Monitor

Recommendation: Samsung 955DF (19") DynaFlat CRT
Price: $212 shipped



To this day, the 955DF is still one of the best bang-for-the-buck 19" monitors on the market. The .20mm dot pitch, max resolution of 1600x1200 @ 68Hz, and well known reliability, usability, low price and picture quality of this monitor are all reasons why we highly suggest taking a look at it. We've had extensive experience with this monitor, having done a review of it back in April 2002. To this day, we are still impressed with this monitor and can still confidently recommend it. As you may have guessed by now, CRT technology (especially in the bang-for-your-buck price range) hasn't moved much in quite some time, but that is the norm in this industry. So, don't be surprised if we continue to recommend this monitor for mid-range Buyer's Guides for some time.

Alternative: NEC Diamondtron 19" CRT (model DP930SB-BK)
Price: $326 shipped



This NEC model is one of the best mid-range models of the famous Diamondtron series of monitors. Max resolution is 1920x1440 and dot pitch is an excellent 0.24mm. However, the clarity and refresh capability of this monitor are much better than the 955DF. So, if you're willing to dish out the cash, this is more than a capable alternative.

Computer Case Recommendation: CaseEdge TS1 Mid-Tower
Price: $40 ($72 shipped with 360W Enlight PSU)



While we recommended this case last week, we can't help but recommend it again because of just how good it is for the price. You can purchase this case online at www.pcclub.com or pick it up at a local PC Club. Not only is the black and silver edition of this case very good-looking, the set-up is very easy to use and convenient in general. For one, the motherboard mounting screws come installed in their proper holes, a welcome change from having to screw them in by hand. Secondly, the hard drive and optical drive bays contain plastic clips that allow you to install your drives simply and easily without screws. All in all, this case basically comes completely "preinstalled", and even includes a 300W PSU (power supply unit). However, unlike last week's system, this week's system requires a higher quality PSU and slightly higher wattage. We suggest an Enlight 360W power supply (model # 8361934A1), which can be found for $32 shipped online or at a local PC outlet. This will supply the necessary amount of power and stable voltages for your mid-range system.

If you're looking to pick up this case from a local retail outlet, we suggest the nearest PC Club.

If you cannot find the lowest prices on the products that we've recommended on this page, it's because we don't list some of them in our RealTime pricing engine. Until we do, we suggest that you do an independent search online at the various vendors' web sites. Just pick and choose where you want to buy your products by looking for a vendor located under the "Vendor" heading.

Alternative: Antec SLK2650-BQE Mid Tower
Price: $79



Antec is one of our favorite manufacturers due to their superb track record for reliable and powerful power supply units (PSUs). They also make some excellent computer cases, though we've never felt it worthy of recommendation before. Still, they certainly make a case worthy of an alternative pick, especially when they include good fans for proper ventilation and relatively well organized interior space. It may or may not be aesthetically pleasing to some, though we are fairly fond of its style and attractiveness (black with silver grey side panels). Probably the best feature about this case is the fact that it's designed well for users who are sensitive to noise; its steel construction and large (120MM) case fans makes it an exceptionally silent system with mid-range hardware installed.

Memory and Video Sound Card and Speakers
Comments Locked

26 Comments

View All Comments

  • Pollock - Friday, July 16, 2004 - link

    Unless I'm mistaken, that's not a picture of the Antec BQE, but rather a slightly different Antec case.

    http://www.newegg.com/app/ViewProductDesc.asp?desc...
    http://www.newegg.com/app/ViewProductDesc.asp?desc...

    Of course, Newegg could also have the pictures wrong, I just don't feel like looking anywhere else.
  • jediknight - Friday, July 16, 2004 - link

    #4:
    Chances are, if you upgrade to a dual channel (I'll assume within 2 years):
    a) Your DDR memory will be obsolete - everything will be DDR2 or it's successor
    b) 512MB of RAM will not be enough, even for an entry level system

    Best to recommend a single 512MB stick, IMO.. gives you room to upgrade.
  • nullpointerus - Friday, July 16, 2004 - link

    Just got done building a new PC to act as a home video server + console emulator, and I have a few recommendations:


    NewEgg.com
    -- Aspire cases ~$55 shipped, very nice for the price
    -- Geil 512MB PC3200 6-3-3-2.5 for ~$82 shipped

    eBay
    -- Radeon 9700 Pro $132 shipped (have to be somewhat lucky)

    Also, why recommend a PATA drive when SATA drives tend to create less clutter and perform a bit better? I really wouldn't recommend a raptor for a new mid-range system - games have multigigabyte installs these days, and then you need space for music, CDs, movies. IMO it's better for load times to rip your game CDs to a ~3x larger hard drive.
  • crimson117 - Friday, July 16, 2004 - link

    The Casedge TS1 is NOT $40 shipped at pcclub. It's $20 shipping to New York and $11 tax/shipping to California.
  • ir0nw0lf - Friday, July 16, 2004 - link

    PrinceGaz, this is a mid-range system, 1 GB of RAM is overkill for this. 512 MB in a single stick would be ideal here.
  • PrinceGaz - Friday, July 16, 2004 - link

    Generally very good recommendations I'd agree with, and the first choice of hard-drive (120GB Seagate) is an improvement over a noisy 80GB WD.

    However, the choice of memory is still poor. 512MB isn't enough for this sort of system so you have to go for 1GB (2x 512MB modules). Only the high-end system should be using considerably more expensive low-latency modules as they don't offer enough extra performance to justify the increase in price over regular memory. I know it must be tempting after reading all the memory reviews on AT to go with the best memory available, but it offers only a very small real-world performance increase that doesn't justify the much higher price. Go with 2x 512MB sticks of regular brand-name memory (not cheap and nasty no-name memory).

    Even if you do only want 512MB for some reason, you should get a single 512MB stick if you're building the AMD system as the K8N Neo Platinum (like most S754 AMD boards) only has three DIMM slots. You certainly don't want to limit your future upgrade options by filling two of them with 256MB sticks.

    Apart from the memory suggestions, an excellent guide.
  • kherman - Friday, July 16, 2004 - link

    I hope that 3D card you recomended can play Doom!

    Then again, people can always upgrade on their own.
  • Degrador - Friday, July 16, 2004 - link

    I'd have to agree with the memory thing. Time and time again we're shown that the benefit of low latency memory is relatively little, especially considering the premium you pay for it. I always suggest to people buying computers that for the extra cost of low latency, you'd be better off either doubling the ram to 1GB, or upgrading the video card, or getting a faster processor - whatever, all of these will give better performance than low latency memory ever will.

    Also getting 2 sticks of 256MB is as mentioned relatively pointless. A mid-range user is not likely to upgrade anytime soon, meaning either they'll want DDR2 when they do, or they'll want more than 512MB memory. Perhaps if this was an overclocking system, or a high-end, then you could consider them upgrading in future, and what will benefit then. But certainly not for midrange.
  • StormGod - Friday, July 16, 2004 - link

    I will continue to ask AT to assemble these systems and run some benchmarks on them.
  • mino - Friday, July 16, 2004 - link

    #4 Evan,

    You are wrong with that assumption about memory.
    If anyone wanted to upgrade, from this setup to dual, then it makes much more sense to buy another 512 module also, since anyway CPU and MB will have to be replaced.
    256 module as it stands now, are just for office comps (w/256M) or when someone doesn't have left money for 512 module and plans to buy one in the near future.
    For Combo I will also opt for Toshiba parts rather than LiteOn's.

    Overal, except this little nonsense, pretty good guide.

Log in

Don't have an account? Sign up now