Conclusion

Have we found a new champion TV Tuner card? That depends on what you're looking for. All three of the cards have something to offer, and unfortunately, no single card is going to please every potential user. Here's how we see the breakdown of cards.

For the best analog picture experience, the ATI Theater 550 cards continue to get our recommendation. The included software with the PowerColor card was disappointing with its lack of an EPG - though European customers won't have a problem - but the quality was still great and the card is Windows MCE compatible. If analog support is still moderately important, yet you also want HDTV support, the Fusion5 card does okay. If you pair it with Windows MCE for analog channels and only use FusionHDTV for the HD channels, the end result is generally good. The MyHD card really has difficulties with analog channels, unfortunately, but it comes out on top in DTV reception, and if you throw enough processing power at the problem, the analog capabilities match and even surpass the Fusion5.

OTA DTV support can be found in quite a few other products that cost less than either the Fusion5 or MyHD. If that's all you're after, you would probably be better off getting a good DTV tuner and a good analog tuner for now. If you can't get a good terrestrial signal, though, the Fusion5 and MyHD become interesting. For QAM support, the MyHD wins out, but since both cards are just capturing a transport stream, there isn't a difference in quality. MyHD's lack of MCE support is a minor drawback as the UI could use some improvements, but it's something that you can learn to live with. If you plan on using the MyHD with an HDTV, we would also recommend the DVI daughtercard or a VGA to component transcoder.

The real problem with the QAM cards is that you're spending quite a bit of money for hardware that might be obsolete in a year (when CableCard will apparently finally debut alongside Windows Vista). If you already have digital cable with HD support, it's probably a $10 per month or less increase to get a DVR box upgrade. $10 per month means that you can get two years of DVR use with all of your channels for the price of the MyHD+DVI, or just over a year for the price of the Fusion5 Gold. Of course, you have far less hard drive capacity (40 or 80 GB is typical in set-top cable boxes), and you can't burn the files to a DVDR, share them with friends, or watch them from another computer. If that's what you're after, and if you've already spent the money on a nice HDTV, $250 for the MyHD plus DVI card is going to get you some fun toys to play with. Also, if you just have standard cable, it's closer to $15 or $20 a month to upgrade to HDTV plus DVR.

If you can live without DTV support (or if you don't have an HDTV), and you want a PCI Express TV Tuner, you'll be very pleased with the PowerColor card. If you don't care about the PCI Express interface - and it really doesn't add anything in terms of quality or performance - then getting any of the other Theater 550 PCI cards will also work. It's nice to see that the price premium for the PCIe version of the card really isn't that big; you can find the PowerColor PCIe T55E-PO3 from Newegg for $94 shipped, while the PowerColor T55-PO3 costs about $85 shipped. There are probably some Shuttle SN25P owners who will be glad to find a use for their PCIe X1 slot.

Overall, none of the cards reviewed today are perfect. There are three options covered here: great analog with no digital; great digital with no analog recording unless you have a dual-core system; or decent analog and great digital with a slightly less friendly user interface. What we really want now is to have ATI, PowerColor, or someone else equal the analog quality of the Theater 550 and add in DTV support - and personally the QAM support is required, as OTA just doesn't work for my needs. Even though dealing with the numerous sub-channels on digital cable can be irritating, it's better than not to have the ability to receive those channels at all.

While we're making requests, we'd like to see something combining the best of both the Fusion and MyHD cards (and software) into a single option. It shouldn't be that difficult to modify the MyHD to get analog encoding performance closer to the level of the Fusion5. Maybe we'll see this in something like a MyHD MDP-140. Fully integrated and working EPGs for all three cards should also be way up on the "to-do" lists for these companies. The last item for our wish list isn't targeted at the manufacturers; rather, we would like to plead for all the broadcast companies to shift to full HDTV. Hopefully, with the release of the Xbox 360 and the upcoming PlayStation 3, HDTV adoption will finally reach the point where broadcast companies create HDTV content and downsample it to analog resolutions, rather than recording analog or SDTV and scaling the content to HDTV resolutions. (Yeah, I know - I'm dreaming.)

With all that said, if I had to go out and buy a TV tuner card right now, the MyHD MDP-130 would be my choice. It's expensive and the analog has steep hardware demands, but I can handle both of those requirements. I can even deal with the less-than-perfect user interface - if you've ever installed Linux and managed to get it hooked up to the Internet and playing video, you can certainly handle the MyHD software. This is not a wholesale recommendation, but the MyHD fills an important niche for people like me. If you want both digital and analog support and you lack a dual core system for running the MyHD, adding in something like the PowerColor for your analog channels is also a reasonable choice.

