Mid Range GPU Performance w/ HDR Enabled

Next we looked at mainstream GPU performance, targeting graphics cards that were priced at or below $300; for reference we've tossed in a few pairs of cards running in SLI or CrossFire.

Not only have we reduced the resolution, but we've significantly reduced the image quality settings here. The result is a good balance between image quality and performance, however we would much rather play with our high quality settings as Oblivion can be one very impressive looking game with the details cranked up.


The white lines within the bars indicate minimum frame rate

The king of the mid range is actually the Radeon X1800 XT offering pretty much the best performance you can get for under $300, even outperforming the GeForce 7900 GT. If you already have a Radeon X1600 XT and happen to own a CrossFire capable motherboard, then simply picking up one more X1600 XT will do wonders for your performance. Remember that the X1600 series can run in CrossFire mode without any external dongle, so all you need are two X1600 XTs and you'll be looking at fairly good performance. While we wouldn't recommend purchasing two X1600 XTs (you're far better off with a single 7900 GT), if you already have one it's the cheapest way to get a good performance boost in Oblivion.

The GeForce 7600 GT proves to be a good middle of the road performer here, offering good performance while being priced at under $200.

The GeForce 6600 GT is unfortunately overwhelmed by our medium quality settings, and unfortunately has now become a low end contender as far as Oblivion is concerned. Running a pair of 6600GTs in SLI improves performance a bit but still no where near what a pair of X1600 XTs will do in CrossFire mode.


The white lines within the bars indicate minimum frame rate

Once again we see that there's no significant performance difference between the GPUs at the top of the charts, but performance really begins to drop off after the 7600 GT.


The white lines within the bars indicate minimum frame rate

The Medium Quality Dungeon benchmark is very friendly to the NVIDIA cards here, with the first ATI showing being the X1800 GTO half way down the graph. The GeForce 7900 GT and Radeon X1800 XT continue to be the best performers here, but the 7600 GT isn't too far behind.

High End GPU Performance w/ Bloom Enabled Mid Range GPU Performance w/ Bloom Enabled
Comments Locked

100 Comments

View All Comments

  • Crassus - Wednesday, April 26, 2006 - link

    quote:

    This first part will focus on high-end and mid-range PCIe GPU performance and future articles will look at CPU performance as well as low-end GPU and AGP platform performance if there is enough demand for the latter two.


    Here, demand *wave* (at least concerning an AGP platform review). I've got a trusty K8N Neo2 with a 939 3000+ and a 6800 GT that was sort of standard about 1 1/2 years ago and I'm trying to figure out if I would gain a FPS increase worth talking about switching over to PCIe, while staying in about the same price range, or getting a 7800 AGP, or just turning down settings and saving the money.

    Cheers and thanks for an article that I was very anxious to read.
  • Ozenmacher - Wednesday, April 26, 2006 - link

    Everyone argues about how bad the performance is outside. I am running a 7900 GT and I was getting around 20 fps outside, I truned the grass off completely and now I get over 30. And honestly, I don't even notice it. I tjhink the game looks better than the rather lame looking grass.
  • Madellga - Wednesday, April 26, 2006 - link

    I can't see any pictures in this article. I've tried both IE and Firefox, at 2 different computers.

    Is it only me or anyone else has the same?
  • JarredWalton - Thursday, April 27, 2006 - link

    Can you see the graphs even?
  • nicolasb - Thursday, April 27, 2006 - link

    I can't see any of the pictures either, including the graphs.

    I'm getting really fed up of this happening in Anandtech articlres: it's been happening on and off for months, now. Could you guys please <b>sort it out</b>? It's really very unprofessional to have allowed the problem to go on for this long.
  • JarredWalton - Thursday, April 27, 2006 - link

    Nothing has changed on the images in a long time. Are you surfing from work or home? Do you have any ad blocking software? I suppose it could also be browser settings. I know you can configure Internet Explorer and Firefox to not load images by default, or to only load images for the originating web site. The article content comes from www.AnandTech.com or as the images come from images.AnandTech.com. There's really nothing for us to sort out if the problem is on your end, but hopefully my comments will help you solve your issues.
  • Madellga - Thursday, April 27, 2006 - link

    I found it. The feature causing the problem is Privacy Control. I just turned off and now the page works fine.
  • JarredWalton - Friday, April 28, 2006 - link

    I'm glad to hear you got it working. If it's any consolation, I've felt that every release of Norton Internet Security since 2002 has actually been a step backwards. The latest release seems more bulky, slow, and more prone to causing errors. There was a time where I thought Norton Utilities was the greatest thing ever in terms of useful software. Windows 95 started to reduce its usefulness, and as far as I'm concerned windows XP pretty much killed it off. These days, I feel like I can get better overall quality from free software in many cases.

    I think the only reason Symantec is still in business is due to all of their bundling agreements with various computer manufacturers. So many systems come with Symantec software preinstalled as a 90 day trial, but lucky for me I've found that 90 days gives me more than enough time to uninstall the junk! I've found that a hardware firewall is generally much more useful, in that it's less likely to cause problems, either with web sites or with system performance.
  • Madellga - Thursday, April 27, 2006 - link

    It was definetely not the browser. All options are default.

    Add blocking is turned off. I have to find which Norton feature is causing the issue. Interesting enough, the problem seems to happen only at Anandtech.
  • Madellga - Thursday, April 27, 2006 - link

    Thanks for the reply. I am surfing from home and I have this problem since a couple of weeks. Based on the comments above, the only thing I have running that could be the problem is Norton Internet Security......

    I just turned off the Norton Firewall and reloaded the page. Now it works!

    Jeez, it sounds silly but I expected more from Symantec. And my copy is an original one, legally purchased - no hacking.

    That feels awful....

Log in

Don't have an account? Sign up now