Albatron K8SLI: Features

Albatron designed a beautiful board with an excellent layout, considering the small form factor utilized. The board is lacking most clearance issues and was extremely easy to install in a mid-size ATX case. Albatron did an excellent job with the color coordination of the various peripheral slots and connectors.

The DIMM module slots' color coordination is correct for dual channel setup. The power plug placement favors standard ATX case design and the power cable management is very good. The floppy drive port connector is on the outside edge of the board next to the DIMM modules slots. The two nForce4 IDE port connectors are conveniently located on the front edge of the board along with the 24-pin ATX power connector.

The nForce4 SATA II ports are conveniently located down and to the left of the IDE port connectors. The SATA II ports feature the old attachment design that could create connection issues.

The nForce4 USB connectors, BIOS, and System Panel connector are located along the front edge of the board. The CMOS reset is a traditional jumper design located next to the battery.

The board comes with (2) physical PCI Express x16 slots, (3) 32bit PCI slots, and (2) PCI Express x1 slots. The layout of this design offers a good balance of slots and allows for numerous add-in peripheral cards.

In between the two x16 PCI Express slots is a PCI Express x1 slot. This configuration could potentially render this slot useless when utilizing the first x16 PCI Express slot. We did not have any issues utilizing this slot with video cards containing single slot cooling systems, but we were unable to install a network card upon installation of a NVIDIA 7800GTX 512mb in the x16 PCI Express slot. The first PCI slot next to the second PCI-E x16 slot will be rendered useless when utilizing a two-slot video card cooling solution.

Returning to the CPU socket area, we find ample room for alternative cooling solutions. We utilized the stock AMD heat sink, but also verified that several aftermarket cooling systems would fit in this area during our tests. However, the Zalman CNPS7000 series cooler covered the fan on the CK8-04 chipset, which could limit airflow to the chipset.

The CK8-04 chipset is actively cooled and located between the CPU socket and the first PCI-E x16 slot.

Albatron places the four-pin 12V auxiliary power connector at the top of the CPU socket, which creates a potential cable management issue or airflow issue if your cable is short.

The rear panel contains the standard PS/2 mouse and keyboard ports, parallel port, LAN (RJ-45) port, and 4 USB ports. Located below the parallel port and to the right of the PS/2 ports is the Coaxial S/PDIF port. The audio panel consists of 3 ports that can be configured for 2, 4, and 6-channel audio connections.

ASUS A8N-SLI Premium: Overclocking Albatron K8SLI: Overclocking
Comments Locked

37 Comments

View All Comments

  • Gary Key - Tuesday, January 3, 2006 - link

    Hi,

    I have been informed by Blue Gears that the significant differences we are seeing is due to the current beta driver set. They recently released a 64-bit driver set that improved performance up 18% in some applications. The general C-Media driver that was provided last fall was in worse shape than the June beta for the 32-bit operating systems so they went back to the drawing board. If you go back and read some of our recent Intel reviews you will see that Realtek has improved their HD codec performance by up to 40% in some instances over the last three driver releases. The A380 release we utilized for the ALC850/655 was around 9% better in Serious Sam II and BF2 (not shown yet) over the A379.

    I would not be concerned with their next card at this point. They are very customer focused and are doing everything possible to improve the performance of the C-Media driver sets.
  • yacoub - Wednesday, January 4, 2006 - link

    Thanks for the replies, Gary. Looking forward to seeing better numbers. I totally understand what you mean about scenes breaking up. I experience that as I'm waiting for the new BlueGears card to come out later this month so I'm running the onboard ALC-8xx series audio on the A8N-SLI Premium I have. It's pretty crappy and sometimes heavy action scenes with lots of sound sources seem to chug the computer and now I see that's typical of the onboard solutions.
  • yacoub - Tuesday, January 3, 2006 - link

    quote:

    Obviously, if you are a serious gamer, then a dedicated sound card is still a requirement to ensure consistent frame rate averages across a wide variety of games.


    Considering the surprisingly poor results of the BlueGears and CLabs X-Fi cards in the actual gaming tests, why do you state that like it's an "obvious" conclusion when the numbers state exactly the inverse - that the onboard audio solutions, as cpu-grubbing as they are, actually provide the better framerates in most of the games tested?

