Aspire X-QPack: A Lanparty Dream
by Joshua Buss on July 2, 2005 1:15 PM EST- Posted in
- Cases/Cooling/PSUs
Installation
Due to the component-like nature of the X-QPack, installing our test bed was very straightforward, albeit slightly lengthy. Our motherboard fit on the tray without any problems.
Click to Enlarge
We put the hard drives into the cage and slid the completed motherboard tray into the unit.
Click to Enlarge
We were then ready to put our DVD burner in. We do feel that the case could've benefited from tool-less features during the installation process, but with this style of chassis it might not have been very feasible.
Click to Enlarge
One can see how tight for space things are inside a case of this size, but everything considered it was actually quite easy to work in because of the careful planning of component placement.
Click to Enlarge
Facebook
Twitter
RSS
66 Comments
View All Comments
KristopherKubicki - Monday, July 4, 2005 - link
Zepper: The fragbox is Falcon NW, not Alienware. It's based on a design from FIC as far as I know.Kristopher
Zepper - Monday, July 4, 2005 - link
The Aspire X-QPack is a variant of the Chenming 118 which I like better than the QPack as you can get it w/o any windows or with just one. It also has an interesting PSU in the Enermax 270W SFX mode - only 300W but 20A available on the +12V rail in a pinch. It's between that and the Enermax Venus series for my mATX builds. The supplied PSU should work well in most systems - but perhaps not in the freakazoid ones that many AT denizens seem to favor ;-) .A bit more FYI: Sony=LiteOn they are "technology partners" on optical drives as are NEC-Pioneer-Asus, Plextor-Sanyo, Hitachi-LGE (Goldstar), Toshiba-Samsung, Ricoh-AOpen and Philips-BenQ.
#21 - Well then, it must be great that this case is micro ATX - the wave of the future... [rolling eyes]
#28 - Micro-BTX - yes another doomed Intel "innovation". Putting the slots on the right and the PSU on the left - BFD. Anyhoo, newegg carries a couple of micro-BTX cases perhaps mobos too.
#38 - The Silverstone sg01 is supposed to be based on the Alienware Fragbox which SST designed for Alienware. And it's just as overpriced ~$200 sans PSU. Sorry Charlie...
#41 - It's not a PS/3 it's just a bit shorter than a normal ATX (the PS/3 is A LOT shorter than standard) - I believe the form factor is called "mini-ATX"
#42 - It can hold a standard size ATX PSU but you should probably use a short chassis optical drive (as mentioned above) if you do go that route. In fact, the short chassis drives fit best in most mATX cases. There are other short chassis drives besides the LiteOn based ones.
.bh.
Tamale - Monday, July 4, 2005 - link
in response to #40..my test unit was extremely sturdy.. I didn't find the back to be flimsy at all
as far as all the harsh comments against the 420 watt power supply, I'd just like to remind you all that lots and lots of people are still using generic power supplies rated for much less than 420 watts... if people are getting by fine with power supplies like that, I'm pretty certain a 420 watt from aspire would serve you fine for just about everything you could cram in a computer this small
I'll be taking a closer examination of all these power supplies as soon as I can...
yacoub - Monday, July 4, 2005 - link
Irrelevant. If it can't fit a real PSU made by a reputable name (Antec, Seasonic, or maybe Enermax), forget it.sprockkets - Sunday, July 3, 2005 - link
That power supply appears to be a ps3 form factor. Like others said, if this is true, it's a full size atx power supply with low depth. They exisit, but are not popular. FSP makes a 250w model for $30. 420w is stretching it a bit as to what that thing can put out, but whatever.mindless1 - Sunday, July 3, 2005 - link
I disagree about it being sturdy, the back in particular is necessarily flismy.Aspire is not a name to trust in power supplies either, this looks like another liability.
I like the front bezel though and the general concept. If this were made in thicker aluminum and without power supply (or a Delta), I'd buy it.
yacoub - Sunday, July 3, 2005 - link
Well, let's see:*Be able to fit a full-size ATX PSU.
*Get rid of the stupid lights/lighting.
*Enough room to fit at least an XP-90 HSF setup
Then I'd probably buy one.
R3MF - Sunday, July 3, 2005 - link
if you want a pretty mATX case then what you really want is this:http://www.silverstonetek.com/products-sg01.htm
it would be a tempting prospect for me had i not just bought a shuttle.
there are some okay nForce4 s939 boards available in mATX, but a manufacturer needs to make a high-end nForce4 Ultra/SLI mATX board.
come on MSI...............
sprockkets - Saturday, August 6, 2005 - link
$188 for the case at newegg.com, that's like shuttle xpc expensive.Questioner - Sunday, July 3, 2005 - link
For people who want to know what AMD mATX boards that are avaiable go to Newegg and choose socket 939 then mATX and it will show about 5 boards 1 being the Foxconn NF4 and the rest is Radeon Express boards, 1 from MSI, 1 from ECS, 2 from Jetway the only difference being that one has video memory on the motherboard, but the Jetways are from what I heard are very overclockable. The MSI and ECS board are the same except for different bios tweaks and the ECS is more overclock able than the MSI. For 754 boards there are 15 of them but they are only VIA and SIS chipset boards.