is there a reason it wasn't included in the roundup?
  • Gary Key - Wednesday, July 19, 2006 - link

    We have one on its way for review in the near future for review. In fact, over the course of the next four weeks we will probably receive 20 or more Conroe boards so expect a lot of motherboard coverage in August. ;-)
  • zsdersw - Wednesday, July 19, 2006 - link

    Thanks. Looking forward to it.
  • yacoub - Wednesday, July 19, 2006 - link

    Thank you, guys! This is a huge help.
  • danidentity - Wednesday, July 19, 2006 - link

    GREAT article!

    I wonder if the 965 chipset over time will become faster than 975 with BIOS revisions.

Log in

Don't have an account? Sign up now