Aspire X-QPack: A Lanparty Dream
by Joshua Buss on July 2, 2005 1:15 PM EST- Posted in
- Cases/Cooling/PSUs
Installation Cont'd
After connecting up all the cables, including the two sensors for the front-mounted temperature display, we were ready to put the custom-sized power supply back in. It is this step which reminds you just how tight everything is in this unit, but keep in mind we have a nice beefy 420 watt power supply we're working with, not a 250 or 300 watt one like the ones that come with most small form factor pc's.
Click to Enlarge
One more shot with everything installed viewed from the other side. Here one can see what we meant by using the extra space up front for 'cable management'. We should note how if our motherboard had supported external USB and Firewire connections, some of that cable clutter would be greatly reduced.
Click to Enlarge
With everything installed, it's time to put the cover back on. This is when one of the only real problems we found with this case came to light. While we didn't actually cut ourselves working on the unit, in putting the cover back on one of the side windows came down across the HDD cage and received a nasty scratch. We checked the edge and it did not appear to have been deburred at all. We looked carefully at other edges in the case and came to the conclusion that hardly any of them had been smoothed out. Many of the edges had been tucked around into bends though, which explains why we didn't hurt ourselves working on the case. Just be sure to be careful and it should not be too much of a problem, but then again Aspire could have put just a little extra attention to detail in there and made sure all the edges had been smoothed over.
Once the cover was replaced, we noticed how overall the windows do a nice job of showing off the internal components. Here is a small gallery of pics just showing the case with everything installed, some with the unit powered on to show the LED fans.
Click to Enlarge
Click to Enlarge
Click to Enlarge
Click to Enlarge
Click to Enlarge
Click to Enlarge
Facebook
Twitter
RSS
66 Comments
View All Comments
SilthDraeth - Sunday, July 3, 2005 - link
In response to my above post, I simply mean to convey that if this case does well at heat disipation, and providing a well designed, thoughtful case for the microATX formfacter, then the only disadvanage you could say it has compared to say a microBTX or any other small form factor design, would be the inability to support those motherboards. In all things buy what works best for you.SilthDraeth - Saturday, July 2, 2005 - link
Anyone that reads Porkster's comments knows he is anti AMD. But Porkster, if not micro atx, then what form factor?slashbinslashbash - Saturday, July 2, 2005 - link
I agree, great review. I too have been thinking about building a SFF PC, and this case adds a lot of options. I especially like that it can handle extra PCI slots and 2 optical drives. The handle is pretty cool too :)Tamale - Saturday, July 2, 2005 - link
I dunno man.. with cases this well designed and intel under so much fire I think atx is here for a long time yet to comeNordicNINE - Saturday, July 2, 2005 - link
#20, I was thinking of using that board for a Media Center PC since it has a DX9 video onboard.I had one earlier for a client and played with it a bit before hand. Plenty for a HTPC (MCE2k5) machine.
I wish it had a DVI port though since I want to get a DLP TV later this year.
porkster - Saturday, July 2, 2005 - link
Pity it's ATX. It's a bit late int he day to be making ATX cases..
kaborka - Saturday, July 2, 2005 - link
I've had my eye on the MSI microATX board with the RS480 chipset for building a HTPC. It has the onboard Radeon graphics + it's socket 939. This looks like it might be just the box for it. (Dunno if this board has 1000MHz HT, though.)NordicNINE - Saturday, July 2, 2005 - link
I was just going to buy this case.I hope this review doesn't make it harder to find. :)
Noriaki - Saturday, July 2, 2005 - link
Hey, great timing. I've been thinking about shunting my current machine as is over to a Linux box and building a brand new gaming rig. My Athlon XP2100+ is a little slow these days ;)And I would love for it to be a nice compact case for LANing. This article couldn't be better timed.
Are there any MicroATX boards that support 1000Mhz HyperTransport and the dual core Athlon 64s? I understand Via's chipset is a bit sketchy on A64x2s, and the K8M800 is 800 HT only I believe.
Tamale - Saturday, July 2, 2005 - link
lot of good questions here... I'll try to answer as many as possible..first off, yes, I wish I could've put in a more detailed review of the power supply itself - I'm currently working on getting a testbed that would be much more stressful to see how power supplies will stand up to it.
as far as dimensions, stromgald is right that it has the right mounting hole positions but that it's just shallower.. if you had a particularly shallow optical drive and/or were careful with the cables you could probably use a normal PSU.
I did have two hard drives installed at the end.. the seagate (sata) is behind the western digital (pata).. this was my attempt at putting as much of a load on the power supply as I could and seeing how the case handled the extra heat.
my comment about the excess cable clutter was simply an attempt to say that if our motherboard had the headers for extra usb/firewire cables I could've routed those cables to the appropriate places on the mobo instead of just cramming them up front.
I hope to get a system for testing power supplies in a much more informational manner very soon.