Video Quality Comparison
Comments Locked

77 Comments

View All Comments

  • JarredWalton - Thursday, December 8, 2005 - link

    The only system it impacted was the MyHD for analog. I did perform most of the tests at stock clock speeds. But yeah, I should probably make that note. (The X2 was overclocked to 2.6 GHz as well, if you didn't notice, but I only tested the MyHD card in that system.)
  • The Boston Dangler - Wednesday, December 7, 2005 - link

    "While the Toshiba 46H84 is in fact a 1080i display - or really a 1920x540p display, if I understand it correctly"

    The display has 1080 horizontal lines of resolution, scanned alternately. 1080i format signals carry data roughly equivalent of 540p.

    My opinion: Having owned both 1080i and 720p sets, and watching programs in their native formats, the difference in pic quality is entirely upon the display. There are both formats present in OTA/Cable, something always gets converted. Either format can provide great pics, even after conversion. It's all about the display.


    "The onscreen Guide also doesn't work for me - it shows up blank - but this appears to be at least partly Comcast's fault. The FusionHDTV software is supposed to read the EPG information from the channel stream, but Comcast isn't including that in my area, as far as I can tell. (This was a problem on the MyHD as well, so that lends credence to the assumption that the local Comcast provider is to blame.)"

    EPG is usually considered an extra service by content providers, thus a cable box and subscription are required. There are online alternatives, sometimes with handy plugins.
  • slashdotcomma - Wednesday, December 7, 2005 - link

    What's the lag between signal and display? Would I be able to use any of these tuner cards and play on a gamecube,xbox(360),ps2/3, etc?
  • JarredWalton - Wednesday, December 7, 2005 - link

    I'm not quite sure what you mean. Are you trying to capture videos of your gameplay? Or just get the game console input onto your computer screen? Tuning to digital channels introduces about a two second lag, and on analog channels it's more like a .5 second to one second lag. Obviously, neither of those would be acceptable for gaming. It sounds like what you really want would be some form of transcoder?

    Note: it never even occurred to me to test this aspect of the cards, and I don't have a game console with which to test it. Sorry -- I'm a PC gamer. :-)
  • slashdotcomma - Wednesday, December 7, 2005 - link

    Yes, I'm trying to get the game console input onto my computer screen. Lag for changing channels and lag between signal and screen is slightly different. For example, I played around with an AIW-9800 pro and changing channels would introduce a slight lag, but playing game consoles on it was beautiful. No lag, and everything was smooth as silk (p42.8c, 1gb ram, don't remember which MMC v9 it was). Actually it doesn't even have to be a video console, try plugging in a dvd player or vcr and try moving around in the menu. I wish more reviewers would add this to part of their reviews. I plan on playing around with Dscaler if I get the chance. There are ways to hook up game consoles to computer screen but you lose the recording ability and in some cases DVI support. Do you have a chance to play around with the older tv tuners as well?
  • JarredWalton - Wednesday, December 7, 2005 - link

    I don't have any older TV Tuners, though Anand might still have some of them. I'll have to see if I can get a game console over to try out in this fashion. I might actually have an N64 boxed up somewhere. I use PCs for DVD watching, and I don't have a VCR either, so it's going to take a bit of work. I do know that if I tune in the Comcast box to an analog channel and at least one or two of the tuners (I don't recall which), they were not in sync with each other; the Comcast was slightly ahead all the time, so it seems like lag is present.
  • sprockkets - Wednesday, December 7, 2005 - link

    I record for example LOST from the s-video out on my HDTV receiver, and it goes to a Lite On recorder on highest quality, and if you see it you would be hard pressed to tell the difference. Or, you can simply record 720x480 at a high quality via s-video in and get the same results on these cards. Of course that means setting up two devices.

    Does HDTV recording from these cards preserve the Dolby Digital 5.1 signal as well?
  • segagenesis - Wednesday, December 7, 2005 - link

    Yes, they should. If you have ever checked out any of the Lost tv torrents you would be familiar that this is possible also ;)
  • vailr - Wednesday, December 7, 2005 - link

    ATI's MMC v. 9.10 may work with 550 tuner cards, according to this thread:
    http://www.rage3d.com/board/showthread.php?t=33835...">ATI words on MMC 9.10: Dual-tuner MulTView + 550 support!
    Combined with their Gemstar GuidePlus software, would enable an electronic program guide.
    Note: MMC 9.10 is not currently available on ATI's web site; only on the software CD provided with their latest XT180AIW card.
  • vailr - Wednesday, December 7, 2005 - link

    quote:


    Print this article
    Email this article
    Find the lowest prices or Buy it from PC Alchemy.com for $79.95
    Bookmark this article


    The link is for the older PCI version, not the currently reviewed PCIe version.

Log in

Don't have an account? Sign up now