Gigabyte K8NXP-SLI: Features and Layout

 Specification  Gigabyte K8NXP-SLI
CPU Interface Socket 939 Athlon 64
Chipset nForce4 SLI (single chip)
BUS Speeds 200MHz to 400MHz (in 1MHz increments)
PCI/AGP Speeds Asynchronous (Fixed)
PCI Speeds 100MHz to 150MHz in 1MHz increments
Core Voltage Auto, 0.80V to 1.75V in 0.025V increments
DRAM Voltage Normal, +0.1V, +0.2V
Chipset Voltage Normal, +0.1V, +0.2V, +0.3V
Hyper Transport Ratios Auto, 1x to 5x in 1x increments
LDT Bus Transfer 16/16, 16/8, 8/16, 8/8
LDT Voltage Normal, +0.1V, +0.2V, +0.3V
CPU Ratios Auto, 4x to 25x in 0.5x increments
Cool'n'Quiet MAX FID Auto, 8.0 to 13.0 in 0.5x increments
DRAM Speeds Auto, 100, 133, 166, 200
Memory Command Rate Auto, 1T, 2T
Memory Slots Four 184-pin DDR Dual-Channel Slots
Unbuffered Memory to 4GB Total
Expansion Slots 2 x16 PCIe Slots
2 x1 PCIe
2 PCI Slots
SLI Setup Movable PCB Card
Onboard SATA 4-Drive SATA 2 by nF4 PLUS
4-Drive SATA by Sil3114
Onboard IDE Two Standard nVidia ATA133/100/66 (4 drives)
SATA/IDE RAID 4-Drive SATA 2 PLUS
4-Drive IDE (8 total)
Can be combined in RAID 0, 1
PLUS 4-Drive SATA by Sil3114
Sil3114 Raid 0, 1, 5
Onboard USB 2.0/IEEE-1394 10 USB 2.0 ports supported nF4
3 1394B FireWire 800 ports by TI chip
Onboard LAN Dual Gigabit Ethernet
PCIe by Vitesse VSC8201 PHY
PCIe by Marvel 88E8053
Onboard Audio Realtek ALC850 8-Channel codec with 6 UAJ audio jacks, CD-in, front audio, and coaxial SPDIF In and Out
Other Features Gigabyte Dual BIOS
BIOS Award 2/01/2005

The shipping Gigabyte BIOS for the K8NXP-9/K8NXP-SLI family provides a wide and useful range of adjustments for many features, with the notable exception of a very limited range of memory voltage adjustments compared to other boards in the SLI roundup. As is the Gigabyte custom in recent designs, Advanced Chipset Features (and Memory Timings) can only be seen when you hot press CTRL+F1 while in the BIOS. HyperTransport adjustments are also provided in the hidden Advanced Chipset Features menu.

There are no BIOS options for adjusting or controlling SLI. This is handled in the nForce4 platform drivers and the nVidia graphics drivers.

The Gigabyte K8NXP-SLI, like the sister K8NXP-9, was designed as a top-of-the-line nForce4 motherboard. As the flagship model, it sports all the top Gigabyte features.

The SLI version features start with the trademark DPS daughter card that you can see on the right of the board picture. This is used to increase power reserves and stability by increasing the board to 6-phase power. You can see the DSP slot to the left of the CPU, and the trademark Gigabyte dual BIOS chips to the right of CPU. This Gigabyte feature provides back-up BIOS in the event of a bad flash or unstable BIOS setting.

Gigabyte provides eight SATA ports. Four ports are 3Gb/s ports provided by the nForce4 chip, and the four additional are the 1.5Gb/s ports driven by the Silicon Image 3114. The 2nd group of ports is useful, but they would have been much more exciting if they had been 3Gb/s ports like those provided by nForce4. They do support Raid 5.

We are pleased that Gigabyte uses the nF4 on-chip Gigabit LAN by supporting it with a Vitesse (Cicada) Gigabit PHY. Gigabyte then goes one step further by including a second Gigabit LAN on the PCI Express Bus. This second LAN is also removed from the constraints of the slower PCI bus as it resides on the much faster PCIe bus.

Audio is AC '97 2.3, supported by the popular 8-channel Realtek ALC850. The K8NXP-SLI9 includes a wide range of audio I/O provided to make the most of the 850 chip. This includes 6 programmable audio mini-jacks and coax SPDIF in and out - all on the rear panel.

A pioneering feature for Gigabyte has been their support of high-speed 1394B Firewire on their boards. This continues with the K8NXP-SLI with 2 ports capable of 800MB/s or Firewire 800. This is double the speed of 1394A for those looking for fast Firewire access.

From a feature, board layout, and BIOS options point of view, the K8NXP-SLI can be considered the twin of the K8NXP-9. The only real change is the replacement of one PCI slot with a second PCIe video slot. All the good things about the features and layout of the K8NXP-9 are still here in the K8NXP-SLI.

DFI LANParty nF4 SLI-DR: Overclocking and Stress Testing Gigabyte K8NXP-SLI: Overclocking and Stress Testing
Comments Locked

108 Comments

View All Comments

  • chucky2 - Monday, February 28, 2005 - link

    Typo on Page 20: I don't think you hit F3, it's F6.

    Chuck
  • ajmiles - Monday, February 28, 2005 - link

    Wesley, would it be possible to get a reply to the comment #6 i wrote? ASUS worked closely with you to resolve the dual 6800 ultra issue, but they just stonewall me and everyone else regarding the overclocking at 1T issue.

    Perhaps if someone with some "muscle" in the hardware reviewing world were to push them for a response you could get one out of them?

    Thanks, Adam Miles
  • teng029 - Monday, February 28, 2005 - link

    #52 - i don't envy what you have to go through. i've had the misfortune of trying to get tech support from asus sometime ago and it was like pulling teeth.

    #29 - i agree. while i would love to have two 6800 ultras or GTs in SLI, the fact of the matter is i can't justify the cost. so instead i'm going with two 6600GTs. although this is apparently not a very popular choice, the fact remains that this configuration is still going to be substantially faster than my current setup using a 9700 pro and it costs about the same as my 9700 pro when i bought it.
  • teng029 - Monday, February 28, 2005 - link

  • giz02 - Monday, February 28, 2005 - link

    I just noticed that the MSI board lacks additional PCIe boards, where the DFI board has an additional 1x and 4x slot. Anyones opinion on the importance of this?
  • roostercrows - Monday, February 28, 2005 - link

    I just have to mention to my fellow anandtech members that I have an ASUS A8N-SLI board and I have been trying to get through to their "tech support" Friday and all Monday morning with absolutely no luck whatsoever! You can't even get through to anyone. So, when considering a motherboard keep this in mind. My experience with their "tech support" has been the worst you can imagine. Well...at least they weren't rude or incompetent.... they just aren't there.
  • drewski - Monday, February 28, 2005 - link

    too bad the non-sli from MSI doesn't use the SB audio
    http://www.msi.com.tw/program/products/mainboard/m...
  • giz02 - Monday, February 28, 2005 - link

    Sorry page 5-11
  • giz02 - Monday, February 28, 2005 - link

    Heinrich,
    Did you configure the settings as per page 5-12 in the manual to passthrough on the decoder?
  • THILE - Monday, February 28, 2005 - link

    How did you make the Gigabyte run 4x dimms at 200mhz?
    I have this new motherboard GA-K8NXP-SLI and 4x of kingston hyperx pc3200 (KHX3200UlK2).
    And running a new AMD athlon64 3500+ 90nm

    I use SPD settings for the memmory. T2 is enabled.
    Do I then force 200 mhz it just frezes.

Log in

Don't have an account? Sign up now