Antec P150 (cont'd)

Before popping off the side of the new Antec case, we took a look at the rear and were pleased to see a large 120mm fan, especially given the case's dimensions. As always, larger fans generally are preferred, since they can move more air while making less noise. There's also venting near the expansion slots for additional passive cooling.


Click to enlarge.

To get an unobstructed view of the interior of the P150, we took out the included power supply. What we were left with was simple, but not bad by any means. Overall, the P150 feels very solid. We're sure that it would be able to protect expensive components for a long time, but one would have to be mindful of the nice paint job.


Click to enlarge.

Not including the external 3½" drive bay, the P150 has enough space for four hard drives, which is certainly plenty for most users. In this view, one can see how incoming air is directed over the hard drives, and if one wanted additional cooling, two extra 92mm fans could be installed.


Click to enlarge.

Also note the rubber bands stretched across the sides of this cavity. These can be used for suspending the hard drives to effectively isolate all vibrations entirely from the chassis. Keep in mind that this is only a solution for users who don't transport the case though - when in transit the sleds must be used as shown here. The manual even makes mention of this.


Click to enlarge.

To get at the drives in the P150, we have to open the entire front bezel. Three tabs hold it in place on the left side, then it hinges like a door for a while before being able to be lifted completely off the hinge. In another effort to truly separate this case from cheaper models, the entire area where intake air can be channeled through is covered by a double-height removable filter.


Click to enlarge.

Once the front door has been lifted away, two thumbscrews are loosened and another door swings open to the left. In this shot, we've also already removed the air filter.


Click to enlarge.

Antec P150 Antec P150 (cont’d)
Comments Locked

69 Comments

View All Comments

  • Tamale - Friday, January 13, 2006 - link

    You know, several of those descriptions never did sit well with me.. and perhaps I am a little too biased towards the geekier look... I'll try to tone down my enthusiasm for the X1 a bit.

    As for the hard mounting vs. soft mounting, our maxtor IDE drive is very very quiet, and seeking noises couldn't be heard in the P150 at all even using the "hard" (silicone grommets) mount.

    Seeking sounds were only barely audible in the E68 and X1.
  • strikermlc - Friday, January 13, 2006 - link

    I'm sorry, but the statement about the p150 falling short because it doesn't even have a "classy window" on the side is incredibly funny to me. Personally the p150 is the only one out of the three cases that would aesthetically have a chance of making it into an open living space in my home. I'm just as big of a gamer and hardware geek as anyone and I've been a daily reader of anandtech for years - but that comment in my opinion clearly reinforces that while anandtech should be held in very high regard for their knowledge of hardware - their aesthetic evaluations are clearly lacking.

    While the front of the raidmax case is not unforgivable - the side panel is. The window is downright tacky and the decorative arrows around the window are laughable - as if the window that will soon be displaying countless oversized glowing fans and other lights is incapable of attracting enough attention on it's own?

    I realize everyone is entitled to their own opinion. And while I'm sure there are plenty of twelve year old anandtech readers drooling over this case, the window on this case is in no means and under no circumstances "classy" and it never will be. There have got to be plenty of adult readers at anandtech that will agree with me on this point.

    True class is understated - and that's what I want my case to exhibit. Well designed functionality, quiet, crisp clean lines and quality materials - brushed metal and glossy paint are certainly fine, it doesn't have to be boring by any means. It just shouldn't fill the room with a whirling, glowing, fire-eating circus show.

    Ah well, I've made my point. $0.02 from a graphic designer that loves his pc's and computer hardware just as much as the next anandtech reader, and unlike most graphic designers, regard's mac's as simply an overpriced novelty item.

    Thanks and good night.

    aaron
  • yacoub - Friday, January 13, 2006 - link

    Well stated, aaron. The P150 is the most mature looking of the three cases - the most gimmick-free. Everything about it is functional and meant to meet its design goals of the best quiet-computing mid-tower on the market. It succeeds.
  • Erssa - Friday, January 13, 2006 - link

    I cannot believe that the amateur reviewer hardmounted the HDD instead of using the soft mount method, that would have subjectively really made a difference in sound levels.

    Very superficial review overall. I wonder what the reviewer would have said about the cases had he used a silent cpu cooler (even zalman 7700cu fan mated would have been good) and passive GPU. I believe it would have really turned out the table for antecs advantage. Sound measurements from the sides would have been a nice addition aswell. Since antec was the only case that had no ways for sound to escape from the side. Measuring noise from 6" doens't make too much sense either since nobody has his head 6" from the front of his computer. Something like 1m would have been nice, but that would have probably ment that combined with more silent combonents the sound measuring device would have proved itself inadequate.
  • Xenoterranos - Friday, January 13, 2006 - link

    That wouldn't have really been a case test then would it? It would have been a silent-cpu-cooler-and-passive-gpu-cooler-in-cases-x-y-and-z test.

    While I can't disagree on the technical merrits of the Raidmax case, those little blue triangles really turn me off. Maybe I'm just not aesthetically inclined.
  • Trippytiger - Friday, January 13, 2006 - link

    The Antec may be the most expensive of the group, but it seems to me that it also comes with the most trustworthy power supply of the three as well. I know I'd want to replace the power supply in that Raidmax case if I were going to use it.
  • Tamale - Friday, January 13, 2006 - link

    You can get it without one entirely if you want for only $50. Also, heed my note about the Raidmax supply - it's been running strong (and still is by the way) in another decently-equipped PC here in my lab.
  • mindless1 - Friday, January 13, 2006 - link

    It's been running, but what is "strong"? That it runs? The question with such PSU is not does it run but how long it does and what happens when it begins failing. If it does not last the life of the system, another PSU must be bought and all savings are negated.
  • Tamale - Saturday, January 14, 2006 - link

    By strong I simply mean steady voltages, even under load. And of course, length of life is an issue, but I've only had the power supplies for a few weeks, so I comment on that much, other than the fact that both Antec supplies I received have problems with the 3.3v rail.
  • leofischer - Friday, January 13, 2006 - link

    I doubt the drives were suspended, because he says
    'Also note the rubber bands stretched across the sides of this cavity. While we're not 100% sure, we are fairly certain that this is an effort to help minimize vibrations from the hard drives that may cause additional noise within the case.'
    duh..
    Doesn't seem like he realised what the bands were for. I assume there is some kind of explanation accompanying the case or mention of the suspension method in literature, but I wouldn't know.

Log in

Don't have an account? Sign up now