Gaming Performance

We have already taken a look into gaming performance under CrossFire when Gigabyte sent us some preproduction samples. We reran the numbers on ATI's final boards and drivers and here is what we ended up with.

The numbers with no AA show CrossFire doing very well; even beating the 7800 GTX SLI in the very CPU limited Halflife 2. A bigger deal is that the X850 CrossFire actually outperformed the single 7800 GTX in Splinter Cell: Chaos Theory. Doom 3 generally favors NVIDIA hardware, and while the CrossFire setup can't match the 6800 Ultra SLI, it performs on par with the 7800 GTX. Battlefield 2 is a close race between the 6800 Ultra SLI and the X850 CrossFire setups.

Half Life 2


Doom 3


Splinter Cell: Chaos Theory


Battlefield 2


With AA enabled, CrossFire performs similarly well. The 7800 GTX SLI beats it in Halflife 2 this time around (even though both parts are still essentially CPU limited), and CrossFire gains ground on the NVIDIA parts. The performance impact of AA on NVIDIA hardware is slightly greater than on ATI hardware. The AA quality of ATI hardware is also better. Again Battlefield 2 is a close race, with a leadership changes favoring CrossFire.

Half Life 2


Doom 3


Splinter Cell: Chaos Theory


Battlefield 2


For those who wish to look back at our previous CrossFire article, you will quickly see that the CrossFire results have not changed much at all. The biggest difference here is Halflife 2 where CrossFire was already a stellar performer.

We didn't publish the results in the last article, but Battlefield 2 is now performing better having moved away from SuperTiling. The results before were not that bad, but we definitely see better numbers this time around.

Hardware and Power Mode and Hardware Scaling
Comments Locked

76 Comments

View All Comments

  • Questar - Monday, September 26, 2005 - link

    That's because all the video card vendors allow higher resolutions be reducing the video blanking perioed. This gives the card more time to send data, resulting in a higher available resolution.
  • Questar - Monday, September 26, 2005 - link

    Crossfire cards only use 5 watts of power!
  • DerekWilson - Monday, September 26, 2005 - link

    again ... I appologize ... I forgot to hit the update button after I entered in the power consumption.

    idle: 150W
    load: 326W
  • MrSmurf - Monday, September 26, 2005 - link

    That limited resolution and refresh rate is going to the achille's heal of Crossfire.
  • bobsmith1492 - Monday, September 26, 2005 - link

    I'm assuming the article is brand new and yet to be fixed, but in case no one has noticed, the charts on page 4 show the crossfire consuming no power. While I'm sure that would be everyone's goal, I don't think it's right somehow.
  • DerekWilson - Monday, September 26, 2005 - link

    very sorry -- forgot to hit update after I filled in the info

Log in

Don't have an account? Sign up now