OCZ PC3200 Platinum Rev. 2

Manufacturers have used well-known names from their BH5 product days for their latest PC3200 2-2-2 memory, and OCZ has done the same. One of our stock test memories for the past year has been OCZ PC3500 Platinum, which was based on Winbond BH5 chips. OCZ is calling their latest 2-2-2 PC3200 Platinum Rev. 2. OCZ offers the new Revision 2 as either 512MB single dimms or a 1GB (2x512MB) Dual-Channel kit.

Test DIMMs were a matched pair of PC3200 Platinum Rev. 2 with platinum-colored heatspreaders.



OCZ sports a lifetime warranty, like several other enthusiast memory manufacturers, but we also receive numerous emails from customers who are surprised and pleased with the responsiveness of OCZ customer support. Once a customer contacts OCZ customer service, they appear to get very quick resolution to their problems.

OCZ PC3200 Platinum Revision 2 Specifications

 OCZ PC3200 Platinum Rev2 Memory Specifications
Number of DIMMs & Banks 2 DS
DIMM Size
Total Memory
512 MB
1 GB
Rated Timings 2-2-2 at DDR400
SPD (Auto) Timings 2-2-2-6
Rated Voltage 2.75V

As seen with the other low-latency DDR400 in this roundup, the 3200 Platinum Rev. 2 is specified with a higher than normal voltage at DDR400. 2.75V is higher than the 2.5V to 2.6V that is standard for memory on most motherboards, but it should be available on most of the high-end boards that would likely be used with this DDR400 memory. You should check your specifications to make sure that you can support the voltage needs of the new OCZ PC3200 Platinum Rev. 2 modules. However, we had no problem with the PC3200 Platinum Rev. 2 at stock voltage at DDR400, though we did need more voltage at higher speeds.

Mushkin PC3200 Level II V2 Performance Test Configuration
Comments Locked

47 Comments

View All Comments

  • Wesley Fink - Thursday, August 5, 2004 - link

    #26 - DDR460 2-2-2 at 2.75V according to my review notes
  • babyelf - Thursday, August 5, 2004 - link

    Hi

    It's said that the crucial did 2-2-2 up till DDR460. At what voltage is that?
  • DreamInBlue - Thursday, August 5, 2004 - link

    crucial has always been highly overclockable. my regular cas3 ddr400 crucial does cas 2.5 at 250fsb.
  • bigtoe33 - Thursday, August 5, 2004 - link

    vie2233hil

    You quoting performance series and not Platinum rev2

    Platinum rev2 uses TCCD and was used for this roundup.
  • vie2233hil - Thursday, August 5, 2004 - link

    OCZ would like to to announce a revision change in our PC-3200 Performance Series line of memory. PC-3200 Revision 2 has been discontinued and replaced by OCZ PC-3200 Revision 3 DDR.

    OCZ PC-3200 Revision 3 DDR is specified for CL2-3-3-6 timings o­n Intel-based systems and CL2.5-3-3-6 timings o­n AMD based systems. The lifetime warranty of existing PC-3200 Revision 2 modules will not be invalidated by this change.
  • Pumpkinierre - Thursday, August 5, 2004 - link

    Nice article, nice charts and nice memory. With all the extra work from the new components let's hope you're still having fun, Wesley. Keep the i875 going. I'm not sure about the nf3 if the tRAS has to be set to >10. Any chance OCZ might be releasing a CAS2 DDR500 in the near future with that new batch of Samsung chips?

  • Potem - Thursday, August 5, 2004 - link

    #19 - From page 9: "We have seen reports of some variability in the performance of the Ballistix memory, and overclocking results are never guaranteed. However, our results with another pair of Ballistix DIMMs were very similar."
  • JustAnAverageGuy - Thursday, August 5, 2004 - link

    #18

    As long as it is a reputable vender, quantity is often better than quality. :)

    i.e. 256MB of 3500 level 2 mushkin extreme blah blah is probably going to perform worse than 1GB of corsair value ram.
  • Lazzydog - Thursday, August 5, 2004 - link

    Wesley you have still yet to comment on the question of whether or not the crucial sticks were cherry picked or not. I know in a lot of reviews you try and get your products as anonymously as possible is this true with the crucial ram or not? If not these could hardly be indicative of ram that the rest of us could get and should be known for people who plan on purchasing ballistix ram.
  • GabeyD - Thursday, August 5, 2004 - link


    Is there a comparison anywhare of "Value" memory against this high end, high $ stuff. For example, I cag get 1G of Coorsair Value for $180 and the lest expensive high end memory is about $280, a $100 difference. How much real performance is this $100 getting me?

Log in

Don't have an account? Sign up now