Test Setup

The ULi M1695 and M1697 chipsets fully support all AMD Athlon 64 processors in both stock and overclocked conditions.

Performance Test Configuration
Processor(s): AMD Athlon 64 4000+ utilized for all tests
RAM: 2 x 512MB OCZ Technology PC4800 Platinum Edition Settings- DDR-400 at (CL2-2-2-5, 1T)
Hard Drive(s): 2 x Maxtor MaXLine III 7L300S0 300GB 7200 RPM SATA (16MB Buffer), 1 x Maxtor MaXLine III 7L300R0 300GB 7200 RPM IDE (16MB Buffer)
System Platform Drivers: ULi SATA Driver - 1059
ULi PowerExpress Engine Enabling driver - 1006E
Video Cards: 1 x MSI 7800GTX (PCI Express) for all non-SLI tests
2 x MSI 7800GTX (PCI Express) for SLI tests
Video Drivers: NVIDIA nForce 81.98 WHQL
Cooling: Thermaltake Big Typhoon
Power Supply: OCZ Power Stream 520
Operating System(s): Windows XP Professional SP2
Motherboards: Asus A8N-SLI Premium
Albatron K8SLI
Foxconn NF4SK8AA-8KRS
Asus A8R-MVP (ATI RD480/ULi1575)
Asus A8N32-SLI Deluxe

We tested our MSI 7800GTX video cards utilizing NVIDIA 81.98 WHQL drivers to provide recent performance results. Resolution in all benchmarks is 1280x1024x32 unless SLI operation is enabled. Resolution in SLI game benchmarks is 1600x1200x32 with 4XAA and 8xAF implemented where applicable. 3DMark and Aquamark3 benchmarks use a "Standard Score" setup at the 1024x768 video resolution for both SLI and non-SLI testing.

ASRock 939SLI32-eSATA2: Overclocking General Performance & Encoding
Comments Locked

46 Comments

View All Comments

  • Zoomer - Tuesday, March 7, 2006 - link

    I believe it should be included to comparison's sake. And perhaps push manufacturers to adopt it.

    If new HD camcorders supports firewire 800, the market will be there right away. Too bad they aren't backward compatible.
  • deathwalker - Thursday, March 2, 2006 - link

    At $85 I don't see how anyone could ask for much more in a motherboard...SLI/eSATA//8 channel sound/varity of Raid array choices. Can't hardly beat this for a basic and even higher platform. Kadoos to Asrock for a worthy effort. Before this thread is over someone will be slamming this mobo from some position other than one of using a rational approach for what you would be getting for $85 and they will be trying to compare it to a competetors $150 motherboard. AT..keep up the good work.
  • Pete84 - Thursday, March 2, 2006 - link

    The Asrock AM2 riser has been spied.

    http://www.hkepc.com/bbs/blog.php?tid=558875&s...">http://www.hkepc.com/bbs/blog.php?tid=5...time=114...
  • poohbear - Thursday, March 2, 2006 - link

    Just remember ASRock is a dodgy mobo company. In their Dualsata2 mobo they gave reviewers a bios that allowed em to overclock using the 300mhz cpu frequency then they cap it @ 274 in subsequent bios'. Meanwhile, us customers read the reviews and their site/manual which states it can support a 300cpu frequency only to find a a 274mhz cap. Very deceptive of em. The dual sata2 was the only mobo that provided native agp and pci-e, so ASRock got away w/ dodgy BS like that cause there was no other company offering the Uli1695 chipset.

    In this situation, there are a ton of other exceptional PCI-E mobos, especially w/ ATI's 580 just being released, so why even consider em?!
  • sandorski - Thursday, March 2, 2006 - link

    that's not what happened. go back and re-read what that was about.
  • Gary Key - Thursday, March 2, 2006 - link

    quote:

    Just remember ASRock is a dodgy mobo company. In their Dualsata2 mobo they gave reviewers a bios that allowed em to overclock using the 300mhz cpu frequency then they cap it @ 274 in subsequent bios'. Meanwhile, us customers read the reviews and their site/manual which states it can support a 300cpu frequency only to find a a 274mhz cap. Very deceptive of em. The dual sata2 was the only mobo that provided native agp and pci-e, so ASRock got away w/ dodgy BS like that cause there was no other company offering the Uli1695 chipset.


    I would not consider ASRock a dodgy motherboard company. We at times find the initial bios releases to contain performance enhancements or features that might not be available upon production release of the boards. We (along with others) provide feedback to the manufacturers about the stability, features, or performance during testing. At times this feedback will cause the manufacturer to change the bios features to improve stability or as in our Biostar NF4 article to improve performance also.

    We are taking a more serious stance with the motherboard companies in regards to their bios features before publishing an article. We could have published this article with the .17 bios release (not available) and shown additional voltage features along with improved performance as mentioned in the article. We waited until ASRock had the production release bios available before publishing our revised test results. We found the board to be better behaved with the release bios at the expense of performance. However, this the correct path as being able to score a few additional points in a benchmark or overclocking that extra bit is not important if the board produces BSOD results on a consistent basis. It also is not wise to release a bios with features the public will never see. I personally still have issues with Asus and the 0047 bios we tested on the P5N32-SLI board. Some of the features of that bios are still not available at this time and it is worrisome to publish an opinion about a board and not see the same level of performance or stability in the released product.

    While there are other alternatives (excellent ones at that) I doubt you will find a board with this combination of performance and features for $85. If you are hard core overclocker this is not the board for you. If you like to casually overclock without pushing the boundaries then this board will suffice for a great number of people. It is all about choices and fortunately we will see some additional M1697 based boards before NVIDIA completes their assimilation of ULi. ;-)
  • poohbear - Thursday, March 2, 2006 - link

    quote:

    We are taking a more serious stance with the motherboard companies in regards to their bios features before publishing an article.


    that's definetly good to hear. it's blatantly unacceptable when mobo manufacturers want to promote something that is'nt in their mobo so they can get good initial reviews and hence sell more, and then disable said feature when it becomes inconvenient to support. (the Dualsata2 still proports to support 300 cpu frequency both on ASRock's site and in their online manual, but it's simply not supported)
  • nemesismk2 - Friday, March 3, 2006 - link

    You have said a couple of times that on the Asrock website it states that the Asrock 939 Dual Sata2 supports 300 Mhz CPU Frequency, can you tell me where because I can't find anywhere on http://www.asrock.com/product/939Dual-SATA2.htm">http://www.asrock.com/product/939Dual-SATA2.htm which confirms what you have been saying?
  • nemesismk2 - Thursday, March 2, 2006 - link

    Asrock are NOT a dodgy company at all, they are just a company who supply good quality budget motherboards which are not designed for overclocking. Yes it was found that the motherboard could use 300mhz cpu frequency with an early bios but it was also found that the motherboard wasn't stable using that frequency so it was reduced for stability reasons. I've never had any stability problems with my Asrock 939 Dual Sata2 so their decision was correct for most users, good work Asrock! :)
  • poohbear - Thursday, March 2, 2006 - link

    ppl w/ beta bios were running this mobo 350+ cpu frequency, so how can u say it's not stable? they're just not fixing it because, yes, they could care less about anybody who overclocks, but they shouldnt give the impression that this mobo supports something it doesnt. For all we know anandtechs overclock w/ this mobo might be completely misleading because ASRock might do the same thing and disable any such features when it's inconvenient for them to support em.

Log in

Don't have an account? Sign up now