    Unless your results are anomalic, I'll have to start my soundcard research all over again. I was sold on the upcoming X-Plosion but now that it doesn't really gain me much if anything in the way of cpu usage improvement during gaming (half the purpose of getting a peripheral soundcard to begin with), I only end up with better audio quality (the other half of the purpose) and for that, yes, the BlueGears card should be better than the X-Fi series, but I really want to get better cpu usage as well. Hmmmm...
  • Gary Key - Tuesday, January 3, 2006 - link

    quote:

    Considering the surprisingly poor results of the BlueGears and CLabs X-Fi cards in the actual gaming tests, why do you state that like it's an "obvious" conclusion when the numbers state exactly the inverse - that the onboard audio solutions, as cpu-grubbing as they are, actually provide the better framerates in most of the games tested?


    The audio quality of those two sound cards are significantly better than the Realtek ALC850/655 codecs across the spectrum. Their performance at times is worse in absolute numbers but the difference in consistent frame rates while playing on-line and within the game was significant from a subjective viewpoint. We are finishing our benchmark suite for showing (consistently) the low/average/high frame rates with sound enabled. I did not publish the BF2/F.E.A.R./HL2 numbers yet as we needed time to verify the benchmarks were repeatable with the latest patch updates. However, the two add-in cards scored better and have more consistent frame rates than the on-board sound solutions. In a couple of scenes in the BF2 benchmark the on-solutions would stutter and the scence would break up, this never happened with the add in cards.

    The lastest SSII patch and Creative drivers should improved the scores even further in that game. In Serious Sam II we were quite surprised by the results and they shadowed the same results from the last Intel article. Although I can make out the near/far audio effects being played with a set of high end headphones on the ALC850 codec, it in no way compares to the sounds being played back by the XFI and Mystique. The sound on the ALC850/655 is tinny and muffled while you can hear exacting details in the same scenes with the other two cards. It is even more obvious in F.E.A.R and BF2, almost to the point of wondering if you were listening to the same audio playback.

    Also, the on-board ALC850/655 solutions only support up to 26 buffers in the drivers.

    Thank you.
  • Gary Key - Tuesday, January 3, 2006 - link

    quote:

    In a couple of scenes in the BF2 benchmark the on-board solutions would stutter and the scene would break up, this never happened with the add-in cards.


    Really need an edit function, hit the button before I finished proof reading.
  • Spacecomber - Tuesday, January 3, 2006 - link

    Shouldn't the game benchmarks, at least, have focused on performance running two video cards in SLI? There was some mention in the Final Words section of using two video cards on these boards; so, I got the impression that this might have at least been tried. Still, it comes across as an after-thought, which seems to miss the point of a thorough testing of what is the main feature of these boards.

    Just a bit puzzled.

    Space
  • Gary Key - Tuesday, January 3, 2006 - link

    Good Day,

    We will have SLI benchmarks up once we complete the SLI roundup that consists of several more boards between the $80~$140 range. I might modify the article to include our initial results between the three boards tested. The issue is previous boards were tested with the 78.x drivers while these boards were tested with the 81.85 driver set. There is a significant performance difference in several benchmarks between the two driver sets that would have been confusing. We have not gone back and tested all of the boards in SLI with the 81.85 up to 81.98 drivers yet.
  • deathwalker - Tuesday, January 3, 2006 - link

    Odd that the Albatron and Foxxcon come out very satisfactory in the testing and the don't make the Motherboard roundup that came out only 2 days ago. Great review though and it nice to see that you can save a couple $ on off-brand mobos and still get a decent product.
  • Gary Key - Tuesday, January 3, 2006 - link

    quote:

    Odd that the Albatron and Foxxcon come out very satisfactory in the testing and the don't make the Motherboard roundup that came out only 2 days ago. Great review though and it nice to see that you can save a couple $ on off-brand mobos and still get a decent product.


    We still have several more value to mid-range SLI products to review and as such any final recommendations will be done at the completion of the testing cycle.
  • Calin - Tuesday, January 3, 2006 - link

    On the second page, in the table, all the boards have slots for DDR2 memory. It should be DDR, I think

Log in

Don't have an account? Sign up now