Basic Features: Asus A8N32-SLI Deluxe

 Asus A8N32-SLI Deluxe
CPU Interface Socket 939 Athlon 64
Chipset NVIDIA nForce SPP 100 Northbridge
NVIDIA nForce4 SLI Southbridge
Bus Speeds 200 to 400MHz in 1MHz Increments
Memory Speeds DDR200, 266, 333, 366, 400
(433, 466, 500 with Rev. E AMD)
PCIe Speeds 100-200MHz on 1MHz Increments
NB to SB Frequency 200-300MHz in 1MHz increments
PEG Link Mode Auto, Disabled, Normal, Fast, Faster
PCI/AGP Fixed at 33/66
Core Voltage Auto, 1.0V to 1.5625V in 0.0125V increments
PLUS 0.2V in vCore Boost
(Maximum vCore 1.7625V)
CPU Clock Multiplier 4x-25x in 0.5X increments
DRAM Voltage Auto, 2.6V to 3.2V in .05v increments
HyperTransport Frequency 1000MHz (1GHz)
HyperTransport Multiplier Auto, 200MHz to 1600MHz in 200MHz increments
SB to NB Frequency 200MHz to 1600MHz in 200MHz increments
HyperTransport (LDT) Voltage Normal, +0.2V
Northbridge Voltage Normal, +0.2V
Southbridge Voltage Normal, +0.2V
Memory Slots Four 184-pin DDR DIMM Slots
Dual-Channel Configuration
Regular Unbuffered Memory to 4GB Total
Expansion Slots 2 PCIe x16
1 PCIe x4
3 PCI Slots
SLI Full Dual x16 SLI
Onboard SATA/RAID 4 SATA2 Drives by nF4 (RAID 0, 1, JBOD)
PLUS 2 SATA2 Drives by Sil 3132
Onboard IDE/IDE RAID Two Standard ATA133/100/66 (4 drives)
Onboard USB 2.0/IEEE-1394 10 USB 2.0 Ports by nF4 (9 on Wi-Fi model)
2 1394A Ports by TiTI
Onboard LAN 2 Gigabit Ethernet PCIe Ethernet by Marvell 88E1111 PHY, Marvell 88E8053
PLUS Wireless LAN 54 Mbps on WiFi Model
Onboard Audio AC '97 Realtek ALC850Codec
8-Channel Audio with 6 Auto-Sense Jacks
Coaxial and Digital SPDIF on back IO
BIOS Revision AMI 0301 (9/30/05)

Yes, this is an Asus board, and not a DFI or Abit. The feature set and adjustments are extremely broad compared to any board. The names of the options are sometimes a little different and the adjustment ranges are often set up differently, but everything that an enthusiast needs to get the most from the Asus A8N32-SLI is here.

This Asus provides memory voltage all the way to 3.2V, among the best that we have ever seen from a tier 1 board maker. This should be an adequate range for any memory on the market other than the disappearing VX and Redline high-voltage modules from OCZ and Mushkin. While nothing on the market really comes close to the DFI memory voltage range to 4V, adjustments to 3.2V are more than adequate for current 2 GB modules and any other current DDR RAM.

Memory adjustments are the broadest that we have seen on an Asus board. The ranges are not always as extensive as a DFI or ATI Reference board, but the assortment of control options is just as wide as you will find on any production board.

We know of no other current AMD motherboard with HTT adjustments to 1600. However, don't get too excited by this. We quickly found that the HTT settings above 1000 don't work and the board freezes when they are selected. When we asked Asus about these expanded settings, they told us that they were included for a future enhancement of the AMD on-processor memory controller, which may or may not happen based on the latest information that they have received. The settings above 1000 don't work with current processors, even with the E6 memory controller.

CAS 1.5 is an option in the BIOS, but Asus tells us that it is really a feature for extracting the best performance from DDR333 memory. Sure enough, we couldn't get it to work with DDR400. However, it worked fine with DDR400 memory at DDR333 - providing an interesting option for extreme overclocking.

Asus A8N32-SLI Deluxe: Board Layout Overclocking: Asus A8N32-SLI Deluxe
Comments Locked

95 Comments

View All Comments

  • Marlin1975 - Friday, November 4, 2005 - link

    quote:

    It is ironic that NVIDIA pioneered decent on-board sound with their nForce2 chipset, and they now have the worst audio solution available for AMD


    That can not be stressed enough. I don't mind paying a couple extra bucks to get a nice VIA Envy sound or even the new C-media Dolby chip. But the ac97 realtek junk needs to die.
  • phusg - Friday, November 4, 2005 - link

    quote:

    quote:

    quote:
    It is ironic that NVIDIA pioneered decent on-board sound with their nForce2 chipset, and they now have the worst audio solution available for AMD


    That can not be stressed enough. I don't mind paying a couple extra bucks to get a nice VIA Envy sound or even the new C-media Dolby chip. But the ac97 realtek junk needs to die.


