Highest Memory Speed Performance

Highest Memory Speed Gaming Performance

Highest Memory Speed UNBuffered Memory Test

Highest Memory Speed Standard (Buffered) Memory Test

Highest Memory Speed Calculation Performance

Highest Memory Speed Gaming Performance

Highest 1:1 Memory Speed


DDR533/2.4GHz Peformance Highest Performance
Comments Locked

67 Comments

View All Comments

  • Wesley Fink - Friday, March 4, 2005 - link

    #26 - You need to take a close look at DDR400 2-2-2 VX vs. DDR400 2-2-2 with any other ram we have tested. The biggest news with VX is how fast the chips are at the same speed and timings compared to other chips, which we talked about in the article. There IS a difference in performance from DDR400 2-2-2 to DDR533 2-2-2 at the same clock speed but it is smaller than many imagine as I pointed out in the review. We have set up our AMD tests to really measure the impact of memory - removing as many other variables as possible.
  • Beenthere - Friday, March 4, 2005 - link

    Sorry but I don't see any justification for over-voltage RAM as the system performance increase is marginal at best. The cost doesn't justify the minimal gains. In addition more voltage = more heat, any way you slice it. This is more marketing hype and no measurable system performance increase as we've seen before from OCZ. Between OCZ and "DFI's gullible PC enthusiast product line", I'm sure they are laughing all the way to the bank. PT Barnum was correct...
  • ChiefNutz - Friday, March 4, 2005 - link

    The Article said that fourm rumors said the chips were built by winbond. I Though winbond left the memory market? anyone know any different??
  • Wesley Fink - Friday, March 4, 2005 - link

    Obviously the RTCW-ET results with VX at 2-3-2 are 116.7 with 61.77 vs. 119.3 with 71.80. This compares to our previous fastest 2-2-2 DDR400 at 110.8. We really do need the ability to correct in the comments section :-)
  • Wesley Fink - Friday, March 4, 2005 - link

    #15 - I did test with 61.77 to make sure the results were not too skewed by the newer 71.80 driver. Q3 and RTCW are slower with 61.77 but this is offset by the memroy bandwidth scores being higher. I just quickly ran 61.77 at 2-3-2-6 and 2,.6v since that was your greatest interest. Q3-554.1 (vs. 567.4), RTCW-ET-116.7 (vs.199.3), Sandra UNbuffered-2949 (vs.2927). The 61.77 results at 2-3-2 are still significantly higher than any 2-2-2 results at 400.

    #17 - In our launch review we clearly showed the MSI Neo2 to be the same performance as nF4. We have also shown in the past that AGP and PCIe using the same card are the same performance. Since the MSI does not support these extreme voltages we had to make some changes to test VX - which we detailed in the review.

    I realize many of you do not want to believe that a memory running 2-3-2 can outperform another memory running 2-2-2 at the same speed, but this is not unique to VX. It is just that VX is an extreme example of a chip being faster at the same speed. Go back to benchmarks that included BH5 and you will see it is faster than TCCD at the same speed and timings.
  • LX - Friday, March 4, 2005 - link

    Another typo: "OCZ LANParty nForce4"
    Hey, Anand, let Wesley have some sleep between reviews!
  • chr6 - Friday, March 4, 2005 - link

    typo on last page, its enhanced bandwidth not extended, if i remember correctly.
  • chr6 - Friday, March 4, 2005 - link

  • EddNog - Friday, March 4, 2005 - link

    "Pwned."

    No, really...

    "Pwned."
  • Rocket321 - Friday, March 4, 2005 - link

    Now that you wont need all that extra ocz platinum r2, feel free to send some my way ;)

Log in

Don't have an account? Sign up now