Memory Stress Testing

The Asus easily handled 2-2-2-7-1T timings at stock speed, as do almost any of the current boards for AMD Socket 939 from NVIDIA, SiS, VIA, and ULi. The board was completely stable at "Auto" voltage or the lowest "2.6V" memory voltage setting.

Stable DDR400 Timings - 4 DIMMs
(4/4 DIMMs populated)
Clock Speed: 200MHz
CAS Latency: 2.0
RAS to CAS Delay: 2T
RAS Precharge: 7T*
Precharge Delay: 2T
Command Rate: 1T
*7T was determined by MemTest86 benchmarks to deliver the widest bandwidth with the NVIDIA nForce4 chipset. While the board would operate at tRAS of 5T or lower, all benchmarks were run at 7T for best performance.

Stable DDR400 Timings - 4 DIMMs
(4/4 DIMMs populated)
Clock Speed: 200MHz
CAS Latency: 2.0
RAS to CAS Delay: 2T
RAS Precharge: 7T*
Precharge Delay: 2T
Command Rate: 2T

Tests with all four DIMM slots populated on the A8N32-SLI required a 2T Command Rate with 4 DIMMs in two dual channels. The 2-2-2-7 timings were still completely stable at minimum voltage. This is the pattern seen on every other top-performing Socket 939 board, except the recently tested ATI RDX200. The DFI ATI can actually defy the laws of AMD and run 4 DS DIMMs at a 1T Command Rate to about DDR405. The performance of the Asus is completely competitive with other top-line NVIDIA chipset motherboards for Socket 939.

Overclocking: Asus A8N32-SLI Deluxe Test Setup
Comments Locked

95 Comments

View All Comments

  • Wesley Fink - Friday, November 4, 2005 - link

    Both the Asus and DFI were definitely running 1 x16 in single video card mode. The single video card results - using the same 81.85/6.82 drivers, video cards, CPU, and memory - were the most surprising results. I really don't have an explanation for the performance differences here, since there is very little performance difference in older titles but a large difference in the just released games. We are hoping nVidia can shed some light on these benchmark results.
  • n7 - Friday, November 4, 2005 - link

    This actually looks like a very good mobo.

    However, knowing Asus, i'm sure we will we won't find it reasonably priced anywhere.

    If it came down in price, & they offered a non-SLI version for those of us who don't want SLI, i'd get interested :)
  • aLeoN - Friday, November 4, 2005 - link

    What kind of rich enthusiast wouldn't want to spend top dollar for the top of the line equipment? Don't get me wrong, I'd like exactly what you do but they've only changed to 8 phase cooling and x16 sli over the current nf4 boards right? Imo it doesn't sound like a very profitable idea if you threw phase change cooling onto an A8N-E but I'll keep my fingers crossed for the both of us.
  • Zebo - Friday, November 4, 2005 - link

    hehe - the real trick is turning pyrite into gold..Tortise into hare... Anyone can empty thier wallet out or max thier credit card out, as the case may be, on top of the line eqiupment. Takes real skill to turn budget parts into them. IMO.
  • aLeoN - Friday, November 4, 2005 - link

    Right on man! I have a friend who demands near top of the line and doesn't hesitate to have something better than our circle of friends. I'm planning a OC rig for just about a grand that would topple his $3000+ (invested in over a couple years) rig, forcing him to upgrade it with his $1500 now (he was saving it till something good came out or me and a couple other friends get something better). It's people like these that drive our economy! =D
  • gnumantsc - Friday, November 4, 2005 - link

    Wes the chart for Far Cry on Single Video shows a percent increase of 0.4% with the numbers showing 74.3 vs. 47.5. Shouldn't it be 74.5?
  • Wesley Fink - Friday, November 4, 2005 - link

    The chart is correct, and I did a dyslexic in the table. The correct numbers are 47.3 nad 47.5. The table has been corrected.
  • Zebo - Friday, November 4, 2005 - link

    Yes sir just gunna have to wait for another C51 review to see if it's nV's chipset or something ASUS is doing. Definity shocking to see large performance gaps like that so I'm sure you tested and retested and retested after that too.
  • Wesley Fink - Friday, November 4, 2005 - link

    Sorry, I will fix the Typo. I made sure all jumpers were reset to single video mode on the DFI and double checked the readout in BIOS before runnign single video tests.
  • Phantronius - Friday, November 4, 2005 - link

    Damnit, I spent alot of money on my Asus A8N Premium board. Grrrrrrr...!! I want a 17% boost in single card performance!!!

Log in

Don't have an account? Sign up now