    Agreed. Only it's even worse: nVidia pioneered decent on-board sound with their nForce1 chipset (not nForce2).
  • Concillian - Friday, November 4, 2005 - link

    I definitely agree, and don't think this was mentioned in the 'Final Words'.

    With lack of PCI-e support from soundcards and many other add-in cards, it's important to minimize add-in cards, especially on an SLI setup where slots may be eaten up by coolers for the 2 video cards.

    With the way this board is layed out, if you have 2 cards in SLI with big coolers you have 1 PCI and 1 x4 PCI-e slot left. If you're forced to populate the PCI slot with a soundcard you're done... seeing as how there are very few PCI-e cards out there.

    I would also not be blaming nVidia... ASUS could implement a better audio solution if they wanted to (like DFI does with Karajan and MSI does with SBLive!), but they chose not to. To blame nVidia seemingly absolves ASUS of responsibility, and that's not right. The board is made by ASUS, not nVidia. Any blame for a poor audio implementation belongs to ASUS.

    nVidia supposedly had little demand for soundstorm because motherboard manufacturers weren't ordering enough. At least that's the story that was fed to us. Giving specific manufacturer designs poor ratings because of crappy audio implementation is the way to get manufacturers to implement better solutions regardless of what their supplier gives them. Blaming their supplier gives them a cop out. Blaming ASUS gets them looking for innovative solutions and asking nVidia to supply them with better options integrated into future chipsets.
  • phusg - Friday, November 4, 2005 - link

    quote:

    nVidia supposedly had little demand for soundstorm because motherboard manufacturers weren't ordering enough. At least that's the story that was fed to us.


    Also the motherboard manufacturers complained at the high cost of the Dolby Digital Live licence (something like $5 a chipset if I remember rightly). I've always said nVidia should go have a chat with the competitors DTS. Wouldn't that be something?
  • DanaGoyette - Friday, November 4, 2005 - link

    I've been pondering this for a while:

    Since the nForce4 x16 northbridge uses Hypertransport to communicate with its southbridge,
    and the nForce2 southbridge uses HyperTransport to communicate with its northbridge,

    Shouldn't it be possible to replace or supplement the nForce4 southbridge with the nForce2 MCP-T and use its APU? Either that, or combine it with the nForce Professional MCPe?

    Even better, use the nForce2 MCP-T with the GeForce 6100/6150 northbridge for integrated audio and video!
  • psychobriggsy - Friday, November 4, 2005 - link

    It all depends on whether the southbridge used (a standard nForce4 SLI) has a downstream HyperTransport link.

    I imagine it doesn't, therefore you have: [CPU]===[nF SP100]===[nF SLI]

    I suppose you could connect an ULi PCIe southbridge to a couple of spare PCIe lanes for it's built in Azalia audio, and another bazillion SATA ports, IDE ports and USB ports, lol.
  • DanaGoyette - Friday, November 4, 2005 - link

    Er, I didn't mean nForce Professional AND nf4 with the MCP-T, I meant one or the other. I wonder if it's even possible to use the NF2 southbridge like this. I believe the BIOS might take some work, but you never know until you try!


    [CPU] - [nF Pro] - [NF2 MCP-T]
    [CPU] - [SLIx16] - [NF2 MCP-T]
    [CPU] - [gf6100] - [NF2 MCP-T]
  • yacoub - Friday, November 4, 2005 - link

    This board is definitely on my list to track pricing. If this thing comes down enough I'll be getting this when I build my new system instead of the older Asus SLI-Premium I was looking at.

    Hopefully Asus soon releases that sweet passively-cooled 7800series card (hopefully a GT) as well. It debuted in this article: http://www.anandtech.com/tradeshows/showdoc.aspx?i...">http://www.anandtech.com/tradeshows/showdoc.aspx?i...
  • yacoub - Friday, November 4, 2005 - link

    Can you mount an XP-90 on the processor without interfering with the heatpipes or MOSFETs around the socket?
  • yacoub - Friday, November 4, 2005 - link

    Did you guys test any of the aftermarket cooling systems like the XP90 and XP120 for clearance? That's rather important to overclockers, especially on a board like this!

Log in

Don't have an account? Sign up now